Gebruiksaanwijzing /service van het product VR-506 van de fabrikant Kenwood
Ga naar pagina of 44
Operations Preparations Additional Information Remote Control AUDIO VIDEO SURROUND RECEIVER VR-506 VR-505 VR-517 KRF-V6050D KRF-V5050D KRF-V5550D INSTR UCTION MANU AL KENW OOD CORPORA TION B60-4942-10.
2 Preparations Units are designed for operation as follows. U.S.A. and Canada ........................................... AC 120 V only Australia ........................................................... AC 240 V only Europe and U.K. ...............
3 Operations Operations Preparations Remote Control Additional Information Before applying the power ................... 2 Safety precautions .............................................. 2 Unpacking ..................................................
4 Preparations Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
5 Preparations A SPEAKERS B STANDBY POWER LISTEN MODE SOUND MULTI CONTROL SOURCE DIRECT AUTO/CINEMA EQ. BAND MEMORY INPUT SELECTOR VOLUME CONTROL UP DOWN DSP MODE DTS INPUT MODE SET UP S-VIDEO V L – AUDIO – R AV AUX DIMMER MONITOR PHONES ON/STANDBY ON OFF DOLBY DIGITAL TI.
6 Preparations 1 B.BOOST DISC SKIP DVD PHONO CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 CINE.EQ AV AUX 23 POWER POWER TV VCR DVD CABLE DSS RETURN OSD MENU P.CALL TUNING MUTE VOLUME A/B+100 TV SEL. RECEIVER AUTO INPUT SEL. TITLE DISC SEL. DVD CHANNEL ENTER BAND P.
7 Preparations 1 DISC SKIP BASS BOOST AUTO PHONO/AUX CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 23 POWER DVD POWER RECEIVER MENU P.CALL TUNING MUTE VOLUME A/B+100 DVD ENTER BAND P.CALL MULTI CONTROL 45 6 78 9 0 +10 SET UP OSD SOUND RETURN TITLE LISTEN MODE 1 6 8 7 9 3 2 4 5 0 ! @ # $ ) ^ % * DISC SEL.
8 Preparations 1 B.BOOST DISC SKIP DVD AUX CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 CINE.EQ AV AUX 23 POWER POWER TV VCR DVD CABLE DSS RETURN OSD MENU P.CALL TUNING MUTE VOLUME A/B+100 TV SEL. RECEIVER AUTO INPUT SEL. TITLE DISC SEL. DVD CHANNEL ENTER BAND P.
9 Preparations Make connections as shown in the following pages. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
10 Preparations Connecting audio components When you connect the audio cord of the video component to the VIDEO 2/MONITOR jacks, connect the video cord (yellow RCA pin cords) of the connected component to the VIDEO 2 IN jack.
11 Preparations L VIDEO 1 R A LC L R L R B PLAY IN REC OUT PLAY IN MONITOR OUT VIDEO 1 DVD R 75 µ s AM 10kHz FM 100kHz 50 µ s AM 9kHz FM 50kHz DE- EMPHASIS CHANNEL SPACE VIDEO 2 IN VIDEO MONITOR OUT.
12 Preparations VIDEO 3 VIDEO 2 VIDEO 1 R A LC L R L R B PLAY IN PLAY IN PLAY IN REC OUT PLAY IN MONITOR OUT VIDEO 1 DVD R DVD PLAY IN FRONT CENTER DVD SURROUND VIDEO 2/MONITOR COAXIAL SUB WOOFER DVD/6CH.
13 Preparations L VIDEO 1 R A LC L R L R B PLAY IN REC OUT PLAY IN MONITOR OUT VIDEO 1 DVD R 75 µ s AM 10kHz FM 100kHz 50 µ s AM 9kHz FM 50kHz DE- EMPHASIS CHANNEL SPACE DVD VIDEO 2/MONITOR COAXIAL CD/DVD OPTICAL DIGITAL IN Digital connections COAXIAL DIGITAL OUT (AUDIO) Connect the video signal and analog audio signals to the VIDEO 2 jacks.
14 Preparations S VIDEO V L — AUDIO — R AV AUX The AV AUX jacks are convenient for connection of video components such as a camcorder or a video game.
15 Preparations Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.
16 Preparations Setting up the system Connecting the speakers 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. • Never short circuit the + and – speaker cords. • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatu- ral with ambiguous acoustic imaging.
17 Preparations L VIDEO 1 R A LC L R L R B PLAY IN REC OUT PLAY IN MONITOR OUT VIDEO 1 DVD R 75 µ s AM 10kHz FM 100kHz 50 µ s AM 9kHz FM 50kHz DE- EMPHASIS CHANNEL SPACE FRONT SPEAKERS CENTER SPEAKE.
18 Preparations Speaker placement Subwoofer Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion.
19 Preparations From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same. 1 Use the MULTI CONTROL keys to adjust the volume of the test tone output from the speaker channel to be adjusted.
