Gebruiksaanwijzing /service van het product UFD 540 van de fabrikant Kathrein
Ga naar pagina of 80
Operating manual DVB Caravan Receiver UFD 540 Order no.: 260 515.
2.
Preface 3 Preface Dear Customer, The following operating manual will help you obtain the best optimal use from the extensive features of your new satellite receiver. We have written this operating manual as comprehensibly as possible and as concise as necessary.
Content s 4 Contents Preface ........................................................................................................................ .......................................3 Contents ...................................................
Content s 5 AC3 ............................................................................................................................ ...................................... 31 Switching off sound ................................................
Content s 6 Data Transfer from Re ceiver to Receiver ........................................................................................ .............70 Prepara tion ................................................................................
Safety Instructions 7 Safety Instructions.
Control Element s, Displays and Connections 8 Control Elements, Displays and Connections This section contains a brief descr iption of all the control elements, displays and connections. The key symbols presented here are also used when describing operating sequences.
Control Element s, Displays and Connections 9 A / B M F L O K T V Remote control handset buttons Switch over of the remote control Calls up the last 4 programmes / favour- ite categories C.
Command of Remote Control 10 Command of Remote Control The remote control features 2 command sets, making it possible to operate 2 receivers independently of eac h other in one room (not in conjunction with a twin receiver). Note For this purpose, program one receiver on the command set 1 and the second receiver on the command set 2.
Operating Instructions 11 Operating Instructions Menu concept The menu concept is set up in a logical operating sequence. The current selected programme always appears in the upper right- hand corner of the screen.
Operating Instructions 12 is a switch-on button with menu functions. Press to exit setting. In function channel list: Locks the pro- gramme is a switch-on button with menu functions. Press the button again to exit. In function channel list: Makes a channel a favourite channel.
Operating Instructions 13 Alphanumeric assignments of number buttons on the remote control Button 1 x 2 x 3 x 4 x 5x 1 . , ? 1 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L .
Connection and S t art-up 14 Connection and Start-up The following section is specifica lly intended for the specialist dealer. You only need to read this section, if you are carrying out the installa- tion yourself. You will find sample configurations in the section "Connection exam- ple".
Connection and S t art-up 15 LNB supply voltage If the feed system (LNB) is power ed by an external supply voltage and the LNB supply voltage is not used for switching polarity, the LNB supply of the receiver must be set to "OFF" (see section "Installation menu, LNB configuration").
First T ime Inst allation 16 First Time Installation The first steps Connect the receiver to the mains power supply. Switch on the receiver by pressing the power button on the front of the unit. The display, " - - - -,“ appears in the LED display.
On Screen Displays / OSD 17 On Screen Displays / OSD Important screen displays The receiver functions are contro lled by a microprocessor and an ex- tensive software. The following ex planations are intended to improve your understanding of all procedures and to minimise the risk of mis- takes.
On Screen Displays / OSD 18 With the or button, exit the help function and return to the main menu. Press the button again and return to the originally received programme. TV channel identifier The channel identifier is displayed for several seconds every time the channel is changed or by pressing the button.
On Screen Displays / OSD 19 Channel List – Radio/TV Press the button to access the channel list. A + for the main channel list is indicated at the top left. Information about the channel, programme provi der, and whether the programme is normally encrypted is found under neath.
V ideotext 20 Videotext This symbol in the programme display indicates, whether teletext is transmitted with the called up programme By pressing the 0 button, the receiver prepares the teletext –also for scrambled signals- for the television set. The following display appears for a short time.
Programme Selection 21 Programme Selection This section describes how you select TV programmes with your re- ceiver and how you can set the desired volume. In this description of the functions, it is assumed that the receiver has been connected correctly.
Programme Selection 22 A further option for selecting a different programme is to press the button. The TV channel list is now displayed. The upper right- hand column provides information relating to the received satellites, the transponder and its transmission fr equency, polarisation, the sym- bol rate and the scrambling.
Programme Selection 23 Selecting a TV programme by number entry You can select a different TV programme during a running TV pro- gramme by entering the programme location number. Use the num- ber buttons to to enter in the programme positions.
