Gebruiksaanwijzing /service van het product KDC-MP533V van de fabrikant Kenwood
Ga naar pagina of 28
CD-RECEIVER KDC-MP533V INSTR UCTION MANU AL © B64-3476-00/00 (MW) B64-3476-00_00_English.Indd 1 B64-3476-00_00_English.Indd 1 06.6.19 11:12:21 AM 06.6.
2 | English Con tents Safety precautions 3 Notes 4 About CDs 5 About MP3 and WMA 6 General featur es 7 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting .
English | 3 Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you tr y to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. Lens F ogging When you turn on the car heater in cold weather , dew or condensation may form on the lens in the CD player of the unit.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button.
English | 5 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
6 | English About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 7 General fea tures SRC Q ATT VOL Clock display A TT indic ator LOUD indicator Control knob Release button Selecting the S ource Press the [SRC] button.
8 | English General fea tures Audio Setup Setting the Sound system, such as Volume offset and Loudness. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob.
English | 9 Switching Displa y Changing the information display ed. 1 Enter Switching Displa y mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob towards [ 4 ] or [ ¢ ].
10 | English General fea tures TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
English | 11 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
12 | English T uner features Station Pr eset Memor y Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequency to put in the memor y Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
English | 13 CD/Audio file/V CD control f eatures Playing CD , Audio file & VCD When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 Insert a disc. 3 Push the facepla te on the left side, and return it to its former position.
14 | English CD/Audio file/V CD control f eatures F ast Forwarding and Re versing F ast Forwarding Hold down the Contr ol knob toward [ ¢ ]. Release to resume the playback. Reversing Hold down the Contr ol knob toward [ 4 ]. Release to resume the playback.
English | 15 F unction of Audio file Folder Select Quickly selecting the folder you want to hear . 1 Enter F older Selec t mode Press the [F .SEL] button. "FOLD SEL " is displayed. During Select mode the folder information is displayed as shown below .
16 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 17 In Standby mode T ouch Sensor T one Setting the operation check sound (beep sound) ON/OFF . Display Setting "BEEP ON" Beep is heard. "BEEP OFF" Beep canceled . In Standby mode DSI (Disabled Sy stem Indicator) A red indicator will blink on the unit after the faceplate is remov ed, warning potential thieves.
18 | English Menu system T ext Scroll Setting the displayed text scroll. Display Setting "SCL AUT O" Repeats scroll . "SCL MANU" Scr olls when the display changes. In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD b y force.
English | 19 Basic Operations of r emote control Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
20 | English Basic Operations of r emote control Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures f or Audio control and others operations.
English | 21 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........2 6 ..........1 7 ..........1 8 ..........1 9 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery.
22 | English Connecting W ires to T erminals ANT CONT MUTE P.CONT ILLUMI REAR R REAR L FRONT R FRONT L – + AUX IN R L PRK SW VIDEO OUT Battery Ground wire (Black) - ( T o car chassis) FM/AM antenna .
English | 23 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Ref er to the section <Removing the hard rubber frame> (page 25) and then remove the hard rubber frame.
24 | English Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off . 1 Ref er to the section <Removing the hard rubber frame> (page 25) and then remove the hard rubber frame. 2 Drop open the faceplat e by pressing the Release button.
English | 25 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is r emoved, remove the lower two locations.
26 | English What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn.
English | 27 Disc source ? The specified disc does not play , but another one plays instead . ✔ The specified CD is quit e dir ty. ☞ Clean the CD. ✔ The disc is sev erely scratched. ☞ T r y another disc instead. ? Can ’t remove disc . ✔ The cause is that mor e than 10 minutes has elapsed since the vehicle ACC swit ch was turned OFF .
28 | English CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle speed : 500 – 200 rpm (CL V ) Wow & F lutter : Below Measurable Limit Fr equency response (±1 dB) : 10 Hz – 20 kH z T otal har monic distortion (1 kHz) : 0.
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-MP533V (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-MP533V heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-MP533V vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-MP533V leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-MP533V krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-MP533V bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-MP533V kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-MP533V . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
