Gebruiksaanwijzing /service van het product CAP 600 van de fabrikant Kathrein
Ga naar pagina of 60
Installation and operating manual MobiSet 2 digital CAP 600.
2 CONTENTS CONTENTS .............................................................................................................................. . 2 FOREIGN LANGUAGE INST ALLA TION MANUAL/DISPOSAL ....................................................
3 Dear Customer , Chère Cliente, Cher Client, Gentile cliente, Estimado cliente, GB Y ou can obtain an English version of our installation instructions from our representatives in your country (http://www .kathrein.de/include/kontakte_groups_eng.cfm?kontinent=1&gruppe=SA T) or download one from our homepage (http://www .
4 MOBISET 2 CAP 600 COMPONENTS/SCOPE OF DELIVER Y UFS 740sw (Front view) The MobiSet 2 digital CAP 600 consists of: • T urntable complete with control electronics, pre-assembled planar antenna with .
5 PROPER USE The MobiSet 2 digital CAP 600 is designed to receive digital TV and radio programs via satellite. The automatic positioner is intended to be used as a turntable for the Kathrein satellite dish. The turntable can be used to receive digital TV and radio signals in the frequency range from 10.
6 SAFETY INSTRUCTIONS - IMPORT ANT NOTES Safety during installation work When carrying out installation work in locations where there is a risk of falling, take appropriate safety precautions, e.
7 Road T raf fi c Licensing Regulations (StVZO) The applicable regulations of the StVZO must be observed in respect of fi xed installation of the turntable on a vehicle which is driven on public highways. In particular , §§ 19/2; 30 C; 32 (2) and the EC directive 74/483 EEC are applicable.
8 The antenna will be lowered within 12 seconds of the ignition being switched on (if the unit is in stand-by mode or the UFS 740sw is switched off). Otherwise the control unit that is in use is lowered immediately .
9 • Circular cutter , Ø 38 mm • Flat-bladed screwdriver for M5 screws • Power drill • Galvanised round head screws, depending on the roof structure (Ø: 5 mm, sheet metal screws D 7981, depending on the roof structure) or round head screws D 7985 with washers and nuts • T wist drill, Ø 2.
10 • When selecting the installation position, take into account the range of movement of the turntable (see graphics and the “T echnical Data” chapter). There must be no structures on the roof that would obstruct this range of movement (risk of collision).
11 • Choose an installation position on the roof that is as horizontal as possible or only slightly sloping, depending on the location of the vehicle, since roof inclinations greater than 5° may lead to problems when searching for the satellite.
12 • Mark the positions of the six fastening holes on the roof of the vehicle in a circular pattern. Note: The size of the holes and the choice of fastening screws to be used (not supplied) depend on the type and thickness of the materials used in the roof structure.
13 • Create the holes necessary to secure the mounting plate (Fig. C). • In addition to the screwed connection, the mounting plate and roof gland must be bonded to the roof with adhesive and sealed. This is done using the Sika fl ex ® 291 adhesive sealant supplied, which is ideally suited for this purpose due to its broad range of adhesion.
14 • Ensure before starting adhesive work that the temperature of materials to be glued and the adhesive sealant is between +5 °C and +40 °C. Prepare all necessary fasteners and tools. • Prepare the tube of adhesive sealant in accordance with the instructions enclosed with the tube.
15 Figure: E INST ALLA TION AND CONNECTION • Lift up the turntable and place it carefully on the mounting plate facing in the direction of travel (see illustration Fig.
16 INST ALLA TION AND CONNECTION VERSION WITH EXTERNAL CABLE GLAND (FIG. F) • The external cable gland should not be so far from the turntable that the junction between the two cables projecting from the turntable and the extension cables cannot lie within the interior of the vehicle.
17 INST ALLA TION AND CONNECTION BRIEF INSTRUCTIONS FOR INST ALLING THE TURNT ABLE The sequence of pictures shown illustrates all the necessary installation steps that are required to install the turntable and the BAS 60 planar antenna on the roof of the vehicle.
18 Aligning the mounting plate. Arrow in the direction of travel. Mark out the six holes for securing the mounting plate. Apply Sika fl ex ® 291 adhesive in a wavy line between the two grooves and spread it using a spatula or the like.
19 INST ALLA TION AND CONNECTION The turntable is controlled by the UFS 740sw DVB-S receiver . The cable lengths must be taken into account when choosing the installation location. For suspended installation use the installation kit supplied with the receiver .
