Gebruiksaanwijzing /service van het product K-CD01 van de fabrikant Kenwood
Ga naar pagina of 28
K-CD01 CD-RECEIVER INSTR UCTION MANU AL © B64-2923-00/00 (M) (TKR) B64-2923-00_U.S.Indd 1 04.9.3, 4:23:34 PM.
2 | English Con tents Safety precautions 3 W ARNING CAUTION NOTE Notes 5 About CDs 6 General featur es 7 Pow er Selecting the Source Volume Audio Control Defeat Setting Switching Display Subwoofer Out.
English | 3 Safety precautions 2 CA UTION T o prev ent damage to the machine, take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
4 | English NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Audio C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio C ontrol mode Press the [ AUDIO ] button. " Audio C TRL " is displayed. 3 Select the Audio item for adjustment Press the [F M] or [AM] button.
English | 9 T uner/T V control f eatures ¢ 4 CRSC 1 – 6 AM FNC FM SRC Frequency display Band display ST indicator Preset station number T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " T uner" display .
10 | English T uner/T V control f eatures Station Pr eset Memor y Putting the station in the memory. 1 Select the band Press the [F M] or [AM] button. 2 Select the frequency to put in the memor y Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
English | 11 F unction of LX BUS T elevision TV T uning The T V channel of a connected LX BUS T elevision (optional accessory) can be selected. The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details.
12 | English CD/External disc control f eatures Playing CD When a CD is inserted Press the [SRC] button. Select the "Compact Disc" display. • When a CD is inserted, the "CD" indicator is ON. Pause and play Press the [ 38 ] button.
English | 13 F ast Forwarding and Re versing F ast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point. Reversing Hold down on the [ 4 ] button. Release your finger to play the disc at that point. T rack Search Selecting the song you want to hear .
14 | English CD/External disc control f eatures Random Play Playing all the songs on the disc in random order . Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF . When it’ s ON, "Random" is displayed. • When the [ ¢ ] button is pressed, the next song select star ts.
English | 15 Menu system Function Set Setting during operation beep sound etc. functions. The F unction Set basic operation method is explained here. The reference f or the Function items and their setting content is after this operation explanation. 1 Enter F unc tion Set mode Press the [FNC] button for at least 1 sec ond.
16 | English Menu system In Standby mode Con trast Adjustmen t Adjusting the display contrast. Display and Setting "Con trast 1" … "Con trast 7" (Original setting) … "Con trast 11" In Standby mode Selecting display mode The sound quality can be improved b y turning off the regular displays .
English | 17 In T uner mode T uning Mode Sets the tuning mode. T uning mode Display Operation Auto seek " AUT O 1" Automatic sear ch for a station. Preset sta tion seek " AUT O 2" Search in or der of the stations in the Preset memory .
18 | English Menu system In Tuner/CD/External disc contr ol mode B.M.S. (Bass Management S ystem) Adjust the bass boost level of the external amplifier using the main unit. Display Setting " AMP Bass FL T" Bass boost level is flat. " AMP Bass +6" Bass boost level is low (+6dB).
English | 19 Basic Operations of r emote Loading and Replacing the battery Use one lithium battery (CR2025). Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case . Keep on slide Pull out 2 W ARNING • Store unused batteries out of the reach of childr en.
20 | English In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations.
English | 21 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery.
22 | English Connecting W ires to T erminals ANT CONT P.CONT MUTE FRONT L FRONT R REAR L REAR R – + FRONT REAR FM/AM antenna input Subwoofer left output ( White) Subwoofer right output (Red) F use (.
English | 23 M Installation • When you install or remove the unit, hold the chassis (Metal part) to conduct the operation. If you hold the control panel, it may cause damage.
24 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is r emoved, remove the lower two locations.
English | 25 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
26 | English Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 4) of the section on 'Safety precautions' .
English | 27 Specifications subject to change without notice. Specifications Audio section Maximum output power : 40 W x 4 F ull Bandwidth Power (at less than 1% THD) : 26 W x 4 T one ac tion Bass : 1.
B64-2923-00_U.S.Indd 28 04.9.3, 4:23:55 PM.
Een belangrijk punt na aankoop van elk apparaat Kenwood K-CD01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood K-CD01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood K-CD01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood K-CD01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood K-CD01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood K-CD01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood K-CD01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood K-CD01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
