Gebruiksaanwijzing /service van het product 790.4107 van de fabrikant Kenmore
Ga naar pagina of 40
Use & Care Guide Manual de Uso y Cuidado English / EspaKol Models/Modelos: 790.4107 _ I<e Elite ® @ !llllllllllllllllllli 5 :d _ o _ n _ct r:c e_ n g E 6ctrica DeslizaD,e '!'_ ::::::: Color numbe_% nOmero de color P/N 318205820A (1009) Sears Brands Management Corporation Hoffman Estates, IL 60179 U.
Table of Contents Kenmore Elite Warranty ............................................................. 2 Product Record ............................................................................. 2 Serial Hate Location ..............................
iMPORTANT SAFETY iNSTRUCTiONS Read all instructions before using this appliance. This manual contains important safety symbols and instructions. Please pay attention to these s' 'mbols and follow all instructions iven. * Remove all tape and packaging before using the appliance.
iMPORTANT SAFETY iNSTRUCTiONS * Wear Proper Apparel. Loose-fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces. Never use your appliance for warming or heating the room.
iMPORTANT SAFETY iNSTRUCTiONS • Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the appliance or shut off the power to the appliance before removing and replacing the bulb. * Protective liners--DO NOT USE ALUMINUM FOiL TO LiNE THE OVEN BOTTOM.
Features at a Glance Your Range includes: 1. Electronic oven control with kitchen timer. 2. Left front element control and electronic display. 3. Left rear element control and electronic display. 4. Warmer drawer control and electronic display. 5. Center rear element control and electronic display.
Before Setting Oven Controls Oven Vent Location The oven is vented through its upper front frame. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent.
Surface Cookware Recommendations Selecting Surface Cooking Cookware Cookware should hove flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1).
Before Setting Surface Controls About the Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Turbo Boil Surface Element The Turbo Boil feature offers a higher wattage surface radiant element.
Before Setting Surface Controls Cooktop Display Windows The cooktop controls provide a digital display for each of the radiant surface elements located on the cooktop. Power levels and messages are easily monitored and adjusted using the corresponding control keypads in combination with the window dlsplays.
Setting Surface Controls Single Radiant Element The cool<top provides single radiant element located as illustrated. Use the following instructions when operating these elements. The suggested power level settings shown in Fig. 1 are based 3. on cooking with medium sized aluminum pans with lids.
Setting Surface Controls Expandable Radiant Element The cooktop provides expandable radiant elements located as illustrated. Use the following instructions when operating these elements. Use the ELEMENT SiZE keypad (Fig. 1) to select which portions of the expandable element are needed for heating.
Oven Control Functions For satisfactory use of your oven, become familiar with the various features and functions of the oven. ® Timer Set/Off ® Delay Start ® Add 1 Minute ® Slow Cook ® Cook Time.
Getting Started Setting Clock at Power Up You will be prompted to enter the time of day in the event of a power failure or when you first provide electric power to your appliance. ° When your appliance is first powered up, 12:00 wiii flash in the display.
Setting Oven Controls Preheat For best baking performance use the Preheat feature. The Preheat feature wiii bring the oven up to the set cooking temperature. A reminder tone wiii sound indicating when the set temperature is reached and to place the food in the oven.
Setting Oven Controls Cook Time Adding a cool< duration when baking is beneficial when a recipe requires a specific temperature and period of time to cool<.
Setting Oven Controls Convection Bake Convection Bake uses a fan to circulate the oven heat evenly and continuously. The improved heat distribution allows for even cooking with excellent results. Multiple rack cooking may slightly increase cool< times for some foods_ but the overall result is time saved.
Setting Oven Controls Convection Convert The conv convert option allows you to convert any normal baking recipe using the convection bake feature. The control uses the normal recipe settings and adjusts to a lower temperature for convection baking. Conv convert must be used with Conv Bake feature.
Setting Oven Controls Convection Roast Convection roast combines a cool< cycle with the convection fan and element to rapidly roast meats and poultry. Heated air circulates around the meat from all sides, sealing in juices and flavors. Meats cooked with this feature are crispy brown on the outside while staying moist on the inside.
Setting Oven Controls Broil Use the broil feature to cook meats that require direct exposure to radiant heat for optimum browning results. The following temperature settings apply to the broil feature: ° Auto-suggest (default) setting: 550°F / 288°C * Min.
