Gebruiksaanwijzing /service van het product UL/C-UL van de fabrikant Kenyon
Ga naar pagina of 16
INSTRUCTION MANUAL Mediterranean 2-Burner Caribbean 2-Burner Mediterranean, Caribbean & Alpine Ceramic Glass Cook Tops (240 Volt Models UL/C-UL APPROVED) KENYON P.
P LE ASE RE AD THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE INST ALLATION AND USE OF APPLIANCE . *** DO NOT DISCARD THIS MANUAL ! S A VE FOR FUTURE REFERENCE .
Mediterranean Series Cook Top PRODUCT SPECIFICATIONS Two Burner B41511 - 240V AC - one 6” (165mm) burner @ 1200 watts one 8” (200mm) burner @ 1800 watts Overall dimensions: 23-1/4” x 14-1/4” x 2-5/8” 590.6mm x 362.0mm x 66.7mm Cutout dimensions: 21-3/4” x 12-3/4” with 1/4” radius 552.
Caribbean Series Cook Top PRODUCT SPECIFICATIONS Two Burner B41602 - 240V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.5mm Cutout dimensions: 20” x 10-3/4” with 1/4” radius 508mm x 273mm with 6.
Alpine Series Cook Top PRODUCT SPECIFICATIONS Two Burner - Large B49511 - 240V AC - one 6” (165mm) burner @ 1200 watts one 8” (200mm) burner @ 1800 watts Overall dimensions: 23-1/4” x 14-1/4” x 2-5/8” 590.6mm x 362.0mm x 66.7mm Cutout dimensions: 21-3/4” x 12-3/4” with 1/4” radius 552.
INSTALLATION INSTRUCTIONS FOR KENYON CERAMIC GLASS COOK TOPS Important : Save this documentation for review by local inspector. Important: This appliance must be properly installed and grounded by a qualified technician. STEP #1 Unpacking the Cook Top Carefully unpack the cook top from its shipping container.
For future reference, please record the serial number of your cook top here: STEP #2 Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cook top.
STEP #3 Countertop Preparation Please read this section prior to making cutout for cook top. It is important to plan ahead for installation of the cook top, keeping the following dimensions in mind (please refer to Figure A).
Allow a 2” minimum clearance between the bottom of the metal pan of the cook top and any combustible surface located below, ie: the upper edge of a drawer installed below the cook top (see Fig. B on previous page). Failure to provide proper clearances and ventilation may result in a fire hazard.
5 STEP #4 Installing the Cook Top There are two mounting brackets supplied with the glass ceramic cook top. These brackets are designed to hold the cook top firmly in place.
STEP #5 Electrical Connection Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 2 for appropriate electrical requirements.
USER’S GUIDE & CARE SAFETY Read this section BEFORE operating the cook top. The following information applies to all KENYON Electric Cook Tops. • Proper Installation Be sure your appliance is properly installed and grounded by a qualified technician.
• Do not use water on grease fires. Smother fire or flame or use dry chemical or foam-type extinguisher. • Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch the heating elements on the appliance.
OPERATION READ SAFETY INSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE The cooking surface areas of your glass ceramic cook top are identified by permanent patterns in the cook top.
Knobs & Indicator Lights (continued) There are a series of lights that provide indications of burner operation and hot surfaces. These lights are located adjacent to the control knobs. When the control is in the “on” position, a red light is lit indicating which burner is on.
W ARRANTY KENYON International (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company.
Een belangrijk punt na aankoop van elk apparaat Kenyon UL/C-UL (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenyon UL/C-UL heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenyon UL/C-UL vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenyon UL/C-UL leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenyon UL/C-UL krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenyon UL/C-UL bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenyon UL/C-UL kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenyon UL/C-UL . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
