Gebruiksaanwijzing /service van het product EOSDCS 1 van de fabrikant Kodak
Ga naar pagina of 314
2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii W ARRANTY KODAK Professional DCS Digital Camera THIS WARRANTY APPLIES TO EQUIPMENT PURCHASED IN THE UNITED STATES. W arranty T ime Period Kodak warrants your camera to be free from malfunctions and defects in both materials and workmanship for six months from the date of purchase.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Limitations Warranty service will not be provided without return of the Warranty Registration card or dated proof of purchase. Please return the Warranty Registration card within 30 days of purchase.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Outside the United States In countries other than the United States, the terms of this warranty may be different.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi EASTMAN KODAK COMP ANY Software License Agreement YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE OPENING THE DISKETTE PACKAGE(S). OPENING THE DISKETTE PACKAGE(S) INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDI- TIONS.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii You must reproduce and include the copyright notice on any copy of the software. YOU MAY NOT USE, COPY OR TRANSFER THE SOFTWARE, OR ANY COPY, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. IF THE SOFTWARE PROVES DEFECTIVE, YOU (AND NOT KODAK OR YOUR DEALER) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix GENERAL You may not sublicense, assign, or transfer the license or the software, except as expressly provided in this Agreement. Any attempt otherwise to sublicense, assign, or transfer any of the rights, duties, or obligations hereunder is prohibited.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Important Safeguards and Precautions The exclamation point in an equilateral triangle is in- tended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the equipment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi and serious damage to the equipment. Use only with a stable cart, stand, bracket, or table. Cleaning — Unplug the camera from its AC battery charger/adapter and from a computer. Be certain the camera off.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii camera as the only external device attached to a PowerBook com- puter (refer to Chapter 4). Use only the SCSI cables supplied with the camera to attach the camera or other peripherals to the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii PCMCIA cards may have more restrictive operating temperature and humidity ranges. Refer to the specifications for the cards you use.) PCMCIA cards — PCMCIA cards (not supplied with the camera system) are fragile devices that can be damaged if not treated with care.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv You can connect the camera to a computer with or without a PCMCIA card in the camera. Once the camera is connected to a computer, you can .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv AC Battery Charger/Adapter — Important W arnings You should operate the equipment only from the type of power source indicated on the name plate of the AC battery charger/adapter. A line voltage outside of this range can destroy the AC battery charger/ adapter and/or the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi Electromagnetic Emissions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii Contents 1 1 1 1 1 Before You Begin 1-1 Macintosh Computer — Hardware and Software 1-2 Required Computer, Memory, Hard Disk 1-2 Compute.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii 2 2 2 2 2 Introduction 2-1 KODAK Camera Back 2-3 Features 2-4 3 3 3 3 3 Quick Start 3-1 4 4 4 4 4 Preparing the Camera and the Computer .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Choose Other Canon Camera Settings 5-6 Turning Off the Camera 5-8 Taking Pictures 5-8 Reading the Frames Remaining Indicator and the Frame.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx 6 6 6 6 6 Tutorial — Accessing Camera Images (continued) Working with Images Already on a PCMCIA Card (continued) Crop Images 6-21 Close .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi Troubleshooting, Disk Recovery, and Fragmentation 7-19 Camera Operating Configurations 7-21 Supported Configurations 7-21 Taking Pictures .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii 8 8 8 8 8 Reference — Kodak Driver Software (continued) Commands 8-6 Source Menu 8-6 Camera 8-7 Folder 8-7 Choose Folder 8-7 View Menu .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Erase 8-20 Format 8-20 Recover 8-21 Self Test 8-22 Done 8-22 Preferences Icon 8-23 Default Acquire Resolution 8-23 12-Bit Acquire 8-24 S.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv 8 8 8 8 8 Reference — Kodak Driver Software (continued) Commands (continued) Cancel 8-33 OK 8-33 Crop New Images after Shutter Release .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv 9 9 9 9 9 Appendices 9-1 Appendix A — Specifications for EOS•DCS 1, EOS•DCS 3, EOS•DCS 5 A-1 Appendix B — Glossary B-1 Appendix .
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Before You Begin Macintosh Computer — Hardware and Software The following sections list the required and optional computer hardware and software needed to run the Kodak Driver for use with Adobe Photo- shop Software on an Apple Macintosh computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-3 than 16.7 million colors). Neither the amount of data stored for each image, nor the quality of any printed output, is affected by the monitor or card in use.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Before You Begin IBM PC or Compatible Computer — Hardware and Software These sections list required and optional hardware and software needed to run the Kodak drivers for TWAIN-compliant PC applications.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-5 for the monitor in use; we recommend a 24-bit display card. A 16-bit card can display up to 32,768 colors, while a 24-bit card can display more than 16.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Before You Begin Other Optional Equipment Optional Camera Equipment Refer to the supplied “EOS-1 N Accessory Guide” for specific details of available accessories and spare parts. Electronic flash and accessories.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Introduction The EOS•DCS camera is a portable camera system that takes and stores high-resolution digital images. You can attach the camera to one of several computers and move your images from the camera to the com- puter using one of the special software drivers provided by Kodak.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 2-3 KODAK Camera Back The KODAK camera back is a sealed, one-piece unit. A single mounting screw attaches it to a specially modified Canon EOS-1 N camera body that has had its film back removed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Introduction Features The KODAK camera back incorporates the following features: Imager Tripod socket Mounting screw FRONT VIEW A KODAK charge coupled device (CCD) imager, with image data recorded as listed in the Specifications appendix.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 2-5 CARD BUSY MIC DELETE SCSI ID MIC BUTTON LCD DELETE button Card Busy light Remove/insert PCMCIA card here.