Programme Selection 24 button. The radio channel list is now displayed. The upper right- hand column provides information relating to the received satellites, its transmission frequency, the polarisati on, the symbol, rate, the bouquet and the scrambling.
Common Interface 25 Common Interface Observe the operating manual of y our Pay-TV provider. The Common Interface for the insertion of two so-called Conditional Access Modules is located underneath the front flap.
Common Interface 26 However, a CA module must be available. You can find which card is located in the Common Access Module via the main menu and the menu „Common Interface.
Common Interface 27 Alw ays pay attention to the instructions from your Pay -TV pro- vide r! Here, select the submenu “Common Interface” with the but- tons and confirm selection by pressing .
T imer Settings 28 Timer Settings You can use the timer for recording a programme on time with a video recorder. 14 timers are available which you can be set to different programmes as well as start and end times.
T imer Settings 29 Confirm the settings by pressing or three times. If you hav e pre-programmed a dow nload per timer, all follow ing timer settings w ill be ignored after a successful dow nload! VPS signal Make certain, that no VPS signal is included in the digital television signal.
Sound Settings 30 Sound Settings Volume setting Set the required volume level by pressing the buttons on the re- mote control of the receiver. A bar indicator is displayed on the screen to show the set volume.
Sound Settings 31 AC3 The receiver has an audio output for the AC3 format (Dolby Digital) providing you with the opportunity of listening to cinema sound quality in your living room. Only connect the digital output with a correspond- ing system. Please refer to the instruction manual of your Dolby Digital sys- tem.
Channel list 32 Channel list The programme/channel settings set at the factory can be changed in the menu, “Channel list." Acce ss the menu by pressing the but- ton, the buttons as well as for TV or radio and confirm selection with .
Channel list 33 With the and buttons select the desired programme, which will be highlighted with a coloured bar. The bar can be shifted page-by-page or line-by-line with the cursor buttons. You can also enter the desired programme number with the numerical buttons.
Channel list 34 Press the button to access the channel list, and with the but- ton you can access the favourite list. Use the buttons to select a favourite programme. It is then highlighted by a coloured bar. Press the button to activate the writing mode.
Channel list 35 After finishing the letter ent ry, confirm it by pressing . You return to the channel list. Press to return to the television screen. Your changes are saved and confirmed, and an info display of the current received programme appears for a few second on the screen.
Channel list 36 With the buttons, select your desired programme, which is highlighted with a coloured bar and displayed in the upper right-hand corner of the screen.
Channel list 37 buttons, select "all satellites." Press and return to the cur- rent channel list. Search programmes alphabetically Receive an overview of programmes with the same initials in a list. With this, it is possible to quickly find a certain programme from the entire channel list.
Channel list 38 phabet" bar. Press to confirm the selected letters and a list of all the pro- grammes appears, which begin with the selected letters. With the buttons, you can now choose the desired channel, which is then highlighted with a coloured bar.
Channel list 39 Be careful w hen delet- ing programmes! With the button, you "hold" the programme which is to be moved, It will be highlighted with a different coloured bar. You can now move it to the desired position using the and the buttons.
Channel list 40 Manually adding programmes Basically, follow the same procedure for sorting in order to add a channel. With main menu button , access the channel list. By pressing the button, the menu for adding a programme ap- pears on the screen.
Channel list 41 By pressing , you return to the channel list. The saving of the change is confirmed and the info display of the current set programme appears for a few second on the screen.
Adding and Removing Satellites 42 Adding and Remov ing Satellites Setting up satellites Naturally, the LNB can also accommodate new satellites. In order to do so, the orbit position, which you need to take a bearing on, must be known. The “Antenna setti ngs“ menu entry in the installa- tion menu can be used as an aid for aligning the antenna.
Adding and Removing Satellites 43 After pressing the or button, you are asked if you want to add the satellites. Confirm it with . The following message appears You can now make the respec.
Programme Overview 44 Programme Overv iew EPG With the EPG button , you receive an overview of the programmes currently received from the trans ponder with time and duration (see on-screen display), provided that t hey are broadcast with electronic programme guide (EPG), for example, with ARD and ZDF.