20 Remove the wood screws supplied from their transport attachment on the underside of the respective mounting piece (2 pieces). V ertically insert each mounting piece into the fi fth slot from the edge, as shown in Fig. 1. Then push each mounting piece downwards and outwards (see Fig.
21 INST ALLA TION AND CONNECTION • Lay the coaxial cable to the UFS 740sw . • Lay the turntable power supply cable (3-pin plug) to the battery . A void laying the cables across sharp edges and secure the cables against possible cha fi ng points.
22 INST ALLA TION AND CONNECTION Under certain circumstances, problems can arise when the units are connected to different connecting sockets or circuits/earth potentials. If none are available, it is recommended that you connect the connecting sockets for receiver and TV set to the same cable, as depicted in Figure “G”.
23 Important: For operation with two batteries, it must be ensured that the ignition signal earth has the same potential as the power supply battery earth for the turntable.
24 RECEPTION RANGE/FOOTPRINT The footprint is the reception area on the earth that a satellite covers with its transmission beam (spot), within which satellite reception is possible. The transmission power is at its greatest in the centre of this spot – it becomes progressively weaker moving outwards.
25 If repairs to the system or individual components are necessary , contact your specialist dealer or our service centre (see below for address). Never open the turntable yourself! • Do not cut the.
26 POLARISA TION SETTING As supplied, the BAS 60 is mounted centrally on the turntable. In this position, you can also receive signals from satellites with deviations in the degree of longitude (of the typical reception range) of between 15° and 20° from the orbit position of the satellite.
27 POLARISA TION SETTING SAFETY NOTES We strongly advise that users who are not familiar with the installation work should not reassemble the BAS 60 independently . They should contact a technician or engineer . They may fi nd a suitable person on the campsite.
28 The explanation of this installation process is based on the assumption that the entire CAP unit has been properly put together , installed and set up, as described in this installation manual.
29 15. Switch the receiver on fi rstly with the main switch and then with any of the numeric buttons. 16. Y ou will then see the message “Please wait, initialising HDP”. Wait until the message “Position of Astra is not known. Start a search?” is displayed – cancel this procedure by pressing the button.
30 If a defect arises in the electronic controls, after some disassembly work the satellite dish can be returned to the park position (horizontal position) manually . Following this however recalibration by an authorised workshop is always necessary .
31 1. In the centre of the antenna (arrowed) there is a plastic cap. Lever this off with a narrow slot-head screwdriver . 2. Behind the cap is an M8 hexagon head screw . Unscrew these using a 13 mm socket wrench. After removing the M8 screw , a further thread can be seen.
32 TECHNICAL DA T A DIMENSIONS (MM) Direction of travel Mounting plate approx. 17.
33 TECHNICAL DA T A Min. recommended clearance Ø 880 Rotary axis BAS 60 Roof gland Nut Clamping range 20/50 Weight incl. BAS 60: approx. 13.8 kg Mounting plate 145.
34 TECHNICAL DA T A T ype CAP 600 Order no. 20310018 LNB 1 output switchable: V/H (14/18 V), low/high (0/22 kHz) LNB supply voltage V vertical: 1 1.5-14, horiz.: 16-19 Input frequency GHz 10.70-12.75 Output frequency MHz 950-1950/1 100-2150 Oscillator frequency (L.
35 SIKAFLEX ® 291 SAFETY DA T A SHEET 1. Materials/preparation and company designation Data on the product (trade name): Sika fl ex ® 291 Data on manufacturer/suppliers Manufacturer/suppliers: Sika Deutschland GmbH Street/postcode: Kornwestheimer Str .
36 5. Measures for fi re fi ghting Suitable extinguishing media Compatible with all extinguishing media in general use. Special hazard from the product, its products of combustion or gases released .
37 4,4‘ methylene-diphenyl-diisocyanate 101-68-8 Permissible workplace concentration 0.05 mg/m 3 TRGS 900/DE/2004 101-68-8 Permissible workplace concentration 0.
38 1 1. T oxicology data Sensitisation Sensitisation/allergic reactions may occur . Sensitive individuals may exhibit allergic reactions even at very low concentrations.
39 Risk phrases 42 Sensitisation possible by breathing in. Safety phrases 23 Do not breathe in gas/smoke/vapour/aerosol. 45 IN the event of accident or feeling unwell summon a doctor immediately (if possible show the doctor this label). Special identi fi cation of particular components Contains isocyanates.
40 SIKAFLEX ® 291 TECHNICAL DA T A SHEET Sikaflex ® -291 1 / 2 Technisches Merkblatt Version 12 / 2005 Sikaflex ® - 291 Der haftstarke Marine - Dichtstoff Technische Eigenschaften Chemische Basis 1- K Polyurethan Farbe weiss, schwarz, holz Härtungsmechanismus feuchtigkeitshärtend Dichte vor Aushärtung (DIN 53479) ca.
