Gebruiksaanwijzing /service van het product KDC-X790 van de fabrikant Kenwood
Ga naar pagina of 64
CD-RECEIVER KDC-X790 KDC-MP732 INSTR UCTION MANU AL © B64-3301-00/01 (KW/K0) T ake the time to r ead through this instruction manual. F amiliarity with installation and operation procedur es will help you obtain the best performance from your new CD-receiv er .
2 | English Con tents Safety precautions 4 Notes 5 W arning 6 About CDs 7 About AA C, MP3 and WMA 8 Notes on Multi-function Key Sy stem 9 General featur es 10 Pow er Selecting the Source Volume Attenu.
English | 3 The " AAC" logo is trademark of Dolby Laboratories. Menu system 38 Menu System Activating Security Code Deactivating Securit y Code T ouch Sensor T one Manual Clock Adjustment Da.
4 | English Safety precautions • Do not apply excessiv e force to the open faceplate or place objects on it. Doing so will cause damage or breakdown. • Do not use your own scr ews. Use only the screws provided. If you use the wrong scr ews, you could damage the unit.
English | 5 Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button to restor e factor y settings.
6 | English 2 CAUTION Use of controls or adjustments or performance of procedures other than those specified her ein may result in hazardous radiation exposur e. In compliance with Federal Regulations, f ollowing are repr oductions of labels on, or inside the product relating to laser product saf ety.
English | 7 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 9 Notes on Multi-function Key S ystem Multi-function Key System ser ves to control various functions with the [1] — [6] buttons. The basic operation of the Multi-function Key System is described below .
10 | English General fea tures Powe r T urning ON the Power Press the [SRC] button. T urning OFF the Power Press the [SRC] button for at least 1 sec ond.
English | 11 Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to adjust Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "SYS.Q" is displayed above the [1] button.
12 | English General fea tures F unction of the KDC-X790 Adjusting the detail of A udio Con t ro l Among the Basic Audio items, y ou can adjust the Bass level, Middle level, and Treble lev el in detail.
English | 13 • Dual Z one System Main source and sub source (Auxiliary input) output Fr ont channel and Rear channel separately. - Set up the channel of sub source by <Dual Zone System Setting> (page 45). - Select Main source by [SRC ] button.
14 | English General fea tures Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
English | 15 7 Source icon display part 8 F unction item display 9 G-Analyzer display part 5 Exit display c ontrol mode Press the [6] ("RTN") button. • Under the display type other than "Display Type D" , the function item is not displayed.
16 | English General fea tures Display T ype A/ Display T ype B W allpaper selec ting Selecting a wallpaper to display when Display T ype is set to "Display T ype A "/ "Display T ype B" . 1 Select the wallpaper display Refer to <Graphic part Display Switching> (page 15).
English | 17 In Audio file sourc e Information Display Song title & Ar tist name "Title/Artist"* Album name & Artist name " Album/Ar tist"* Folder name "Folder Name&qu.
18 | English General fea tures Display T ype C/ Display T ype D T ext Display Switching Changing the text display . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button.
English | 19 In HD Radio source Information Display Station name "Station Name"* Title "T itle"* Fr equency "Frequency" Clock "Clock" Date "Date" In S.
20 | English General fea tures The text display in the Middle t ext display part In T uner source Information Display Clock "Clock" Date "Date" Blank "Blank" Radio text (.
English | 21 In Audio file sourc e Information Display Indicator "Sta tus" Clock "Clock" Date "Date" Blank "Blank" Song title & Ar tist name "Title/Art.
22 | English General fea tures Display T ype E G-Analyzer displa y Switching Alternates G-Analyzer display when the Displa y type is set to "Display T ype E" .
English | 23 Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD . 1 Receiv e/play the station/disc you w ant to attach a title to • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button f or at least 1 second.
24 | English T uner featur es T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
English | 25 F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed.
26 | English RDS featur es F unction of the KDC-X790 Radio T ext Scroll Scrolling the displayed radio text. Push the Contr ol knob toward [FM] for a t least 2 seconds. • When the <Display Illumination Control> (page 41) is set to OFF , the display may black out while scrolling.
English | 27 No. Program T ype Display 1. Speech " All Speech" 2. Music " All Music" 3. News "News" 4. Information "Information" 5. Sports "Sports" 6. T alk "T alk" 7. Rock "Rock" 8.
28 | English CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Open the panel Press the [ 0 ] button. 2 Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function.
English | 29 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD Changer" CD changer "MD Changer" MD changer Pause and play Press the C ontrol knob.
30 | English CD/Audio file/External disc contr ol features T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder f older you are listening to . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "REP" is displayed above the [4] button.
English | 31 Random Play Play all the songs on the disc or Audio file f older in random order . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button. Refer to <Notes on Multi-function Key System> (page 9).
32 | English CD/Audio file/External disc contr ol features F unction of the KDC-X790 F unction of ACDrive disc Switching the Pla y mode Arrange the playing orders of the songs by categories. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.
English | 33 F unction of the KDC-X790 F unction of ACDrive disc Letter Seek Y ou can search for the song, y ou want to play , by selecting the initial of Genre name, Artist name, or Album name. 1 Select the key function section Press the [NEXT] button.
