Gebruiksaanwijzing /service van het product KDC-4070RG van de fabrikant Kenwood
Ga naar pagina of 28
KDC-4070RA KDC-4070RG KDC-4070R V © B64-1271-00 (EF) COMPACT DIGITAL AUDIO CD-RECEIVER INSTR UCTION MANU AL.
— 2 — English Contents Before use Safety precautions ........................................................................3 Handling Compact discs................................................................5 Basic operations Power .........
— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground cables, make sure to use automotive- grade cables or other cables with an area of 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.
— 5 — Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged.
Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Volume Switching Modes: Each time you press the SRC button, the mode switches as follows: The mode switches to the next mode from any mode which cannot be used.
This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level.
T uner f eatur es This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off.
With the local seek function turned on, auto seek tuning skips stations with relatively poor reception. Turning Local Seek Function On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available.
RDS f eatur es Switching the Display: Each time you press the CLK button, the display switches between the Programme service name (during RDS station reception)/frequency and clock.
You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. When the Region Restrict Function is on, the region is restricted.
The display and setting will change. If the traffic information station you are tuned to experiences poor reception, this function automatically seeks another TP station.
• You can select the type of programme directly by pressing a preset button. The buttons are factory-set to the following type of programmes: 1. Music 2.
Preset the volume level to be used for traffic information and news broadcasts. Tune into the station for which you want to set the volume. Adjust the volume to the desired level. Hold down the TI VOL ADJ button for two seconds or more. The volume level blinks once in the display to indicate that the data has been stored.
• This function is only available if the desired station sends PTY- code for news bulletin or belongs to EON-Network sending PTY- code for news bulletin. • If you turn on the news bulletin function in the MW/LW band, the band is switched automatically to the FM band.
Switching to the Clock display: Each time you press the CLK button, the display switches between the Track time and Clock. Clock display Playing CDs: If no CDs are inserted, insert one in the slot with the label facing up. If a CD is already inserted, press the SRC button repeatedly until the CD mode.
Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan : Press the SCAN button. "SCAN ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order.
Other f eatur es — 19 — Play all the tracks on the current disc in random order. Press the RDM button to switch the random play function on and off. "RDM ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected.
This function produces a beep sound that accompanies button operation. It can be switched on or off. Turning the Beep On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 1 Touch Sensor Tone Shut down the audio system temporarily whenever an incoming call is received.
on or off, respectively. "SYNC ON" (Automatic time adjustment) "SYNC OFF" (Manual time adjustment) Switching settings Press either the AM button or FM button. The display and setting will change. Press the MENU button to end the menu mode.
Removing Faceplate: Press the release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached.
— 23 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION Accessories ..........................................1 ........
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 P.CONT TEL MUTE P.CONT Rear right output (Red) Rear left output (White) Battery cable (Yellow) (KDC-4070RG/4070RA only) Ignition cable (Red) (KDC-4070RG/ 4070RA only) F.
— 25 — Installation Connecting the ISO Connector (see p.24) (KDC-4070RG/4070RA only) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below.
English — 26 — Removing the hard rubber frame ■ When the lower level is removed, remove the upper two locations. 2 The frame can be removed from the top side in the same manner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the two locks on the lower level.
— 27 — What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM A speaker cable may be pinched by a screw in the car.
— 28 — Specifications FM tuner section Frequency range (50 kHz Space) ...............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ..................................0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) ........................
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-4070RG (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-4070RG heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-4070RG vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-4070RG leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-4070RG krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-4070RG bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-4070RG kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-4070RG . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