41 SIKAFLEX ® 291 TECHNICAL DA T A SHEET Sikaflex ® -291 2 / 2 Weitere Informationen Internet: www.sika - industry.de, E - Mail: industry@de.sika.com www.sika.com Sika Deutschland GmbH Kleb - und Dichtstoffe Industrie Stuttgarter Strasse 139 D- 72574 Bad Urach Deutschland Tel.
42 CAP 600 OPERA TING MANUAL The operating manual for the CAP 600 If, despite studying this operating manual, you still have questions about getting started with the unit or using it correctly , or if unexpected problems occur , please contact your specialist dealer .
43 All settings on the UFS 740 are made using the remote! IMPORT ANT INFORMA TION FOR CAP 600 BEFORE SETUP This section of the UFS 740 operating manual for the turntable assumes that the UFS 740 and t.
44 FIRST INST ALLA TION Before using your unit for the fi rst time, read the “Safety Instructions - Important Information” and “Installation and Connection” sections. Y ou will fi nd a sample con fi guration for a motor home in the Section “Installation and Connection”, “Connection Example”.
45 FIRST INST ALLA TION Use the buttons here to select the settings for your TV set. When doing this, refer to the operating instructions for your TV set! TV aspect ratio Here you select the TV's picture format.
46 FIRST INST ALLA TION System Use the buttons at “System” to select “CAP 600”. Then press the ! (green) button twice (Channel scan “item 4/5” is skipped). The following display appears: Local time offset Use the buttons to set the time zone variation from UTC (formerly GMT) (e.
47 ALIGNMENT (SA TELLITE SEARCH) The antenna is aligned automatically . After the UFS 740 has been switched on, the turntable automatically moves to the last channel received and the associated satellite position (e.
48 At the margins of the footprints of a satellite (e.g. after a slight change of position), it may be necessary for you to manually correct the setting (not normally required). It is also possible to manually correct the fi ne tuning. Press the button to return to the main menu.
49 CHANNEL (SA TELLITE) SELECTION Providing you are not in a menu, pressing the button calls up the channel list. The following display appears: By pressing the & buttons all channels can be selected in the sequence that they appear in the current channel list and its sorting.
50 If you still want to aim at the satellite, press the button to start the search. After a change of location, the antenna moves to the last position selected.
51 RESET/P ARKING Use the buttons to move to the “Reset the motorised antenna” menu item and then press the button. The following display appears: Press the button to con fi rm the displayed message. The antenna is reset and automatically moves to park position.
52 Y ou have three options for “parking” the antenna. 1. The antenna can be moved to park position by pressing the button twice. 2. Press the button to return to the main menu. By using the buttons and the button you can call up the sub-menus (“Settings”, “Antenna Con fi guration”).
53 SPECIAL MESSAGES FROM THE TURNT ABLE The following messages are shown on the screen to protect your reception system and the on-board power supply: SYSTEM PROTECTION MESSAGES The power supply to the turntable is insuf fi cient (battery voltage below minimum value).
54 The turntable motor temperature is in the critical range. The controls can move the turntable only to a known satellite position or to the park position. In addition you receive the message “Last Move done” (to allow the turntable motor the opportunity to cool down, no movements of the turntable are permitted for a few minutes).
55 A serious software error has occurred. Reset the turntable in the CAP menu, or contact our service centre. The motorised antenna software is defective.
56 SPECIAL MESSAGES FROM THE TURNT ABLE The connection to the turntable is defective. Reset the turntable in the CAP menu, check the connections between the turntable and receiver , or contact our service centre. The receiver has lost communication with the turntable.
DECLARA TION OF CONFORMITY EC Declaration of Conformity Manufacturer: Address: Product designation: T ype designation: Relevant article no.: Kathrein-Werke KG hereby declares that the designated product complies with the directives of the Council of the European Union for harmonising the statutory regulati- ons of the member states.
58 FOR YOUR NOTES.
59 FOR YOUR NOTES.
Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 100 444 • 83004 Rosenheim GERMANY 936.3220/-/0907/ZWT - T echnical data subject to change.
Een belangrijk punt na aankoop van elk apparaat Kathrein CAP 600 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kathrein CAP 600 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kathrein CAP 600 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kathrein CAP 600 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kathrein CAP 600 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kathrein CAP 600 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kathrein CAP 600 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kathrein CAP 600 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