Programme Overview 45 With the EPG button and , you receive the programme over- view of the currently received br oadcaster with time and duration (see on-screen display), provided that t hey broadcast the electronic pro- gramme guide (EPG). The length of the channel list depends on each programme provider and can cover several days.
Programme Overview 46 Confirm the selection with . The confirmation appears for a few seconds. The programme will be recorded at the set time. Press two times to leave this position without a timer setting.
Password 47 Password You can prevent your satellite re ceiver to be used by unauthorised persons by means of a password. With this password, you can en- sure your reception settings are not changed by others. At the same time, you can activate the parental control function to lock out various programmes.
Password 48 Carry out the following settings in this on-screen display: Age limit: This setting is only effective, if the corresponding lock-out signals are sent together with the transmission. Lock list: Yes/No. With this option you can lock or unlock the editing function for channel lists.
Password 49 Parental lock You can set the parental lock in a manner similar to that used for marking favourite programmes with the "Apple" symbol. This denies children access to unsuitable progra mmes. The "Padlock" symbol is used to identify the programmes in the "TV" or "radio" channel lists.
Password 50 After calling up the locked programme with the number keys, the mes- sage, "This programme is locked" appears and the programme can not be seen. After pressing and calling up a locked programme over the chan- nel list, you will be asked to enter in your password in order to watch the locked programme.
Operation from Front Panel 51 Operation from Front Panel If you have misplaced the remote control or the batteries are empty, you can still operate you receiver from the front panel. Backup operation On the front panel, there are 3 buttons at your disposal.
Setting System Parameters 52 Setting System Parameters The following settings should not be altered without good reason, since they are factory settings or operational settings, matched spe- cifically to your receiving syst em. Only extensions to the receiving sy stems or modifications call for new settings.
Setting System Parameters 53 System parameters Select the menu „System parameters“ with the menu button, the buttons in the main menu and .
Setting System Parameters 54 Local time/Timer The receiver displays the UTC time transmitted with the data stream (United Time Coordinate, former Greenwich Mean Time). Therefore, in Germany, the time must be corrected by +1 hour. If necessary, the summer time must be corrected, in order for the tim- ers to turn on and off at correct times.
Setting System Parameters 55 /synchronising-signal) • RGB – red-/green-/blue-signal • Y/C – S-VHS signal (luminance/chrominance). Confirm by pressing two times.
Setting System Parameters 56 The satellite transmission frequencies are within the following ranges: 10.7…11.7 GHz Low-band ( Low-band / analogue transmission) 11.
Setting System Parameters 57 Different control signals are requir ed for the purpose of selecting the satellite signals. To date, the LNB supply voltages 14/18 V and the 22 kHz signal (superimposed on the LNB supply voltage) have been suf- ficient for signal selection in the ma jority of applications.
Setting System Parameters 58 Antenna settings This menu is intended solely for se rvice purposes and, if need be, i.e. if no measuring instrument is available, it can be used to align the an- tenna (satellite dish). The satellite can be defined in the first line and the transponder in the second.
Setting System Parameters 59 Satellite search The receiver allows you to search for programmes on a satellite in the menu ‘Satellite search.’ With the buttons, move to the menu line.
Setting System Parameters 60 All programmes are added to the existing channel list and highlighted with a different colour You can cancel the search by pressing the button. TP set-up/search In this menu, you can scan thr ough the transponders for specific pro- grammes, e.
Setting System Parameters 61 Transponder selection The following settings are now possible (select positions with ): • desired satellite with or , • the transponder frequency with .
Setting System Parameters 62 Exit this menu by pressing and skip to the previously highlighted programme. With the button, return to this menu once more to search for fur- ther transponders. After an unsuccessful search, the following message appears: All new programmes are added to the existing channel list.
Setting System Parameters 63 DiSEqC [UFO] Set-up You should only make changes in this menu, when the receiver is connected to another receiving system with different features or if changes have been made to the receiving system. Pay close attention to the instructi ons of your Sat IF system.
Setting System Parameters 64 Tone burst Under this menu point, the 22 kHz signal can be set as follows: Switching statuses of setting: Switching statuses of setting: Switching statuses of setting: 22-kHz signal —> High/Low and Tone Burst —> Pos.