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Introduction A built-in microphone records sound as “.WAV” files at “telephone quality”— 8-bits, 11 kilohertz, monaural. Software drivers to move images from the camera back to your computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Quick Start 1. Obtain and mount a lens on the camera. Canon EF lenses are not supplied with the camera system, but are available from authorized Canon camera dealers. If necessary, refer to the EOS-1 N Instructions for details on lens attachment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-3 6. EOS • DCS 1 Only: Install the Calibration File. A. Macintosh: Load the diskette with the calibration (CAL) file for your camera. Copy the calibration file (its name ends with the characters “.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Quick Start 10. Place a supported PCMCIA card into the camera. Open the door on the side of the camera, push the PCMCIA card firmly into place, and close the door. (Do not be startled by the red Card Busy light that blinks briefly, or by the slight noise.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-5 NOTES: For earlier supported versions of Photoshop, choose the driver from the A CQUIRE submenu of the F ILE menu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Quick Start 15. Move images from the camera system to the computer. With equipment off, reconnect the camera system to the computer (if needed), run your application, access the driver image window as described above.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Preparing the Camera and the Computer Load and/or update camera firmware. Format a PCMCIA card for use with the camera. IMPORTANT: We assume that you are familiar with the operation of your computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-3 Using the AC Battery Charger/ Adapter Keep the following battery considerations in mind as you use the camera. IMPORTANT : Do not attempt to remove the battery; it is not a cus- tomer serviceable part.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Preparing the Camera and the Computer Charging the Battery You should charge the battery for two hours before using the camera for the first time, and thereafter on a regular basis as needed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-5 3. Plug the other end of the power cord into a wall outlet. 4. Plug the AC battery charger/adapter into the camera; the unit plugs into the round connector at the lower left corner of the back of the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Preparing the Camera and the Computer 5. The first time the camera is used, allow the battery to charge for two hours. IMPORTANT: An LCD at the top left corner of the camera back displays a battery icon.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-7 Setting the SCSI ID on the Camera In this section you will set the SCSI identification (ID) number for the camera. Each SCSI device connected to the same computer must have a different ID number.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Preparing the Camera and the Computer 3. Turn on the camera as shown below. Power switch set to (I) Shutter release button 4. Wake the camera by lightly pressing the shutter release button.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-9 5. Locate the indented button on the back of the camera labeled “SCSI ID.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Preparing the Camera and the Computer 6. Press the SCSI ID button once with your fingertip or a blunt object; this action wakes SCSI mode. The characters “SCSI” (called the SCSI indicator), as well as a single value from 0 to 7, “PC,” and “PP” appear on the camera back LCD.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-11 7. While “SCSI” still appears on the LCD, you change the current SCSI ID by pressing the SCSI ID button repeatedly. The ID rotates through the values 0 to 7, “PC,” and “PP.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Preparing the Camera and the Computer Installing a SCSI Host Adapter (TW AIN PC Only) The camera connects to your PC at a SCSI port provided by installing one of the supported SCSI host adapter cards.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-13 Making the SCSI Connection The camera is a non-terminated SCSI device that connects to your Macintosh computer or PC with one of the included SCSI cables.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Preparing the Camera and the Computer 3. Connect the AC battery charger/adapter to the camera as described earlier in this chapter. Although this step is optional, we recommend it whenever the camera is connected to a computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-15 5. Follow the appropriate part of this step for either a Macintosh or a PC. MACINTOSH: Attach one 25-pin connector to the SCSI port on the back of the Macintosh computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Preparing the Camera and the Computer 6. Attach the appropriate end of the supplied 25-pin SCSI terminator to the other end of the SCSI cable you just attached to your computer. 25-pin Terminator BACK OF COMPUTER 7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-17 8. (Optional) Later, to disconnect the camera from the computer, shut down the computer and then power off the camera. Then disconnect the terminator from the camera and the SCSI cable from the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Preparing the Camera and the Computer A. Follow these steps if none of the connected devices are terminated or if one of the devices is terminated externally. 1. Turn off the computer, and all connected SCSI devices.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-19 B. If there is an external SCSI terminator between the end of a cable and a SCSI connector on a device, remove the terminator, and then reconnect the cable.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 Preparing the Camera and the Computer 7. Attach the supplied 25-pin terminator to the other end of the SCSI cable and then to the camera. 25-pin Conne ctor SCSI Connector EOS • DCS Camera 25-pin Terminator 8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-21 2. Place the camera in a convenient position next to the last device in the SCSI chain of devices connected to your computer. 3. Connect the AC battery charger/adapter to the camera as described earlier in this chapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Preparing the Camera and the Computer 6. Attach the other end of the SCSI cable to the SCSI connector on the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-23 III. Camera Used with a Macintosh PowerBook or a PC Laptop Follow the steps below to match your computer system, either a Macintosh PowerBook (part A) or a PC Laptop (part B).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Preparing the Camera and the Computer 1. Turn off the Macintosh PowerBook computer. IMPORTANT: Later when you connect and disconnect the Macintosh PowerBook computer and the camera on a regular basis, make sure the computer is off.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-25 B. PC (for TWAIN driver) The camera can be used with an IBM or compatible laptop computer if you use a PCMCIA-to-SCSI II adapter (such as the Adaptec SlimSCSI used with EZ-SCSI 4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Preparing the Camera and the Computer Inserting and Removing a PCMCIA Card This section describes how to insert and remove a PCMCIA card. PCMCIA cards are not supplied with the camera, but are available as optional equipment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-27 1. Be certain that the red “Card Busy” light is not blinking before you continue.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 Preparing the Camera and the Computer 2. While looking at the back of the camera, open the door on the left edge of the camera back by inserting a thumb or finger into the opening and swinging the door away from you.