20 Operations Preparing for surround sound Input level adjustment (analog sources only) If the input level of an analog source signal is too high, adjust the input level. The CLIP indicator will blink to indicate the source signal. 1 Use the INPUT SELECTOR knob to select the source which input level you want to adjust.
21 Operations Normal playback 1 Listening to a source component Use the INPUT SELECTOR knob to select the source you want to listen to. The input sources change as shown below: Selecting a source using the INPUT SELECTOR knob. Adjusting the tone You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode.
22 Operations Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. To cancel Press the MUTE key again so that the “ MUTE ” indicator goes off. • MUTE ON can also be deactivated by turning the volume control knob.
23 Operations 1 Use the INPUT SELECTOR to select the source (CD, DVD or VIDEO2) you want to record. 2 Set the cassette deck or MD recorder to record. 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode. 1 Rec mode off : The digital input record mode is switched off.
24 Operations Presetting radio stations manually • Repeat steps 1 , 2 , 3 , and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the old station will be replaced by the new one. Press the MEMORY key while receiving the station.
25 Operations Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
26 Operations DSP mode The DSP mode lets you add the atmosphere of a live concert or hall to almost any type of program source. These modes are particularly effective when used with stereo program sources, like CD, television, and FM radio.
27 Operations Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software bearing the mark.
28 Operations Ambience effects 1 DVD 6-channel playback (VR-506/517/KRF-V6050D/V5050D) Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. When you try to play a disc other than Dolby Digital such as DTS CD, no sound is produced or, noise may be heard.
29 Operations Ambience effects Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. • The adjustment item is displayed for approximately 8 seconds.
30 Remote Control The remote control supplied with this receiver (for VR-506/517/ KRF-V6050D/V5550D only) is also capable of controlling com- ponents from a variety of manufacturers once you register the appropriate setup codes into the remote control unit.
31 Remote Control Maker Setup codes SONY 101 GE/RCA 102 RCA 103, 104, 105, 106, 117 ZENITH 107, 108 MAGNAVOX 109 SHARP 110 PANASONIC 111,112, 122 SAMSUNG 109 JVC 113 HITACHI 114, 115 PIONEER 116 PROSC.
32 Remote Control Basic remote control operations for other components The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player.
33 Remote Control Basic remote control operations for other components CASSETTE deck, CD player & MD recorder operations (For VR-505/KRF-V5050D) Cassette deck operation keys RC-R0511 RC-R0511 MD recorder operation keys 1 DISC SKIP BASS BOOST AUTO PHONO/AUX CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 23 POWER DVD POWER RECEIVER MENU P.
34 Remote Control Basic remote control operations for other components RC-R0617 RC-R0615 You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, MD recorder or CD player equipped with system control operations.
35 Remote Control Basic remote control operations for other components MD recorder operation keys CD player operation keys RC-R0617 RC-R0615 RC-R0617 RC-R0615 1 B.BOOST DISC SKIP DVD PHONO CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 CINE.EQ AV AUX 23 POWER POWER TV VCR DVD CABLE DSS RETURN OSD MENU P.
36 Remote Control Basic remote control operations for other components RC-R0617 RC-R0615 1 B.BOOST DISC SKIP DVD AUX CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 CINE.EQ AV AUX 23 POWER POWER TV VCR DVD CABLE DSS RETURN OSD MENU P.CALL TUNING MUTE VOLUME A/B+100 TV SEL.
37 Remote Control Basic remote control operations for other components DVD player operation keys RC-R0617 RC-R0615 1 B.BOOST DISC SKIP DVD AUX CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 CINE.EQ AV AUX 23 POWER POWER TV VCR DVD CABLE DSS RETURN OSD MENU P.CALL TUNING MUTE VOLUME A/B+100 TV SEL.
38 Remote Control Basic remote control operations for other components Cable tuner operation keys RC-R0617 RC-R0615 DSS receiver operation keys RC-R0617 RC-R0615 1 B.BOOST DISC SKIP DVD AUX CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 CINE.EQ AV AUX 23 POWER POWER TV VCR DVD CABLE DSS RETURN OSD MENU P.
39 Additional Information In case of difficulty Tuner Cause • No antenna is connected. • The broadcast band is not set properly. • The frequency of the desired station is not tuned. • Noise due to ignition noise from an automobile. • Noise due to interference from an electric appli- ance.
40 Additional Information Remote control unit Cause • No setup codes registered at for the respective input(s). • The remote control is set to a different operation mode.
41 Additional Information Specifications Caution : Read this page carefully to ensure safe operation. Notes 1. KENWOOD follows a policy of continuous advancements in development.
42 Additional Information Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
43 Additional Information GENERAL Power consumption KRF-V6050D/V5050D ......................................................... 270 W KRF-V5550D ....................................................................... 200 W AC outlet SWITCHED .........
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Een belangrijk punt na aankoop van elk apparaat Kenwood VR-506 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood VR-506 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood VR-506 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood VR-506 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood VR-506 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood VR-506 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood VR-506 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood VR-506 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