34 | English SIRIUS tuner contr ol features Selec t SIRIUS Satellite Radio Mode Selecting the SIRIUS Satellite Radio T uner (optional accessory) connected to this unit. Selecting SIRIUS Mode Press the [SRC] button. Select the "SIRIUS" display.
English | 35 Cat egor y and Channel Search Selecting the channel and categor y you want to receive . 1 Enter Ca tegor y and Channel Search mode Press the C ontrol knob. 2 Select the Category Push the Contr ol knob towards [FM] or [ AM]. • It is the item when the categor y of Middle text display part is selec ted.
36 | English Preset T uning Recalling the channels in the memory. 1 Select the preset band Push the Contr ol knob toward [FM]. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" — "[6]" ar e displayed above the [1] — [6] buttons .
English | 37 HD Radio control f eatures About HD Radio • When you c onnect an HD R adio, Tuner f eatures of the unit are disabled and changed to HD Radio tuner features.
38 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 39 In Standby mode Activating Security C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
40 | English In Standby mode T ouch Sensor T one Setting the operation check sound (beep sound) ON/OFF . Display Setting "Beep : ON" Beep is heard. "Beep : OFF" Beep canceled. In Standby mode Manual Clock Adjustment • Y ou can do this adjustment when the <Synchronize Clock> (page 41) is set as OFF .
English | 41 F unction of the KDC-X790 In Standby mode Synchr onize Clock Synchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC : OFF" Adjust the time manually . "SYNC : ON" Synchr onizes the time.
42 | English In Standby mode G-Analyzer C alibration setup G-Analyzer requires calibration f or horizontal acceleration and braking. • T o ensure accurate calibration, go through the following steps at a level place wher e you can move the vehicle straight ahead.
English | 43 In Standby mode G-Analyzer Horsepo wer Gauge setup Enter vehicle class and weight to calculat e horsepower . 1 Select the G-Analyzer Horsepower Gauge setup mode Push the Contr ol knob towards [FM] or [ AM]. Select the "Hp G auge Setup" display .
44 | English Menu system G-Analyzer Horsepo wer Analy sis This measures the horsepow er and displays graph and max power . I t automatically saves the highest record. • Do not use G-Analyzer Horsepower Analysis on the Public roads . • Do not use this product in any way that prevents y ou from driving safely .
English | 45 Other than Standby mode/ When the Dual Zone Syst em is ON Dual Zone Sy stem Setting Setting the Front channel and Rear channel sound in the Dual Zone Syst em. Display Setting "Zone 2 : Rear" Sub source (A uxiliar y input source) is t o be rear channel.
46 | English Menu system F unction of the KDC-X790 Other than Standby mode B.M.S. F requency Offset Setting the central frequency, boost ed by B.M.S. Display Setting " AMP FREQ : Normal" Boost with the normal central frequency . " AMP FREQ : Low" Drop the normal central fr equency 20%.
English | 47 In HD Radio mode Receiv e mode Setting Sets the receive mode . 1 Select the Receive mode Push the Contr ol knob towards [FM] or [ AM]. Select the "Receive Mode" display. 2 Enter Receive mode Press the C ontrol knob for at least 1 second.
48 | English Menu system T ext Scroll Setting the displayed text scroll. Display Setting "Scroll : Aut o" Repeats scroll . "Scroll : Manual" Scrolls when the display changes.
English | 49 8 Exit the downloading mode Press the [MENU] button. • Do not operate this unit,while "Downloading" is displayed to prev ent data from being damaged.
50 | English Menu system Other than Standby mode Audio Pr eset Memor y Registering the value setup by Sound Contr ol. The memory cannot be erased by the Reset button. 1 Setup Sound Contr ol Refer to the f ollowing operations to setup the Sound Control.
English | 51 Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 50). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed .
52 | English Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 53 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 11) for the operation method, such as the procedures f or Audio control and others operations.
54 | English In SIRIUS tuner source [FM] button Selects the preset band. [ 4 ]/ [ ¢ ] buttons Searches up or down channels. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset channels. [DIRECT ] button Enters and cancels the <Direct Access Tuning> (page 35) mode.
English | 55 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery.
56 | English Connecting W ires to T erminals ANT . CONT MUTE P .CONT FRONT • L FRONT • R REAR • L REAR • R – + FRONT SUB WOOFER AUX IN REMO.CONT REAR FM/AM antenna input Fr ont left output (.
English | 57 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 59) and then remove the hard rubber frame.
58 | English Installation Screwing the F aceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified.
English | 59 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, remove the lower two locations.
60 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
English | 61 T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals>.
T roubleshooting Guide 62 | English Audio file sourc e ? Cannot play an A udio file. ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7). ? The sound skips when an Audio file is being played .
English | 63 Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner .
64 | English Specifications FM tuner section Fr equency range (200 kH z space) : 87.9 MHz – 107.9 MH z Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
Een belangrijk punt na aankoop van elk apparaat Kenwood KDC-X790 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood KDC-X790 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood KDC-X790 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood KDC-X790 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood KDC-X790 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood KDC-X790 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood KDC-X790 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood KDC-X790 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