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-29 Insert your PCMCIA card (not supplied with the camera), by sliding it — thin edge first — into the empty slot, and pushing it firmly into place.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 Preparing the Camera and the Computer 4. Swing the door closed over the PCMCIA card. NOTE: The camera back LCD (see figure above at the start of step 3) may show “E6,” a code indicating that the PCMCIA card is not formatted.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-31 3. CAUTION : As you complete this step, the PCMCIA card is ejected from the camera; for that reason, keep your hand in front of the door opening to prevent the fragile card from falling out of the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32 Preparing the Camera and the Computer Installing the KODAK Driver In this section you will install the special software driver provided with the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-33 C. Install the software by following all instructions as they appear.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34 Preparing the Camera and the Computer B. Make a backup of the calibration diskette; you cannot obtain images from the camera without the CAL file. C. Follow the appropriate part of this step for your computer system.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-35 Accessing the Camera from the Driver Repeat the steps below each time you want to access the KODAK Driver for Adobe Photoshop software or for supported TWAIN-compliant PC applications.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36 Preparing the Camera and the Computer provides one example using the KODAK Driver with Adobe Photoshop. If you use other supported software, refer to its documentation to deter- mine if it is TWAIN-compliant, and if it is, how it provides access to TWAIN drivers.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-37 Final Steps to the Driver W indow 1. Follow the appropriate step below. MACINTOSH: Pull down the Adobe Photoshop 4.0 File menu and choose K ODAK DCS 400/EOS•DCS from the I MPORT submenu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Preparing the Camera and the Computer Updating Camera Firmware The camera incorporates nonvolatile memory that contains controls — called firmware — for most features of the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-39 1. Click the camera control icon of the driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40 Preparing the Camera and the Computer Formatting a PCMCIA Card This section describes how to format a PCMCIA card, an action you may need.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Camera and the Computer 4-41 2. IMPORTANT: As you complete this step, keep in mind that this operation will erase all existing data on the PCMCIA card. Click the F ORMAT button, and click the response you want on the confirmation box that appears.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42 Preparing the Camera and the Computer Quitting — Disconnecting the Camera from the Computer Complete these steps when you have completed your work with the camera and the computer. 1. If Photoshop or other supported application is running, quit that application now.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Using the Camera Readying the EOS • DCS Camera 1. If a formatted PCMCIA card is not in the camera, insert one now. NOTE : Refer to Chapter 4 for information on formatting, inserting, and removing PCMCIA cards.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-3 NOTE : The AC adapter supplies enough power to support operation of the camera as well as to continue charging the camera battery. Once the battery is fully charged, the AC adapter automatically switches to a slow trickle charge.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Using the Camera An oval that serves several purposes, including indicating the amount of the card filled with images. (An empty oval indicates that the PCMCIA card is empty.) LCD GRAPHICS Battery indicator Frames remaining 6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-5 Without the AC battery charger/adapter, if the indicator shows that the battery is low, recharge it or operate the camera from the AC battery charger/adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Using the Camera 4. Aperture adjustment in manual exposure mode. Press and release the exposure compensation ( + ⁄ - ) button, then turn the main dial. NOTES : Custom Function 5 can be used to reverse the shutter speed and aperture value setting methods in manual exposure mode.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-7 4. Select a film winding mode (Single or Continuous) or a Self-timer mode (2-second delay or 10-second delay) by turning the main dial after pressing the DRIVE button located inside the hinged door on the right side of the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Using the Camera T urning Off the Camera You turn off the camera by sliding the power switch to off (O). When the camera is on but not awake (the LCD on the camera back is off), the drain on the battery is very minimal as the camera system waits in a sleep state for your next action.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-9 KODAK camera back. You do not select a focusing point with the focusing point selector ( ). Instead, follow these steps: A. Tap the exposure compensation button ( + ⁄ - ).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Using the Camera Reading the Frames Remaining Indicator and the Frame Counter Two numbering systems provide different information about your pictures.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-11 Frame Counter/Image Reference Number A separate numbering system is provided by the Canon EOS-1 N camera. Its frame counter appears on the camera-top LCD. These numbers go up by one as each picture is taken.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 Using the Camera 3. Locate the indented button on the back of the camera labeled “DELETE.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-13 4. Press this DELETE button once with your fingertip or a blunt object; this action wakes delete mode. The characters “DEL” appear on the camera back LCD. 5. While “DEL” still appears on the LCD, press the DELETE button again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14 Using the Camera Recording Sound (Optional) You can record sound on the PCMCIA card via a microphone built into the camera by following these steps. 1. Turn on and wake the camera system. 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-15 and segments of the disk icon bounce up and back, serving as a level meter (similar to the levels commonly displayed on audio equipment like tape decks). The bouncing segments provide feedback, a visual indication that sound is being recorded.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 Using the Camera Operating Differences with Y our Camera There are differences between normal operation of the Canon EOS-1 N camera and its operation as part of the EOS • DCS camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Camera 5-17 Lenses behave somewhat differently with the EOS • DCS than with a conventional EOS 35mm SLR. The exact details appear in the Specifi- cations appendix. You will not be able to shoot when the camera is in One Shot AF mode if the camera cannot focus.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Accessing Camera Images card are opened into separate windows in Adobe Photoshop. Once acquired you can use all Photoshop features to edit the images and save them in the variety of file formats available in Photoshop.