Gebruiksaanwijzing /service van het product DM-9090 van de fabrikant Kenwood
Ga naar pagina of 56
MINIDISC RECORDER INSTRUCTION MANUAL DM-9090 B60-3491-00 JA (T) MC 98/12 1 1 10 9 8 7 6 5 4 3 2 1 97/12 1 1 10 9 8 7.
DM-9090 (En) 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Introduction Before applying power The marking is located on the rear panel and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class.
DM-9090 (En) 3 Introduction ................................................................................................................... ....................... 2 Before applying power ...........................................................
DM-9090 (En) 4 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
DM-9090 (En) 5 IMPORT ANT SAFEGUARDS Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference.
DM-9090 (En) 6 1 3 . Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.
DM-9090 (En) 7 Safety Precautions Do not touch the disc directly. Do not touch the disc by opening the shutter with your hand. The cartridge will be damaged if it is forced open. Handling of Mini Disc As the Mini Disc is accommodated inside a cartridge, it can be handled without caring about dust or fingerprint.
DM-9090 (En) 8 Beware of condensation When water vapor comes into contact with the surface of cold material, water drops are produced. If condensation occurs, correct operation may not be possible, or the unit may not function correctly. This is not a malfunction, however, the unit should be dried.
DM-9090 (En) 9 MD system The Mini Disc system has the features as summarized in the following. 1 Like CD (Compact Disc), playback can be started from any position. (Random access) 2 It uses a disc with a diameter of 64 mm that is accommodated in a cartridge.
DM-9090 (En) 10 R L SYSTEM CONTROL PLAY OUT OPT. COAX. REC IN 3 COAX. 1 COAX. 2 OPT. D I G I T A L L I N E PLAY OUT REC I N R L SYSTEM CONTROL SYSTEM CONTROL DIGITAL OUTPUT L R IN OUT PLAY MD/DAT REC DIGITAL AUDIO DIGITAL AUDIO COMPACT COMPACT PHONES OPTICAL COAXIICAL REC IN 3 COAX.
DM-9090 (En) 11 About the system control connections Connecting system control cords after connecting a Kenwood audio component system lets you take advantage of convenient system control operations. There are two Kenwoood system control modes. Make connections according to the groups of terminal symbols shown below.
DM-9090 (En) 12 EDIT/ SPACE FADE/ DELETE INPUT MONITOR REC INPUT STEREO MINIDISC RECORDER DM-9090 TIMER POWER PHONES - O N – OFF LEVEL MIN MAX OFF PLAY REC SEARCH TITLE DISC LOADING MECHANISM High bit Rec. & Play D.R.I.V.E. 20bit Rec. D.R.I.V.E.
DM-9090 (En) 13 1 POWER key : Press to turn the unit ON and OFF. : The unit may enter the standby mode when the POWER key is pressed to turn it ON. This is because the unit holds the memory that it has been put to the standby mode by the remote control unit in the last operation.
DM-9090 (En) 14 1 Numeric keys / Character editing keys Numeric keys 0-9 : : Press when selecting a track number directly. +10 : : Press when selecting a track number 10 or more. +100 : : Press when selecting a track number 100 or more. : These keys are also used to select a character or symbol during title editing.
DM-9090 (En) 15 Operation of remote control unit 1 Remove the cover. Insert batteries. 23 Close the cover. ÷ Insert two R6 (“AA”-size) batteries following the polarity indications.
DM-9090 (En) 16 1 2 3 Use the following procedure to play a MD in the original order of tracks from track No. 1. Playback of Mini Disc Before playing a MD Load a Mini Disc. Turn the power ON. Start playback. ÷ In a few seconds, playback starts from track No, 1.
DM-9090 (En) 17 1 2 3 Pressing the TITLE SEARCH key again cancels the current track number. Pressing the TITLE SEARCH key again cancels the track number selection mode. Preparation To smaller track No. To larger track No. Start playback. Select the desired title.
DM-9090 (En) 18 1 1 2 Press the RANDOM key. Random playback Each press switches the mode. 1 Track mode : PGM goes off 2 Program mode : PGM lights up Each press switches the mode. 1 Track mode : PGM goes off 2 Program mode : PGM lights up “PGM” goes off ÷ Random playback is not possible in the program mode.
DM-9090 (En) 19 ÷ The track in the direction of the pressed button is skipped, and the selected track will be played from the beginning. ÷ When the 4 key is pressed once during playback, the track being played will be played from the beginning.
DM-9090 (En) 20 1 Initiate the program mode. 2 3 1 Load a disc. 2 Put the MD recorder in stop mode. Programming Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Preparation Select track numbers in the order you want to play them.
