Gebruiksaanwijzing /service van het product KDC-W6027 van de fabrikant Kenwood
Ga naar pagina of 36
KDC-W6027 KDC-WV6027 CD-RECEIVER INSTR UCTION MANU AL © B64-2704-00/00 (EN/E2N/EW/E2W) B64-2704-00_U.S(E).Indd 1 03.11.6, 8:49:42 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 A bout CDs 8 G eneral fea tures 9 Pow er Selecting the Source Volume System Q A udio Control Speaker Setting Subwoofer .
English | 3 Sa fe ty precautions 2 CA UTION To pr event damage to the machine , take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited . When writing MP3/WMA, pay attention to the f ollowing restrictions. A cce ptable media The MP3/WMA recor ding media acceptable to this unit are CD-ROM, CD-R, and CD -RW.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. • When the power is ON, the 'Security Code' (page 22) is displayed as "CODE ON" or "C ODE OFF" . Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
10 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 11 Subw oofer Output Tu rning the Subwoof er output ON or OFF . Pr ess the [SW ] button for at least 1 sec ond. Each time the button is pressed Subwoof er output switches ON or OFF .
12 | English G eneral f eatures A uxiliary Input Display Setting S electing the display when this device is switched to A uxiliary input source. 1 S elect Auxiliary input source Pr ess the [SRC] button. Select the " AUX EXT " display . 2 Enter Auxiliary input display setting mode Pr ess the [DISP] button for at least 2 seconds .
English | 13 T uner featur es T uning S electing the station. 1 S elect tuner source Pr ess the [SRC] button. Select the " TUNER" display . 2 S elect the band Pr ess the [FM] or [AM] butt on. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands.
14 | English T uner featur es Au to Memor y Entry P utting a station with good reception in the memory automatically. 1 S elect the band for Auto Memory Entry Pr ess the [FM] or [AM] butt on. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 15 RDS featur es Tr affic Information S witching to traffic inf ormation automatically when a traffic bulletin starts even when you aren ’t listening to the radio . Pr ess the [ TI] button. Each time the button is pressed the Traffic In for mation func tion turns ON or OFF .
16 | English RDS featur es PTY (Progr am T ype) S electing the Program Type and searching f or a station. 1 Enter PTY mode Pr ess the [PTY ] button. During PT Y mode the "PT Y" indicator is ON. • This function can’t be used during a traffic bulletin or AM r eception.
English | 17 Changing Language for PTY Function S electing the Program Type display language . 1 Enter PTY mode Refer to 'PTY (Program Type)' (page 16). 2 Enter Changing Language mode Pr ess the [DISP] button. 3 S elect the language Pr ess the [FM] or [AM] butt on.
18 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Drop open the faceplate Pr ess the Release button. 2 I nsert a disc. 3 Pr ess the faceplate on the left side, and r eturn it to its former position.
English | 19 • The MP3/WMA media that this unit can play are CD- R OM, CD-R, and CD-R W . The medium formats must be ISO 9660 Level 1, L evel 2, Joliet, or Romeo. The methods and precautions to be followed f or writing MP3/WMA data are covered in 'Notes on playing MP3/WMA ' (page 6).
20 | English CD/MP3/WMA/External disc control f eatures Sc an Play Playing the first part of each song on the disc or MP3/WMA folder y ou are listening to and searching for the song y ou want to listen to. 1 S tart Scan Play Pr ess the [SCAN] button. "Scan ON" is displayed.
English | 21 2 Enter name set mode Pr ess the [NAME.S] button for at least 2 seconds. "NAME SET " is displayed . 3 Move the cursor to the enter char acter position Pr ess the [ 4 ] or [ ¢ ] button. 4 S elect the character type Pr ess the [ 38 ] button.
22 | English Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 23 y our "Car Audio P assport" in this pack age. 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second . When "MENU" is displayed , "Securit y" is displayed .
24 | English Menu system S ynchr onize Clock S ynchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manually . • It takes 3 to 4 minutes to synchronize the clock.
English | 25 Co nt r ast A djustment A djusting the display contrast. D isplay and Setting "Con trast 0" … "Con trast 5" (Original setting) … "Con trast 10" Dimmer Dimming this unit’ s display automatically when the vehicle light switch is turned ON.
26 | English Menu system AF (A lternative F requency) When poor reception is experienced , automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON.
English | 27 "OFF 20MIN" (O riginal setting) T urns the power OFF after 20 minutes . "OFF 40MIN" T urns the power OFF after 40 minut es. "OFF 60MIN" T urns the power OFF after 60 minut es. • This setting is done after setting 'Security Code' (page 22).
A cc essories/ Installa tion Procedur e A cc essories ➀ ..........1 ➁ ..........2 ➂ ..........1 ➃ ..........1 ➄ ..........1 ➅ ..........2 Installation Proc edure 1. T o prevent short circuits, remove the key from the ignition and disconnect the - ter minal of the battery.
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TEL MUTE P.CONT ANT.CONT FRONT C onnecting W ires to T erminals Rear right output (Red)/ Subwoofer right output (Red) Rear left output ( White)/ Subwoofer left output (.
C onnecting W ires to T erminals C onnector F unc tion Guide P in Numbers for ISO Connectors C able Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White Power Control A-6 Oran.
Installation Sc re wing the F acepla te on the Unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the section 'Removing the hard rubber frame' (page 32) and then remove the hard rubber frame.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
Disc source ? "A UX EXT" is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 4) of the sec tion on 'Safety precautions' .
T he messages shown below displa y your systems condition. EJ ECT: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ I nsert the CD. No Disc: No disc has been loaded in the disc magazine.
Specifications subject to change without notice. FM tuner section Fr equenc y range (50 kHz space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 µV /75 Ω Fr equenc y response (±3.
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-W6027 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-W6027 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-W6027 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-W6027 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-W6027 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-W6027 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-W6027 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-W6027 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