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-3 W orking with Images Already on a PCMCIA Card This section is a tutorial on how you might work at the computer with images you have previously taken with the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Accessing Camera Images 4. Choose K ODAK DCS 400/EOS•DCS from the I MPORT submenu of the Adobe Photoshop 4.0 F ILE menu. NOTES : For earlier supported versions of Photoshop, choose the driver from the A CQUIRE submenu of the F ILE menu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-5 Driver Image Window (Macintosh and TWAIN): V iewing/Selecting an Image from the Camera with the Driver In this section we start by assuming that you want to select a single image to acquire into Photoshop.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Accessing Camera Images 1. If it is not already selected, choose C AMERA from the S OURCE menu to work with images from a connected camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-7 3. If it is not already selected, choose P HOTO from the A CQUIRE A S menu. This specifies that, when you acquire images into Photoshop, each image will be acquired into a separate window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 Accessing Camera Images Acquiring One Image from the Camera You are now ready to acquire an image into Photoshop. Acquiring an image copies its image data from the PCMCIA card into Photoshop, where the acquired image opens into a Photoshop window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-9 Acquiring Multiple Images or a Contact Sheet In the previous section you acquired a single image into Photoshop. In this section you will acquire multiple images (or a contact sheet of those images) simultaneously.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10 Accessing Camera Images nails of the subset of selected images, as illustrated below after printing the file; however, if the setting in step 3 is P HOTO , each image is acquired into a separate Photoshop window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-11 Rotate, Rename, and Annotate Images 1. Suppose that one or more images is not displayed in the proper rotation. A. Select the image or images not shown in the proper rotation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12 Accessing Camera Images named based on the data in the text boxes. Note that the “.TIF” suffix is automatically added to the file name: do not type the period or “TIF” in the N AME area.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-13 When an image is acquired, text from both areas is also acquired, and is placed in the Photoshop caption area.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14 Accessing Camera Images Navigating Through Images As described earlier in the chapter, you can scroll through images by using the scroll bar at the right of the image area.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-15 4. Click the “previous” icon several times; the selected image changes, moving consecutively to the “previous” image with each click. 5. Click the “last” icon; the last of all of your images is selected.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16 Accessing Camera Images The screen changes, and a single enlargement of the selected image fills the image area on the screen.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-17 Color balance choices are contained in two separate features — the lighting menu and the click-balance tool — both of which are described below. Lighting can be set with either.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18 Accessing Camera Images 5. Color balance the image using either method A (lighting menu) or method B (click-balance Tool) that follows. Method A: Lighting Menu The lighting menu provides a simple, direct method of quickly applying one of several lighting choices to your image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-19 2. Move the cursor over the image, the cursor changes to a special click- balance eyedropper cursor.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20 Accessing Camera Images Applying Color Balance to Multiple Selected Images 1. If you are not in the driver image window, return there now. 2. If you are not in C ONTACT S HEET view, choose it now.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-21 changes are applied to all of the other selected images. To correct that single image without affecting others, return to C ONTACT S HEET view, select only that single image, enter Preview, and color balance the single image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22 Accessing Camera Images acquisition will be faster than with a full image, and the acquired image will be smaller than a full-size image. And, if you are not satisfied with your initial crop, you can revise or remove the cropping rectangle as desired at any time.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-23 4. Wait as the C ROP dialog box appears; note that if multiple-images were selected that they appear in a stack in the box. In this step you will set some of the options of this dialog box to crop images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24 Accessing Camera Images you know beforehand the exact output dimensions desired for the image. Make one of these choices: F REEFORM allows you to drag any edge of the selection rect- angle in any direction.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-25 you step through them, resize or reposition cropping rectangle as desired; the change affects the cropping rectangle on all selected images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26 Accessing Camera Images W orking with Images in the Studio This section is a tutorial on using the camera in a studio setting to take new images. NOTE : The earlier part of this chapter describes how you can work with images on a PCMCIA card in the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-27 4. As prompted by a message that appears in the driver image window, click the Take Picture icon (or use the shutter release to take a picture). The camera takes a picture and displays it in the image area.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28 Accessing Camera Images choose C LOSE from the Photoshop F ILE menu or quit Photoshop, the window will close without asking you if you want to save it. Therefore, be sure you save any acquired images you do not want to lose before closing their windows or quitting Photoshop.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-29 Playing Recorded Sound Files Sound files recorded with the camera are saved to the PCMCIA card and are associated with the image taken just before the sound was recorded.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-30 Accessing Camera Images Archive and Delete Images The driver provides a variety of additional features that allow you to work with image and sound files.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-31 4. Later, to work with these archive files, enter the driver, and use C HOOSE F OLDER from the S OURCE menu (Macintosh), or click the icon near the S OURCE drop-down menu (TWAIN-PC), to locate and open the folder with the archive images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-32 Accessing Camera Images Delete Files 1. Select images you want to delete. 2. Click the Delete button. IMPORTANT : When clicked, the D ELETE button deletes all selected images, including those selected images that may have temporarily scrolled out of view.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Camera Images 6-33 1. Click the D ONE button to leave the driver image window; all revisions you have made in this work session are saved. 2. (Optional) Edit and save opened acquired images in Photoshop.