Setting System Parameters 65 receiver to the receiving system fo r signal selection, are also recog- nised by this system. A remote frequency must not be set in this operating mode, because it is defined by the UFO micro system as part of the addressing pro- cedure.
Automatic Antenna Alignment with HDP 170 66 Automatic A ntenna A lignment w ith HDP 170 If the automatic positioner HDP 170 is installed in your mobile home or caravan, it can be aligned via the main menu „Automatic antenna HDP.“ Also, refer to the operating manual of the HDP 170.
Sof tware and Channel list Up date 67 Software and Channel list Update Thanks to digital technology, the software and channel list of your re- ceiver can also be updated via satellite. Find out if a new software or channel list is available under t he submenu software download.
Sof tware and Channel list Up date 68 The light cursor bar in "Software download" can be moved with the buttons. Press in the menu item "Display info" to re- ceive information about the transmitted software and channel list.
Sof tware and Channel list Up date 69 turns to operation. If an error or incorrect signal occurs, a message appears " Dow nload error ." Never switch the receiver off dur ing the update procedure, or the en- tire software will be lost.
Dat a T ransfer from Receiver to Receiver 70 Data Transfer from Receiver to Receiv er Your receiver is able to receiv e the RS232C socket data from another receiver. Here, both receivers must be connected via a so-called 'zero modem cable.' The transmitting re ceiver is in this case the mas- ter and the receiving receiver is the slave.
T echnical Annex 71 Technical Annex Technical features The receiver UFD 540 is equipped with the following features: Reception of all DVB radio and TV programmes (Free to Air Receiver) Common Interfac.
T echnical Annex 72 Technical data RF features Sat-IF frequency range 950 to 2150 MHz Input level range 43 to 83 dBµV IF frequency 479.5 MHz Receiving threshold (Eb/No dig.
T echnical Annex 73 Accessories 1 Infrared remote control 2 Batteries 1.5 V, type: LR 03, size: AAA (Micro) 1 SCART cable 1 operating manual Scart socket assignments Signal Connection no.
Connection example 74 Connection example TV Cinch L + R Sc a r t Sat -IF R Connection of a DVR-S receiver on a TV set and a Hi-fi system for re- ception of digital Sat TV and radio programmes. For connection, one Scart cable and a Cinch cable are required.
Short T echnical Lexicon 75 Short Technical Lexicon DiSEqC DiSEqC (Digital Satellite Equipment Control) is a communication sys- tem between the Sat receiver (master) and the peripheral Sat compo- nents (slaves), such as LNBs, multi-switch, motorised antenna sys- tems.
Short T echnical Lexicon 76 The symbol rate is measured in MSymbols/s and is equal to the num- ber of symbols that are received per second. Transponder A transponder is a satellite transmitte r which transmits TV and radio signals. A satellite has several transponders.
Short T echnical Lexicon 77 Glossary Audio output Receiver sound output AV channel slot Preferential channel location of TV set for SCART input Decoder Decoder Unscrambling unit for pay-TV DiSEqC Cont.
Service 78 OSD-Language Picture format LNB supply German 4:3 Operation: Standby: O N 16:9 O F F Satellite 1 Satellite 2 Satellite 3 Satellite: Satellite: Satellite: LO1: 9750 LO1: 9750 LO1: 9750 LO2: 10600 LO1: 10600 LO1: 10600 Satellite Satellite Satellite DiSEqC menu 22-kHz: High/low PosA/B OFF Tone burst: High/low PosA/B Opt.
79.
internet: htt p://www.kathrein. de KATHR EIN-Werke KG Telefon (0 80 31) 18 40 Fax (0 80 31) 18 43 06 Anton-Kat hrei n-Straße 1-3 Postfach 10 04 44 D-83004 Ros enheim 9362588 / A/ 0505.
Een belangrijk punt na aankoop van elk apparaat Kathrein UFD 540 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kathrein UFD 540 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kathrein UFD 540 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kathrein UFD 540 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kathrein UFD 540 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kathrein UFD 540 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kathrein UFD 540 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kathrein UFD 540 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.