Gebruiksaanwijzing /service van het product KDC-W40G van de fabrikant Kenwood
Ga naar pagina of 36
© B64-3294-00/00 (EW/EN/E2W/E2N) CD-RECEIVER KDC-W4534 KDC-W4034A/G/A Y/GY KDC-W434A/G/GY KDC-W410A/G/A Y/GY KDC-W40G KDC-3034A/G INSTR UCTION MANU AL B64-3294-00_English.
2 | English Con tents Safety precautions 3 Notes 4 About MP3 and WMA 6 About CDs 7 General featur es 8 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting .
English | 3 Safety precautions About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button.
English | 5 This Pr oduct is not installed by the manufac turer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
6 | English About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not comforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 7 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
8 | English SRC Q ATT/DIM VOL Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF . When the Attenuator is ON, the " A T T" indicator blinks. V olume Increasing V olume T urn the [ VOL] knob clockwise.
English | 9 Audio Setup Setting the Sound system, such as Volume offset and Loudness. 1 Select the source to adjust Press the [SRC] button. 2 Enter A udio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob.
10 | English In CD & External disc source Information Display Disc title (In External disc source or KDC- W4534/W4034A/W4034A Y/W4034G/ W4034GY/W434A/W434G/W410A/W410A Y/ W410G/W410GY/W40G/W434GY .
English | 11 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
12 | English SRC AUTO/ AME 1 - 6 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
English | 13 Station Pr eset Memor y Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequency to put in the memory Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
14 | English SRC 1 - 6 5* RDS featur es F unction of the KDC-W4534/KDC-W4034A/A Y/G/GY/KDC-3034A/G/KDC-W410A/A Y/G/GY T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio .
English | 15 PTY (Progr am T ype) Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the C ontrol knob. During PT Y mode the "PT Y" indicator is ON. • This function cannot be used during a traffic bulletin or AM reception.
16 | English RDS featur es F unction of the KDC-W4534/KDC-W4034A/A Y/G/GY/KDC-3034A/G/KDC-W410A/A Y/G/GY Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 15). 2 Enter Changing Language mode Press the [TI] button.
English | 17 SRC SCAN REP F.SEL M.RDM RDM/ 3 0 Playing CD & A udio file When a disc is inserted Press the [SRC] button. Select the "CD" display. • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the C ontrol knob.
18 | English Random Play Playing all the songs on the disc in random order . Press the [RDM] button. Each time you press the button, Random Play turns ON or OFF . When the Random mode is ON, "DISC RDM"/ "FOLD RDM" is displayed. • When you push the Control knob toward [ ¢ ], the next random song star ts.
English | 19 F unction of the KDC-W4534/KDC-W4034A/A Y/G/ GY/KDC-W434A/G/KDC-W410A/A Y/G/GY/KDC- W40G/KDC-W434GY T ext/Title Scroll Scrolling the displayed CD text, Audio file t ext, or MD title. Push the Contr ol knob toward [FM] for a t least 2 seconds.
20 | English SRC MENU Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation.
English | 21 F unction of the KDC-W4534 In Standby mode Secur ity C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
22 | English Menu system In Standby mode Manual Clock Adjustment • Y ou can do this adjustment when the <Synchronize Clock> (page 22) is set as OFF . 1 Select Clock Adjustment mode Push the Contr ol knob towards [FM] or [ AM]. Select the "CLK ADJ" display.
English | 23 F unction of the KDC-W4534/KDC-W4034A/A Y/G/ GY/KDC-3034A/G/KDC-W410A/A Y/G/GY New s Bulletin with Timeout Setting The tuner automatically changes when a news bulletin starts even if the radio is not being listened to . Also, you can set the time interval when interruption is prohibited .
24 | English Menu system F unction of the KDC-W4534/KDC-W4034A/A Y/G/ GY/KDC-3034A/G/KDC-W410A/A Y/G/GY Auto TP S eek When the TI function is ON and the reception is poor while listening to a traffic information station, another traffic information station with better reception will be sear ched for automatically .
English | 25 In Standby mode Po wer OFF Timer Setting the timer to turn this unit’ s power OFF automatically when Standby mode continues. Using this setting can save the v ehicle’ s battery power . Display Setting "OFF – – –" Po wer OFF Timer function is OFF .
26 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 Installation Proc edure 1. T o prevent shor t circuits, r emove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit.
English | 27 Connecting W ires to T erminals P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 REMO. CONT MUTE Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the K enwood navigation system, consult your navigation manual.
28 | English Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White P ower Contro.
English | 29 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
30 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
T roubleshooting Guide English | 31 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
T roubleshooting Guide 32 | English Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 3) of the section on <Safety precautions>.
English | 33 The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ Inser t the CD. NO DISC: No disc has been loaded in the disc magazine.
FM tuner section Fr equency range (50 kH z space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.
Audio section Maximum output power KDC-W4534/W4034A Y/W4034GY/W434GY/ W410A Y/W410GY : 50 W x 4 KDC-W4034A/W4034G/3034A/3034G/ W434A/ W434G/W410A/W410G/W40G : 45 W x 4 Output power (DIN 45324, +B=14.
B64-3294-00_English.indd 36 B64-3294-00_English.indd 36 05.10.6 0:51:58 PM 05.10.6 0:51:58 PM.
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-W40G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-W40G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-W40G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-W40G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-W40G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-W40G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-W40G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-W40G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