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 2 Reference — Camera KODAK Camera Back and Imager The KODAK camera back incorporates a charge coupled device (CCD) full-frame imager that collects light striking the imager.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-3 A self-test of camera performance is available to you through a button on the Control Panel of the software drivers. This can be helpful for field troubleshooting before you call Kodak.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 4 Reference — Camera KODAK Camera Back Controls Liquid Crystal Display (LCD) A liquid crystal display (LCD) on the KODAK camera back provides status information for the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-5 LCD CAMERA-OFF GRAPHICS Battery indicator Frames remaining Delete indicator SCSI indicator Disk indicator/ Recording .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 6 Reference — Camera Battery Indicator When the camera is awake, the battery indicator displays the amount of battery life — full, 2/3 full, and 1/3 remaining — in the battery in the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-7 Frames Remaining Indicator — KODAK Camera Back The frames remaining indicator displays the number of additional pictures that can be stored on the PCMCIA card currently in the camera system.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 8 Reference — Camera This frame counter displays the number of the picture you have just taken rather than the number of the next picture you will take. The Canon EOS-1 N frame counter is displayed beneath each image in the software driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-9 Disk Indicator The disk indicator, shown in each of its stages below, appears when you wake the camera. It indicates the amount of the available PCMCIA card filled with images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 10 Reference — Camera Control Buttons Two control buttons — DELETE and SCSI ID — are provided on the camera back. Both are recessed in the housing and are operational when pressed with a fingertip or other blunt object.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-11 DELETE Button and Delete Indicator You use the DELETE button to delete the most recent image on the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 12 Reference — Camera Several seconds after you stop deleting images, delete mode turns off; reactivate it, if needed, as described above, and press the DELETE button again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-13 The DELETE button is for emergencies, not for routine operation. As an example of its use, suppose you are beginning to shoot and realize that the PCMCIA card is full, and that you do not have another PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 14 Reference — Camera SCSI ID Button and SCSI Indicator You use the SCSI ID button to set the camera SCSI ID.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-15 To set the SCSI ID, first make sure the camera is not connected to your computer . Then turn on the camera and lightly press the shutter release button (this is not necessary if you are connected to the AC battery charger/adapter) to wake the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 16 Reference — Camera SCSI Connector (KODAK Camera Back) A single 25-pin, female, subminiature D, SCSI connector appears on the KODAK camera back. You connect the camera to your computer from this connector with one of the supplied SCSI cables.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-17 Multipurpose Connector (KODAK Camera Back) A 7-pin mini-DIN connector on the camera back serves several purposes. You plug the AC battery charger/adapter directly into this connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 18 Reference — Camera PCMCIA Cards “Standard,” removable, credit-card sized PCMCIA cards (Personal Com- puter Memory Card International Association) are used for image storage. The camera incorporates a PCMCIA-ATA Type III slot.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-19 Consult the specifications for your cards to determine if their operating limits (for temperature, humidity, etc.), are more restrictive than those for the camera, and if they are, adhere to those limits.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 20 Reference — Camera camera system. If the problem is with the PCMCIA card, you can try the steps in the next paragraph.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-21 Camera Operating Configurations You can use the camera in the following equipment configurations. IMPORTANT: Refer to Chapter 4 for specific cabling and termination details.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 22 Reference — Camera T aking Pictures While Connected to the Computer You can take pictures with the camera while it is connected to the com- puter (for example in a studio setting). The following considerations apply to this usage.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-23 Using the Camera with a PCMCIA Card With a PCMCIA card installed in the camera, the unit is portable, and can be used in the large variety of stand-alone shooting situations in which the Canon EOS-1 N can be used.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 24 Reference — Camera Battery and AC Battery Charger/ Adapter Battery Charging for Optimal Capacity IMPORTANT : Do not attempt to remove the battery; it is not a customer service- able part.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-25 AC Battery Charger/Adapter To camera AC BATTERY CHARGER/ADAPTER POWER CORD To wall outlet To AC battery charger/adapter CAUTION: Observe all cautions regarding this unit included in “AC Battery Charger/Adapter — Important Warnings” at the front of this manual.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 26 Reference — Camera You can use the supplied AC battery charger/adapter to operate the camera and to charge the battery in the KODAK camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-27 Recorded Sound The camera can record sound via a built-in microphone positioned in the camera back. This feature, implemented with a goal of simplicity and ease of use, allows you to record audio information about images or other subjects.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 28 Reference — Camera PCMCIA card where it is saved as a sound file. As a result, the card may contain an intermingling of image and sound files. The camera alone cannot play the recorded sound; instead, a computer is needed to access and play the sound files.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-29 (similar to the levels commonly displayed on audio equipment like tape decks). The bouncing segments provide feedback, a visual indication that sound is being recorded.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 30 Reference — Camera You can completely fill a PCMCIA card with only sound files; the limit is the storage capacity of the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-31 On/Off State of the Camera The camera operates in three states — off, on-and-awake, on-and-asleep.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 32 Reference — Camera No power when using the battery without the adapter or the computer. The camera is not on. Slide the camera power switch to on (I). T roubleshooting the Camera Trouble Possible Cause Suggested Solution The battery is discharged.