Gebruiksaanwijzing /service van het product CD-206 van de fabrikant Kenwood
Ga naar pagina of 28
INSTRUCTION MANUAL KENWOOD CORPORA TION B60-3684-00 CH ( K,P,Y, M ,X ,T ) I D 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1 This instruction manual is used for six models. Model availability and features (functions) may differ depending on the country and sales area.
CD-206/204/203/DPF-R6010/R4010/R3010 (En ) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada .........................................................
3 CD-206/204/203/DPF-R6010/R4010/R3010 (En ) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
CD-206/204/203/DPF-R6010/R4010/R3010 (En ) 4 L R CD SYSTEM CONTROL AC110-220V AC220-240V L R VARI ABLE LINE OUTPUT @ DIGITAL OUTPUT SYSTEM CONTROL OPTICAL COAXIAL SL16 XS 8 ƒ TEXT OPTICAL COAXIAL L R.
5 CD-206/204/203/DPF-R6010/R4010/R3010 (En ) OT UU PT 1 -d 2B The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT and PHONES jacks of the unit. Connect a stereo headphone to the PHONES jack of the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 6 DIGITAL AUDIO COMPACT MULTIPLE CD PLAYER DPF-R6010 D.R.I.V.E. TEXT TEXT DISP. ALL INFO. TIME DISP. REPEAT RANDOM P.
7 CD-206/204/203/DPF-R6010/R4010/R3010 (En) The keys with the same name as those on the remote control unit operate the same way as the remote control unit. 1 ON/STANDBY (POWER / ) switch 9 Turns the unit ON/STANDBY. 2 P.MODE key $ 3 TEXT DISP. key (CD-206/DPF-R6010 only) # Used to select the CD-TEXT information display.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 8 Operation of remote control unit (Except for CD-203/DPF-R3010) 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
9 CD-206/204/203/DPF-R6010/R4010/R3010 (En) REMOTE CONTROL UNIT RC-P0601 I DC SR A EI D G N 1 D: C DE T T X « 1 Preparing to Play T racks Load/unload a disc. Close the tray. ALL TEXT SEARCH (CD-206/DPF-R6010 only) For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 10 SINGLE TOTAL 10 9 8 7 6 5 4 3 2 1 REPEAT TRACK NO. DISC NO. 5 4 3 2 1 01 2 18 : 1 Check that the unit is in the normal play TRACK mode.
11 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Skipping tracks Playback from desired track 2 Select the desired track No. 1 Select the disc. ÷ The track in the direction of the pressed key is skipped, and the selected track will be played from the beginning.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 12 01 C A 01 L M N O P Q ... BCDEFGHIJKL MNOPQ. . . TT IE LX Z Y 2 0: 13 2 1 D0 1I TL TE B AC In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. ÷ Load a disc (CD-TEXT support) in the CD player.
13 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Displays (CD-206/DPF-R6010 only) ÷ When there is no text information to be displayed “– – – – –” is scrolled on the display. ÷ In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will appear for approx.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 14 G P0 M1 1 DT O N2 .5 G P0 M1 1 DT O N2 .5 « G P0 M1 B AD CF EH G Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) ÷ Load a disc in the CD player.
15 CD-206/204/203/DPF-R6010/R4010/R3010 (En) D G P0 M1 5TO N2 .5 T o check or change the programmed tracks 1 Press the CHECK key. Press until the track No. to be changed is displayed. 2 Select the disc. 3 Select the new track No. 4 Set the entry. T o add a track to the program 1 Select the disc.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 16 Press to clear tracks from the end. T o clear tracks from the program To clear all tracks ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
17 CD-206/204/203/DPF-R6010/R4010/R3010 (En) < <> < E <2 1> > <> > N RM D0 0 5 « Playback in a random order (Random playback) ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 18 1 Press so that the “PGM” indicator lights. Repeated playback T o repeat only the programmed tracks : Keys and controls used in the operations described on this page. ™ Preparation ÷ Load a disc in the CD player.
19 CD-206/204/203/DPF-R6010/R4010/R3010 (En) T o repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. 1 Press so that the “PGM” indicator goes off. 2 Press the REPEAT key. For the CD-206/DPF-R6010 The current status is displayed when the key is pressed once.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 20 Blinks. CD-206/DPF-R6010 D ET ID S I? C The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation 1 Light the “EDIT” indicator.
21 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Editing Light up. 1 Press so that the "MULTI EDIT " indicator light. : Keys and controls used in the operations described on this page. Enter the recording time of the tape. ) 2 Do this operation in the stop mode.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 22 ÷ The edited data is cleared entirely. T o clear the edited contents T o check the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.
23 CD-206/204/203/DPF-R6010/R4010/R3010 (En) T imer operations Timer playback of CD can be started at any time using an audio timer which is available in audio stores. 1 Turn the powers of the associated components ON. 2 Preparation Load a disc in the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 24 Never play a cracked or warped disc. Cleaning If fingerprints or foreign matter be- come attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner.
25 CD-206/204/203/DPF-R6010/R4010/R3010 (En) ÷ Power plug is loosely connected. ÷ With the power plug connected to the switched AC outlet of an amplifier, the power of the amplifier is turned off. ÷ Disc is loaded upside down. ÷ Disc is loose. ÷ Disc is dirty.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 26 Specifications CD-206/DPF-R6010 [ Format ] System .......................... Compact disc digital audio system Laser ...................................................... Semiconductor laser [ D/A Convertors ] D/A Conversion .
27 CD-206/204/203/DPF-R6010/R4010/R3010 (En).
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 28 For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Een belangrijk punt na aankoop van elk apparaat Kenwood CD-206 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood CD-206 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood CD-206 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood CD-206 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood CD-206 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood CD-206 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood CD-206 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood CD-206 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
