Gebruiksaanwijzing /service van het product KDC-8026 van de fabrikant Kenwood
Ga naar pagina of 40
KDC-8026 CD-RECEIVER INSTR UCTION MANU AL © B64-2745-00/01 (MV) B64-2745-00_U.S(M).Indd 1 03.11.27, 3:26:11 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 Abo ut CDs 8 Notes on Multi-function Key Sy stem 9 G eneral fea tures 10 Pow er H iding the Control P anel Selecting th.
English | 3 Sa fe ty precautions 2 WA RNING To pr event injury or fire, tak e the f ollowing precautions: • Insert the unit all the way in until it is fully locked in place.
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited . When writing MP3/WMA, pay attention to the f ollowing restrictions. A cc eptable media The MP3/WMA recor ding media acceptable to this unit are CD-ROM, CD-R, and CD -RW.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 Notes on Multi-function Key S ystem Multi-function Key System ser ves to control various functions with the [2] — [5] buttons. The basic operation of the Multi-function Key System is described below .
10 | English G eneral f eatures Powe r Tu rning ON the Pow er T urn the vehicle ignition ON. The panel appears. • When the power is ON, the 'Security Code' (page 32) is displayed as "CODE ON" or "C ODE OFF" . Tu ring OFF the Pow er T urn the vehicle ignition OFF or press the [SRC] button for at least 1 second.
English | 11 Se lecting the Source Pr ess the [SRC] button. S ource required Display T uner "TUNER" CD "CD" External disc (Optional accessory) "CD CH"/"CD2" TV .
12 | English G eneral f eatures Aud io C ontrol 1 S elect the source for adjustment Pr ess the [SRC] button. 2 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until " AUD" is displayed above the [2] button.
English | 13 2nd section [2] button A djustment Item Display Range Fr ont/Rear High P ass Filter "HPF" THRU/100/125/170 Hz [3] button A djustment Item Display Range Subwoofer L ow Pass F ilt.
14 | English G eneral f eatures In External disc, or Auxiliary input source Du al Zone S ystem M akes the sound different f or the front channel and rear channel. Output the Internal source sound from either one of the front or rear channels, and the sound of other source from the Dual z one channel.
English | 15 Te xt Displa y Switching S witching the text display . 1 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until "DISP" is displayed above the [3] button. Refer to 'Notes on Multi-function Key System' (page 9).
16 | English G eneral f eatures Sta tion/Disc Naming (SNPS/DNPS) A ttaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to a ttach a title to • A title can ’t be attached to an MD. • Refer to the 'T ex t Display Switching' (page 15) and select either "DNPS" or "SNPS" .
English | 17 Repeatedly press the button until "PNL " is displayed above the [4] button. Refer to 'Notes on Multi-function Key System' (page 9). 2 Enter Panel P osition Setting mode Pr ess the [4] ("PNL ") button. 3 S elect the item for adjustment Pr ess the desired [2] — [5] button.
18 | English T uner/T V contr ol features Tu ning Mode Choose the tuning mode. Pr ess the [A UTO ] button. Each time the button is pressed the Tuning mode switches as shown below . T uning mode Display Operation Au to seek " Auto 1" A utomatic search for a station.
English | 19 C anceling Dir ec t A ccess T uning Pr ess the [DIRECT ] button on the remote. Sta tion Preset Memory P utting the station in the memory. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 S elect the frequenc y to put in the memory Pr ess the [ 4 ] or [ ¢ ] button.
20 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Open the panel to insert disc Pr ess the [ 0 ] button. 2 I nsert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
English | 21 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Pr ess the [SRC] button. Select the display for the disc player you want.
22 | English CD/MP3/WMA/External disc control f eatures Tr ack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or MP3/WMA folder y ou’ re listening to . 1 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until "REP" is displayed above the [4] button.
English | 23 F unction of MP3/WMA Fo lder S elect Quickly selecting the folder you want to listen to . 1 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until "FSEL " is displayed above the [5] button.
24 | English Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 25 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second . When "MENU" is displayed , "Securit y" is displayed . 3 Enter Security Code mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
26 | English Menu system Se lectable Illumination S electing the button illumination color as green or re d. Display Setting "Button Green" The illumination c olor is green.
English | 27 In Standby mode Built-in Amp Mute Setting T oggles ON or OFF the mute control on the built- in amplifier . Tu rning ON this control enhances the pr eout quality. Display Setting "A MP Mute OFF" The built-in amplifier activates. "A MP Mute ON" T he built-in amplifier deactivates.
28 | English Menu system When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Pr ess the [FM] or [AM] butt on. Select the " AMP Control" display . 2 Enter AMP Contr ol mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
English | 29 Basic Operations of r emote Lo ading and Replacing the battery U se two " AA "-size batteries. Slide the cover while pr essing downwards to r emove it as illustrated . I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
30 | English Basic Operations of r emote In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
English | 31 A cc essories/ Installa tion Procedur e A cce ssories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........2 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - batter y .
32 | English C onnecting W ires to T erminals ANT. CONT P.CONT TEL MUTE FRONT • L FRONT • R REAR • L REAR • R – + AUX IN REAR FRONT SUB WOOFER F M/AM antenna input Rear left output ( White)/.
English | 33 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
34 | English Installation Lo cking the Backpanel to the unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the Removing the Backpanel function of the section on ' Theft Deterrent P anel' (page 17) and remove the Backpanel.
English | 35 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
36 | English Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
English | 37 T uner source ? Ra dio reception is poor . ✔ The car antenna is not extended. ☞ P ull the antenna out all the way . ✔ The antenna control wire is not connected. ☞ C onnect the wire correctly, ref erring to the section on 'Connecting Wir es to T erminals' .
38 | English Tr oubleshooting Guide T he messages shown below displa y your systems condition. EJ ECT: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit.
English | 39 Specifications subject to change without notice. FM tuner section Fr equenc y range 200 kHz space : 87.9 MH z – 107.9 MHz 50 kHz space : 87.5 MH z – 108.0 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
B64-2745-00_U.S(M).Indd 40 03.11.27, 3:27:18 PM.
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-8026 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-8026 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-8026 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-8026 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-8026 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-8026 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-8026 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-8026 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