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-33 Condensation may be present in the camera or PCMCIA card. Condensation may be present if the camera is moved from a relatively cold environment (like an air conditioned hotel room), into a warm, humid environment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 34 Reference — Camera The PCMCIA card is not formatted; “E6” appears on the camera back LCD. Format the PCMCIA card as described in Chapter 4, and try again. The battery is low. Recharge the battery, or operate from the AC battery charger/ adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-35 Trouble Possible Cause Suggested Solution Two characters, an “E” followed by a single digit (for example “E2”), appear on the camera back LCD. An error occurred on the PCMCIA card or in DRAM.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 36 Reference — Camera You are losing images from the PCMCIA card. An error occurred on the card. Disconnect the camera from the computer and the adapter and turn off the camera Reconnect and retry.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-37 The camera acts erratically, unusual or unexpected characters appear on the camera back LCD, or the LCD flickers unexpectedly. The battery is low or dead. Recharge the battery in the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 38 Reference — Camera When the camera is connected to a computer, and/or the camera is being operated with the AC battery charger/ adapter, a studio flash connected to the PC terminal will not go off, or goes off only once and then freezes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-39 Cleaning the Imager The imager is the component of the camera that records light when you take a picture. Even though it is located inside the camera, it is still possible for the imager to become dirty.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 40 Reference — Camera 2. Turn off the camera. 3. Remove the lens from the camera. 4. Turn on the camera. 5. Select the bulb mode. (Press and hold down the shooting mode selector — Mode — and rotate the main dial until “bulb” is dis- played.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-41 7. Hold the camera so that light reflects off the imager; visually inspect the imager for grease, fingerprints, lint, or other dirt. 8. Release the shutter release button.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 42 Reference — Camera and a cleaning solution. The wrist strap is used to provide protection against damaging electronic components of the camera back. IMPORTANT: Use only the cleaning materials provided with the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-43 3. Attach the strap to your hand. 4. Turn off the camera. 5. If the AC battery charger/adapter is connected, disconnect it from the camera. 6. Lay the camera on its back on a flat, steady surface.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 44 Reference — Camera 9. CAUTION: Use extreme caution as you complete this step because the Canon EOS-1 N and the KODAK camera back are connected by thin wires. Hold down the camera back with one hand while you use the other hand to lift the camera body up and place it as shown below.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-45 Wiping the Imager 1. Examine the imager visually. If there is lint on the imager (but not grease, fingerprints, or other dirt), continue at step 9; otherwise continue with the next step.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 46 Reference — Camera 7. Gently lift the camera back, and examine the imager in the light to determine if it has been cleaned successfully. 8. If the imager is still dirty, repeat steps 2 through 7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-47 3. CAUTION: As you complete this step be certain that the thin wires recede into their openings in the KODAK camera back. Hold down the camera back with one hand while you use the other hand to push the camera body into place against the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 48 Reference — Camera Using a Flash WARNING: Do not connect a non-dedicated electronic flash unit to the camera (hot shoe or PC terminal) without verification from a Canon authorized service facility that the flash unit is compatible with the camera body.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Camera 7-49 Calibration (CAL) Files — EOS • DCS 1 Only In order to use any images taken with your EOS • DCS 1 Camera, a “cali- bration” (CAL) file designed for your particular camera back must be present on your computer hard disk.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Reference — Kodak Driver Software General Features When you access the driver, you see the following window — called the driver image window — on your computer monitor. Within it is the image area which displays images, either thumbnails or a single larger image called a preview.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-3 Driver Image Window (Macintosh and TWAIN): The driver provides a variety of features that allow you to work with image and sound files on the PCMCIA card in the camera, on your computer hard disk, and in memory of the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Reference — Kodak Driver Software You can transfer selected images to your computer hard disk for archival purposes and/or for later retrieval into Photoshop. You can then delete some or all of the images on the PCMCIA card in preparation for making additional images on that card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-5 Defaults — Driver Image W indow The following default values are used for the driver image window each time you begin a work session. Once you have entered the driver image window, you can change these values as desired.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Reference — Kodak Driver Software Commands This section of the chapter describes each element of the driver image window. The letter before each command corresponds to the letters shown on the illustration at the start of this chapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-7 C AMERA Use the C AMERA option to work with images from a connected camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8 Reference — Kodak Driver Software P REVIEW displays a single large image, and T EST S HOT displays a single large image from the camera (allowing for adjustments before saving an image).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-9 to move through the subset of selected P REVIEW images to ensure that the color balancing is appropriate for all images. You move through the large format preview images from the source with the image navigation tools as described below.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Reference — Kodak Driver Software If you have selected multiple images before you choose P REVIEW , the first of the selected images is displayed, and the images appear in a stack. The navigation buttons move you through only the selected set of images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-11 button becomes the K EEP button when in T EST S HOT .) If you do not want to keep the image, take another picture — it replaces the previous image which is not saved.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Reference — Kodak Driver Software C. Photoshop Menus Two Photoshop menus — E DIT and S ELECT — are active when you are in the driver.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-13 D. A CQUIRE A S Menu The A CQUIRE A S menu choices work in concert with the A CQUIRE button, and dete.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14 Reference — Kodak Driver Software If all selected images do not fit on a single contact sheet, multiple contact sheets are created.