Gebruiksaanwijzing /service van het product 790.9611 van de fabrikant Kenmore
Ga naar pagina of 28
® Electric ange Estufa el_ctrica Models, Modelos 790.9611", 9612", 9613", 9433", 9434* * = color number, n0mero de color i!i .....
Table of Contents Product Record Free-Standing Range Warranty ........................................... 2 Product Record ................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS .......................... 3-4 Protection Agreements .
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important Safety instructions iMPORTANT iNSTRUCTiONS FOR USINGYOUR COOKTOP , Knowwhich knob controls each surface heating unit. Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan. Use Proper Pan Size--This appliance is equipped with one or more surface units of different sizes.
Protection Agreements Acuerodes de protecci6n Master Protection Agreements Congratulations on making a smart purchase. You r new Kenmore c_ product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Range Features Your Electric Range Features Include: 1. Electronic Oven Control with Kitchen Timer. 2. Simmer Select Element Control (some models) or Single Radiant Element Control (some models) or Single Radiant Power Boil Control (some models). 3. Single Radiant Element Control.
Before Setting Oven Controls OVEN VENT Fig. 1 Oven with visible Bake Element - Fig. 2 Oven Vent Location The oven vent is located under the left side of the controJ panel (See Fig. 1). When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results.
Before Setting Oven Controls (cont'd) About the Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Be sure to match the pan size with the diameter of the element outline on the cooktop.
Setting Surface Controls To Operate Single Radiant Surface Elements (all models) To Operate a Single Radiant Element: 1. Place correctly sized cookware on the radiant surface element. 2. Push in and turn the surface control knob in either direction to the desired setting (See Fig.
Setting Surface Controls (cont'd) Single setting 6 Dual setting To Operate Dual Radiant Surface Element (some models) The right front control knob offers flexibilty for different sized cookware with the Dual Radiant surface element. The inner element alone can be used for smaller or both the inner and outer in combination for larger cookware.
Surface Cooking Using Power Element (some models) The "Power Element" feature uses a higher wattage surface radiant element which can bring food items to boil much quicker. The left front radiant element will be _ E [ clearly marked if this feature is available on your range (See Fig.
Oven Control Functions READ THE I NSTRU CTIONS CAREFULLY BEFORE U SING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below. COOK TIME PAD-- Used to enter the length of CLOCK SET the baking time.
Setting Oven Controls Y Q • ® 0 0 • ® £'_'8 _¸ S_i®c_ Note: The time Of day must first be set in order to operate the ovenl To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
Setting Oven Controls (cont'd) To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). To Set the Controls for Baking: 1. Press B,ke. " "appears in the display.
Setting Oven Controls (cont'd) To Set the Timed Bake and Delay Start Features The _ COOK TIME and _ DELAY START pads operate the features that will turn the oven ON and OFF at the times you select in advance.
Setting Oven Controls (cont'd) To Set for Broiling: , 2. 3. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below. Press B,o_ ,,__ "will appear in display. Press and hold the ,_ or V until the desired broil setting level appears in the display.
Setting Oven Controls (cont'd) To Operate the Oven Light The interior oven light will automatically turn ON when the oven door is opened. Press the Oven Light Switch located on the upper left control panel to turn the interior oven light ON and OFF whenever the oven door is closed.
Setting Warmer Drawer Controls (cont'd) Warmer Drawer Recommended Food Settings Table Food item Setting Bacon HI Hamburger Patties HI Poultry HI Pork Chops HI Fried Foods HI Pizza HI Gravies MED .
Self-Cleaning During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance. The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle of any range.
Self-Cleaning (cont'd) Starting the Select Self=Clean Cycle or a Delayed Start Self=Clean Cycle For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for heavy soiJs.
General Care & Cleaning Cleaning Table Surfaces How to Clean Aluminum (Trim Pieces) & Vinyl Use hot, soapy water and a cloth. Dry with a clean cloth. Painted and Plastic Control Knobs, Body Parts, and Decorative Trim Forgeneral cleaning, use hot, soapy water and a cloth.
General Care & Cleaning (cont'd) Cooktop Cleaning and Maintenance Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on the web visit www.
General Care & Cleaning Cleaning Recommendations for Ceramic Glass Cooktops (cont'd) Door Hinge locations with oven door fully open Do not use the following on the ceramic glass cooktop: • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads.
General Care & Cleani Changing the Oven Light Oven Light. Wire Holder ng The oven light automatically turns ON when the door is opened. The oven light may also be manually operated by pressing the.
Before You Call Solutions to Common Problems Before you earl for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE Range is not level.
Before You Call Solutions to Common Problems Oven light does not work. Replace or tighten bulb. See Changing Oven Light section in this Use & Care Guide. Oven smokes excessively during broiling. Control(s) not set properly. Follow instructions under Setting Oven Controls.
Notes 27.
iiiiiiiiiiiiii_ ¸ iiiiiiiiiiiiii_' iiiiiiiiiiiiiD iiiiiiiiiiiiii _, iiiiiiiiiiiiii_, iiiiiiiiiiiiii_' iiiiiiiiiiiiii_' iiiiiiiiiiiiiD iiiiiiiiiiiiii _, iiiiiiiiiiiiii_, iiiiiiiiiiiiii_.
Een belangrijk punt na aankoop van elk apparaat Kenmore 790.9611 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenmore 790.9611 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenmore 790.9611 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenmore 790.9611 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenmore 790.9611 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenmore 790.9611 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenmore 790.9611 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenmore 790.9611 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