DM-9090 (En) 21 ÷ When a track No. is entered, the track will be added to the end of the existing program. ÷ The input operation is aborted if the CHARA. / P.MODE key is not pressed while the indicator is blinking. ÷ The entire program is cleared. ÷ Each press displays the next track in the program.
DM-9090 (En) 22 1 Enter the track mode. 2 Enter the repeat mode. 3 Start playback. The programmed tracks can be played repeatedly. Put the MD recorder in stop mode. “REPEAT” lights up ÷ All of the programmed tracks will be repeated. ÷ In case only one track is programmed, only that track will be repeated.
DM-9090 (En) 23 Recording-related keys AUTO/MANUAL key This key is used to select whether track numbers are to be marked automatically during recording or they are to be marked manually during or after recording. The track num- bers can be used to locate the beginning of a track during playback or programming tracks.
DM-9090 (En) 24 Each press switches the mode. 1 REC MODE : off 2 REC MODE : on ( “D.REC LEVEL?” displayed.) 1 Switch the REC MODE on. 2 Select the setting adjustment mode. 3 Set the selection (by pressing the JOG DIAL). 4 Adjust the setting value.
DM-9090 (En) 25 When “D.REC LEVEL?” is selected (Valid during digital recording) When “AUTO TIME?” is displayed (Valid during analog recording) When “AUTO LEVEL?” is displayed (Valid during analog recording) When “F ADE TIME?” is displayed (Valid during digital recording) Pressing the SET key while “D.
DM-9090 (En) 26 Adjust the settings if required. 1 2 1 Switch the REC MODE on. 2 Select the setting adjustment mode. 3 Set the selection (by pressing the JOG DIAL). Go to step 2 if setting adjustments are not required. The input jacks connected with audio cords accept analog signals.
DM-9090 (En) 27 Each press switches the mode. 1 goes off (AUTO) : Track numbers are marked automatically. £ 2 MANUAL : Track numbers can be marked as desired. £ 3 4 ÷ The unit enters record-pause mode automatically when the ¶ key is pressed. 6 5 1 Play the source to be recorded.
DM-9090 (En) 28 1 Go to step 2 if setting adjustments are not required. To fade in and fade out the music. 2 3 4 1 Switch the REC MODE on. 2 Select the setting adjustment mode. 3 Set the selection (by pressing the JOG DIAL). Adjust the settings if required.
DM-9090 (En) 29 6 Adjust the digital source recording level. 1 Play the source to be recorded. 2 Press the ¶ key. 3 Adjust the recording level. 5 ÷ The unit enters record-pause mode automatically when the ¶ key is pressed. 8 7 Recording is not possible if the following characters are displayed.
DM-9090 (En) 30 The fade mode of the unit is switched on/off every time the FADE key is pressed. Recording with fade-in: When recording is initiated during stop (or pause) in the fade mode, recording starts from ATT = - ` , increases to the previously set recording level and continues at this level.
DM-9090 (En) 31 Editing Erasing desired tracks (QUICK ERASE) Some functions are limited due to the restrictions im- posed by the MD standard. Before considering the symp- toms as a sign of trouble with the unit, please read “Symptoms related to MD standard”.
DM-9090 (En) 32 Editing The modes are switched by rotating the JOG DIAL. 1 DIVIDE? : Dividing a track 2 COMBINE? : Combining tracks 3 ERASE? : Erasing track(s) 4 MOVE? : Moving (reordering) tracks 1 Select the move destination (the new track number to be assigned to the track being played).
DM-9090 (En) 33 Editing 3 ÷ It takes a while until the execution completes. ÷ If you execute an editing operation by mistake, the condition before editing can be recovered by performing the “EDIT CANCEL” opera- tion. ‹ Execute the track reordering operation.
DM-9090 (En) 34 Editing Select “Q.MOVE”. 1 Select “Q.MOVE”. 2 Set the selection (by pressing the JOG DIAL). The modes are switched by rotating the JOG DIAL. 1 Q. MOVE? : Moving (reordering) tracks 2 Q.ERASE? : Erasing track(s) ÷ Press the EDIT/SPACE key again to abort the editing operation.
DM-9090 (En) 35 Editing 1 Select the move destination track num- ber. 2 Set the movement destination (by press- ing the JOG DIAL). Select the move destination. Display when tracks are moved at the end of all tracks To increase track No. To decrease track No.
DM-9090 (En) 36 Editing Dividing the track being played (TRACK DIVIDE) The modes are switched by rotating the JOG DIAL. 1 DIVIDE? : Dividing a track 2 COMBINE? : Combining tracks 3 ERASE? : Erasing track(s) 4 MOVE? : Moving (reordering) tracks Use the following procedure to divide a track into two by inserting a track number in its middle.