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-15 A CQUIRE C ONTACT S HEET Dialog With C ONTACT S HEET as the selected A CQUIRE A S option, when you click the A CQUIRE button, the A CQUIRE C ONTACT S HEET dialog is displayed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Reference — Kodak Driver Software O UTPUT R ESOLUTION Specify the resolution (in inches or centimeters as set in the general preferences) you desire for the acquired contact sheets. Specify a resolu- tion to match your printer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-17 E. T ake Picture Icon Causes the camera to take a picture and display it in the driver image window. There may be a very short delay to allow the camera to focus (if supported by the camera).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Reference — Kodak Driver Software When you click the camera control icon, the following dialog box ap- pears, allowing you to perform utility functions on the attached camera or on a PCMCIA card in the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-19 L OAD C AMERA F IRMWARE Click this button to update the firmware in the attached camera. Firm- ware, the control programming for the camera, is stored in nonvolatile camera memory.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Reference — Kodak Driver Software After you download firmware, the camera needs one picture to recalibrate the imager. For this reason the first picture you take after downloading firmware may not be optimal.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-21 If you have unexplainable problems with the PCMCIA card (perhaps you are losing images, or you see an.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22 Reference — Kodak Driver Software Example 3. Suppose that you have filled the PCMCIA card with images, and erased all images by clicking E RASE or by selecting all images in the driver image window and then clicking the D ELETE button.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-23 G. Preferences Icon You set the parameters used in the driver by clicking the Preferences icon, which displays the P REFERENCES panel. Default Acquire Resolution Provides the resolution in pixels-per-inch or pixels-per-cm of an acquired image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24 Reference — Kodak Driver Software 12-B IT A CQUIRE When “on,” (an “X” appears to the left of this choice when on) provides 12-bit color support into Photoshop. The camera captures images in 12-bit color for each of the red, green, and blue planes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-25 A CQUIRED C ONTACT S HEET L AYOUT Use these settings to control the appearance of the B ACKGROUND , slide surround (S LIDE M OUNT ), and T EXT caption colors of acquired contact sheets (not the contact sheet of the driver image window).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26 Reference — Kodak Driver Software retained for images that you have archived, for images that you are about to archive in this work session, or for images you are about to acquire in this work session.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-27 dialog box. You supply a one-character number in the D IGITS field, a value from 1 to 9. You also supply a one- or two-character number in the S TARTING F ROM field, a value from 0 to 99.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28 Reference — Kodak Driver Software I. Rotate Clockwise/Counterclockwise Icons When you click one of the rotation icons, selected images are rotated 90 degrees in the direction of the arrow on the icon.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-29 After you have established a cropping rectangle for an image (whether an image on a PCMCIA card in the camera, or an archive image, or a test shot image), when the image is acquired into Photoshop, the crop rect- angle is applied to the image data.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-30 Reference — Kodak Driver Software The Crop Dialog Box You provide image cropping information with the C ROP dialog box that appears when you click the Crop icon. Stack indicates that multiple images will be cropped.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-31 M ETHOD : F REEFORM AND F IXED S IZE Two cropping methods are supported. F REEFORM is the correct choice for most cropping activity, while F IXED S IZE is appropriate when you know beforehand the exact output dimensions desired for the image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32 Reference — Kodak Driver Software After you enter values, when you click OK, a crop rectangle is centered on the image with pixel dimen.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-33 F INAL O UTPUT The data displayed by the values in the final output area provide the width, height, resolution, and file size of the cropped area of the images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34 Reference — Kodak Driver Software action for all of the selected images. You can also type a specific image number in the navigation edit ‘go to’ box in the middle of the navigation bar to display that image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-35 camera or with the selected image archive files. Changes you make in these settings are visible on the images displayed on your computer monitor. The choice you make is used for color correction by the driver when the image is acquired.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-36 Reference — Kodak Driver Software NOTE : In addition to this tool, the driver provides a lighting menu described in the last section.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-37 area where each of the red (R), green (G), and blue (B) color values displayed below the image are as high as possible, but lower than 255. After you click, you view the result of the change immediately on the image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-38 Reference — Kodak Driver Software M. Sound Menu All Sound 1 Sound 2 • • • You use this Sound menu to play sounds associated with a single selected image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-39 N. A CQUIRE Button You click the A CQUIRE button to acquire selected images or a contact sheet into P.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-40 Reference — Kodak Driver Software O. C OPY T O Button You click th IS button to copy highlighted images, and associated sound files if any, to your computer hard disk. The S OURCE can be either C AMERA or F OLDER .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-41 from the image information window, image naming data, image color balance data, image cropping data, and image rotation data. The Specifications appendix lists file sizes for these image files for your camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-42 Reference — Kodak Driver Software Q. D ONE Button You click D ONE to close the driver image window and return to Photoshop.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-43 You can type short descriptive material in the annotation area; then use the mouse or arrow keys to move through text once entered.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-44 Reference — Kodak Driver Software T . Navigation Bar The items in this area allow you to navigate through images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-45 images. For example if you are working with images consecutively numbered from 1-30, and you have selected images 5, 10, 15, 20, and 25. Suppose that you are in preview or crop, and looking at image num- ber 15.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-46 Reference — Kodak Driver Software X. RGB V alues at the Cursor Location These indicate the red (R), green (G), and blue (B) values of the pixel at the current cursor location Y .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-47 Using Photoshop “Actions” (Macintosh Only) The driver supports the Actions feature of Photoshop version 4.0 and later. There are a number of considerations to keep in mind while working with actions.