Gebruiksaanwijzing /service van het product KDC-508 van de fabrikant Kenwood
Ga naar pagina of 32
KDC-5027 KDC-508 CD-RECEIVER INSTR UCTION MANU AL © B64-2701-00 (EN /E2N/EW/E2W ) KDC-5027_E_2701_U.S_r2.Indd 1 03.10.2, 0:22:04 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Abo ut CDs 6 G eneral fea tures 7 Pow er Selecting the Source Volume System Q A udio Control Speaker Setting Switching Display A uxiliary I nput D.
English | 3 Sa fe ty precautions 2 CA UTION To pre vent damage to the machine, tak e the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 7 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. • When the power is ON, the 'Security Code' (page 20) is displayed as “CODE ON” or “CODE OFF” . Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
8 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 9 T he frequency is displayed during Progr am Ser vice name reception Pr ess the [DISP] button for at least 1 second . The frequency for the RDS station will be displayed for 5 seconds inst ead of the Program Service name.
10 | English G eneral f eatures Th ef t Deterrent F aceplate T he faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Pr ess the Release button. Drop open the faceplate. 2 Drawing the facepla te to left side pull it to the front and remov e it.
English | 11 T uner featur es Tu n ing S electing the station. 1 S elect tuner source Pr ess the [SRC] button. Select the " TUNER" display . 2 S elect the band Pr ess the [FM] or [AM] butt on. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands.
12 | English T uner featur es Au to Memory Entr y P utting a station with good reception in the memory automatically. 1 S elect the band for Auto Memory Entry Pr ess the [FM] or [AM] butt on. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 13 RDS featur es Tr affic Information S witching to traffic inf ormation automatically when a traffic bulletin starts even when you aren't listening to the radio . Pr ess the [ TI] button. Each time the button is pressed the Traffic In for mation func tion turns ON or OFF .
14 | English RDS featur es PTY (Progr am T ype) S electing the Program Type and searching f or a station. 1 Enter PTY mode Pr ess the [PTY ] button. During PT Y mode the "PT Y" indicator is ON. • This function can' t be used during a traffic bulletin or AM r eception.
English | 15 Changing Language for PTY Function S electing the Program Type display language . 1 Enter PTY mode Refer to 'PTY (Program Type)' (page 14). 2 Enter Changing Language mode Pr ess the [DISP] button. 3 S elect the language Pr ess the [FM] or [AM] butt on.
16 | English CD/External disc control f eatures Playing CD W hen there is no disc inserted 1 Drop open the faceplate Pr ess the Release button. 2 I nsert a disc. 3 Pr ess the faceplate on the left side, and r eturn it to its former position. • When the faceplate has been dropped open, it might interfere with the shift lever or something else.
English | 17 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Pr ess the [SRC] button. Select the display for the disc player you want. Display examples: D isplay Disc player "CD2" CD player "DISC CH" CD changer/ MD changer P ause and play Pr ess the [ 38 ] button.
18 | English CD/External disc control f eatures Ra ndom Play Playing all the songs on the disc in random order . Pr ess the [RDM] button. Each time the button is pressed Random Play turns ON or OFF . When it's ON, "RDM ON" is displayed.
English | 19 Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
20 | English Menu system In Standby mode Secur ity Co de Because authorization by the Security Code is r equired when it's remo ved from the vehicle, personalizing this unit is by using the Security C ode is a help in preventing theft. • When the Security Code function is activated it can' t be released.
English | 21 Sy nchronize Clock S ynchronizing the RDS station time data and this unit's clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manually . • It takes 3 to 4 minutes to synchronize the clock.
22 | English Menu system In T uner mode Tu ning Mode S ets the tuning mode. T uning mode Display Operation Au to seek " AUT O 1" Automatic sear ch for a station. Pr eset station seek " AUT O 2" Search in or der of the stations in the Preset memory .
English | 23 Pow er OFF T imer S etting the timer to turn this unit's power OFF automatically when Standby mode continues. U sing this setting can save the v ehicle's batter y power . Display Setting "OFF – – –" Power OFF Timer function is OFF .
24 | English A cc essories/ Installa tion Procedur e A cce ssories ➀ ..........1 ➁ ..........2 ➂ ..........1 ➃ ..........1 ➄ ..........1 ➅ ..........2 Installation Proc edure 1. T o prevent short circuits, remove the key from the ignition and disconnect the - ter minal of the battery.
English | 25 TEL MUTE P.CONT ANT.CONT REMO.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 C onnecting W ires to T erminals Fu se (10A) Wir ing harness (A ccessory 1 ) Rear right output (Red) Rear left output ( .
26 | English C onnecting W ires to T erminals C onnector F unc tion Guide P in Numbers f or ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Batter y A-5 Blue/White Power Co.
English | 27 Installation Sc re wing the F acepla te on the Unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the section 'Removing the hard rubber frame' (page 28) and then remove the hard rubber frame.
28 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
English | 29 Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
30 | English ? Ca n’ t remove disc. ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC swit ch was turned OFF . ☞ The disc can only be removed within 10 min- utes of the ACC swit ch being turned OFF . I f more than 10 minutes has elapsed, turn the AC C switch ON again and press the Eject but- t on.
English | 31 Specifications Specifications subject to change without notice. FM tuner section Fr equenc y range (50 kHz space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 µV /75 Ω Fr equenc y response (±3.
KDC-5027_E_2701_U.S_r2.Indd 32 03.10.2, 0:24:25 PM.
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-508 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-508 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-508 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-508 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-508 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-508 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-508 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-508 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