DM-9090 (En) 37 Editing ÷ It takes a while until the execution completes. ÷ The track is divided into two tracks. ÷ The unit enters pause mode at the second track. ÷ There is no blank space left between the two tracks. ÷ Track division may sometimes be impossible due to the limitations of the MD standard.
DM-9090 (En) 38 Editing To combine the current track with the next track. The modes are switched by rotating the JOG DIAL. When pressed in play mode: 1 DIVIDE? : Dividing a track 2 COMBINE? : Combining tracks 3 ERASE? : Erasing track(s) 4 MOVE? : Moving (reordering) tracks Next track 1 Play one of the MD tracks to be com- bined.
DM-9090 (En) 39 Editing ÷ It takes a while until the execution completes. ÷ If editing has been started during playback, playback restarts automati- cally from the current track. ÷ Track combining may sometimes be impossible due to the limitations of the MD standard.
DM-9090 (En) 40 Editing 1 Play a MD. 2 Press the EDIT/SPACE key to switch the editing mode on. Confirm that the track has been erased. Use the following procedure to erase a single track being played. Be careful in using this operation because a track cannot be recovered once it has been erased.
DM-9090 (En) 41 Editing Eject the Mini Disc. Information is being written. Mini Disc has been ejected. While “WRITING” is displayed, do not apply shock or vibration to the unit because information is being written on the Mini Disc. Track Nos. are adjusted.
DM-9090 (En) 42 Editing Use the following procedure to erase desired tracks in stop mode. Be careful in using this operation because tracks cannot be recovered once they have been erased. 1 To erase all MD tracks. 1 Select “Q.ERASE”. 2 Set the selection (by pressing the JOG DIAL).
DM-9090 (En) 43 Editing End the selection of the tracks to be erased. 3 Image of track deleting (QUICK ERASE) While “WRITING” is displayed, do not apply shock or vibration to the unit because information is being written on the Mini Disc. Execute the track erasure operation.
DM-9090 (En) 44 Editing 1 Select the item to be edited. The modes are switched by rotating the JOG DIAL. 1 DISC : Disc title 2 001 : Track title 3 PRE 1-PRE 9 : Preset title 4 ALL ERASE? : Erasing bot.
DM-9090 (En) 45 Editing 2 The characters can be switched by rotating the JOG knob. 1 A to Z and space (a blank character): 2 a to z and space: 3 0 to 9, symbols, preset titles (x 9): One of the following character groups can be selected.
DM-9090 (En) 46 Editing To change or erase a title. 3 One of the following character groups can be selected. 1 A to Z and space (a blank character): 2 a to z and space: 3 0 to 9, symbols, preset title.
DM-9090 (En) 47 Editing CHARA. key: Press to switch the character groups on the character display. Manual search ( 1 , ¡ ) keys: Press to move the cursor during title input operation. When the cursor is (lower half only) : The input character is inserted before the character in the cursor position.
DM-9090 (En) 48 1 Transmit the CD text into the MD recorder. 3 Each press switches the mode. 1 TITLE not lit : TITLE INPUT mode is off 2 TITLE blinking : TITLE INPUT mode is on 2 Record tracks while copying the CD text.
DM-9090 (En) 49 F ADE key Upper row of level meter : The level information during fade-in and fade-out is displayed graphically. Lower row of level meter : The meter segments light according to the current R + L CH level. Level meter display during fade-in/fade-out Changing the displayed contents This key allows to switch the mode of time display.
DM-9090 (En) 50 T imer operations 1 Turn the powers of the associated components ON. Playback or recording can also be activated at the desired time by using a commercially available timer. Audio timer Connect the power cords of the associated components so that their power can be turned ON through the audio timer.
DM-9090 (En) 51 In case of difficulty What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative.
DM-9090 (En) 52 Action Meaning Displayed Message NO DISC 001 UNLOCK 001 SCMS ON 001 NotAudio DISC FULL TITLE FULL BLANK DISC NO TRACKS READING WRITING DISC ERROR EDIT NOW! CAN’T EDIT ok? (blinking) PROTECTED PLAY ONLY CAN’T ACCESS CAN’T LOAD CAN’T COPY Displayed messages and actions to be taken against them ÷ Load a disc.
DM-9090 (En) 53 Remedy Cause Symptom TOC *1 : All minidiscs contain a Table of Contents (TOC) in addition to sound signals. The TOC is similar to the table of contents in a book and contains information, such as track numbers, track length, and character information, that cannot be rewritten.
DM-9090 (En) 54 Specifications [Format] System ....................................................................................... Minidisc digital audio system Laser ................................................................................
DM-9090 (En) 55 MEMO:.
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Een belangrijk punt na aankoop van elk apparaat Kenwood DM-9090 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood DM-9090 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood DM-9090 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood DM-9090 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood DM-9090 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood DM-9090 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood DM-9090 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood DM-9090 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