Setting Oven Controls Cakes Breads The Cakes Breads functions are designed to give optimum baking performance for Cakes or Breads. These functions work well for baking cakes, brownies, pies (fresh or frozen), baked custards, cheesecakes, breads, rolls, biscuits, muffins and cornbread.
Setting Oven Controls Meat Probe When cooking meat such as roasts, hams or poultry you can use the probe to check the internal temperature without any guesswork. For some foods, especially poultry and roasts, testing the internal temperature is the most effective way of insuring that your food has been properly cooked.
Setting Oven Controls Meat Probe (cant'd) To Set Meat Probe: 6. Set the oven control for Bake, Conv Bake or Conv Roast and the desired oven temperature. You may use the meat probe with some other baking features, but the meat probe cannot be set with Broil or Flex-Clean.
Setting Oven Controls Slow Cook The Slow Cook feature may be used to cook foods more slowly at lower oven temperatures. Slow Cook provides cooking results much the same way as a slow cooker or Crock-Pot. This feature is ideal for roasting beef, pork & poultry.
Setting Oven Controls Sabbath Mode This appliance provides special settings for use when observing the Jewish Sabbath/Holidays. This mode will turn off: all audible tones or visual display changes normally provided by the oven control. BAKE is the only cooking features available while in the Sabbath mode.
Warmer Drawer Warm & Ready TM Drawer The purpose of the warmer drawer is to keep hot cooked foods at serving temperatures. Examples are vegetables, gravies, meats, casseroles, biscuits, roils and pastries. It is not recommended to heat cold food in the warmer drawer; always start with hot food.
Warmer Drawer Proof Bread The warmer drawer has a Proof Bread feature that may be used to prepare bread dough. The recommended length of time to keep the bread dough in the warmer drawer is about 45-60 minutes. Be sure however to follow the recipe's recommended times.
User Preferences Setting Clock See the example below to set the clock to 1:30. 1. Press Q. 2. Enter 1:30 to advance to 1:30. 3. Press START to accept or press STOP to reject. Setting 12 or 24 Hour Mode The clock display mode allows you to choose between 12 and 24 hour mode.
Self-Cleaning Cycle Before Starting Self-Clean A self-cleaning oven cleans itself with high temperatures that are well above those used for normal cooking. The high cleaning temperature eliminates soils completely or reduces them to a fine powdered ash that you can later easily wipe away with a damp cloth.
Self-Cleaning Cycle Flex Clean Cycle The FLEX CLEAN pad controls the Self-Cleaning feature. When used with a the Delay Start pad, a delayed Self- Cleaning cycle may also be programmed. The Flex Clean feature allows for any Self-Cleaning cycle time from 2 (2:00) to 4 hours (4:00).
Care & Cleaning Before cleaning any part of the oven, be sure all controls are turned OFF and the oven is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE EXTENT AND DIFFICULTY OF MAJOR CLEANING LATER.
Care & Cleaning Cooktop Maintenance Consistent and proper cleaning iS essentlal to malntainlng your ceramic glass caoktop Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on the web visit www.
Care & Cleaning Cooktop Cleaning (cont'd) Do not use the followlng on the cookfop: ° Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads.
Care & Cleaning Removing and Replacing the Oven Door The oven door is heavy. Be careful when removing and lifting the door. Do not lift the oven door by the handle.
Care & Cleaning Removincj and Replacincj the Drawer To Remove the Drawer: 1. Open the drawer to the fully opened position. 2. Locate glide lever on each side of drawer_ pull up on the left glide lever and push down on the right glide lever (See Figure 1).
Before You Call (Solutions to Common Problems) Oven Baking For best cooking results, heat the oven before baking cookies° breads° cakes° pies or pastries° etc.
Before You Call (Solutions to Common Problems) Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Oven Control Beeps and Electronic control has detected a fault condition.
Before You Call (Solutions to Common Problems) Entire oven does not operate. When the oven is first plugged in, or when the power supply to the oven has been interrupted, the display will flash. The oven cannot be programmed until the clock is set. Be sure electrical cord is securely connected into the electrical junction box.
PROTECTION AGREEMENTS Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore®product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Your Home For troubleshooting, product manuals and expert advice: manag www.managemylife.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and coolin.
Een belangrijk punt na aankoop van elk apparaat Kenmore 790.4107 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenmore 790.4107 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenmore 790.4107 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenmore 790.4107 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenmore 790.4107 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenmore 790.4107 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenmore 790.4107 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenmore 790.4107 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