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-48 Reference — Kodak Driver Software 3. Click the Select All icon. 4. Select P HOTO from the A CQUIRE A S menu. 5. Click the A CQUIRE button. 6. Click the D ONE button; you leave the driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-49 9. Stop recording the script; you see these commands. Supported Commands The driver image window supports Photoshop action recording of the following driver commands.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-50 Reference — Kodak Driver Software Enter annotation text. This records the text and the image for which it is recorded. Acquire as a P HOTO or a C ONTACT S HEET . A CQUIRE button. A CQUIRE C ONTACT S HEET records the settings from this dialog box.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-51 The driver choice does not appear on the Acquire submenu. The driver has not been installed, or has not been installed properly. Quit Photoshop, install the driver as described in Chapter 4, run Photoshop and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-52 Reference — Kodak Driver Software Trouble Possible Cause Suggested Solution An undesirable color shift has occurred in saturated colors. The image has been overexposed. Under expose for proper color saturation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-53 Trouble Possible Cause Suggested Solution The battery has become exhausted while the camera is connected to the computer; the AC battery charger/adapter is not being used.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-54 Reference — Kodak Driver Software “A camera hardware error has been found. Verify that SCSI cables are connected properly, and that the camera has a unique SCSI ID, and then try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-55 “A parity hardware error has been found in the cabling or in the camera during image transfer. Verify that SCSI cables are connected properly.” A hardware error has been detected in the cabling or in the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-56 Reference — Kodak Driver Software “A problem with the hardware has been detected. (Timeout during data phase.) Verify that SCSI cables are connected properly, and that the camera has a unique SCSI ID, and then try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-57 “A problem with the hardware has been detected. (Timeout waiting for initial bus free phase.) Verify that SCSI cables are connected properly, and that the camera has a unique SCSI ID, and then try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-58 Reference — Kodak Driver Software “Camera battery is low. To continue working, use the AC adapter.” The battery needs charging. If you are operating without the AC adapter but are in an environment where power is available, attach the adapter, wait for a short time and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-59 “Can not acquire image ‘imageid’ because ‘reason.’ ” This is a general purpose message that occurs when trying to acquire images. For example you might see this message when a calibration (CAL) file is not found for the image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-60 Reference — Kodak Driver Software “Can not load image thumbnail.” An unusual condition is detected when trying to access an image at its source. Try again; if the problem persists, you may not be able to access this image.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-61 “Can not recognize the PCMCIA card in the camera. Remove the card, reinsert it firmly, and try again. Confirm that the battery is charged. Switch to an archive folder.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-62 Reference — Kodak Driver Software “Can not recognize the PCMCIA card in the camera. Remove the card, reinsert it firmly, and try again. Confirm that the battery is charged. The card may not be formatted.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-63 “Can not save these images because the destination folder or disk is locked, or you do not have ‘write privileges’ to the folder.” A problem occurred while writing the file.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-64 Reference — Kodak Driver Software “Command failure: unable to free resource from global memory. Restart your computer and try again.” A problem has occurred with Windows. Restart your computer and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-65 “General problem with ‘Take Picture.’” An unspecified problem has occurred when you clicked the Take Picture icon. Close the driver, reopen it and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-66 Reference — Kodak Driver Software “The action is canceled. It refers to a sequential image beyond those available at the source. (The script was recorded with more images than are currently at the source.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-67 “The camera is performing another operation. Wait briefly and try again.” You have tried a command (for example Copy To), and the camera is still performing another operation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-68 Reference — Kodak Driver Software “The camera or camera back was not found. Try the following. (Continued from previous page.) Check all cables. Check for SCSI ID conflict. Check for dead battery.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-69 “The ‘Load Camera Firmware’ command failed. Refer to the ‘Messages’ section in the User’s Manual.” There may be one of a variety of problems, including loose or incorrect cables, improper SCSI configuration, and so on.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-70 Reference — Kodak Driver Software “The PCMCIA card in the camera is full. You can: Enter Test Shot and save images to a folder using the Keep button. Delete images.” The PCMCIA card in the camera is full, and additional images can not be recorded on it.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-71 “There is no PCMCIA card in the camera. You can insert a PCMCIA card now, or work without a card in Test Shot view.” You are trying to take a picture but there is no PCMCIA card in the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-72 Reference — Kodak Driver Software “TWAIN error accessing data from the source. The failure is due to an unknown cause. Try again and/or reinstall the driver.” A TWAIN-compliant KODAK Driver has not been installed or has been installed improperly.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — Kodak Driver Software 8-73 “Unable to save image modifications. The destination folder or disk may be locked, or you do not have ‘write privileges’ to the folder.” (Continued from previous page.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-74 Reference — Kodak Driver Software “You can not simultaneously crop images of different sizes. Select groups of images that all have the same dimensions, and try again.” You can not simultaneously crop multiple images from different camera types.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendices 9-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications A-1 Appendix A — Specifications EOS • DCS 1, EOS • DCS 3, EOS • DCS 5 KODAK Camera Back The following camera models are.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A- 2 Specifications EOS • DCS 3 — Width 20.5 mm x height 16.4 mm, 1268 x 1012-pixels. EOS • DCS 5 — Width 13.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications A-3 EOS • DCS 5 — Unacquired image file size: approximately 1.5 megabytes (MB) for each image. Acquired image file size: approximately 4.5 MB for each color image acquired normally at 8-bit acquire (and 9 MB when 12-Bit Acquire is on), and 1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A- 4 Specifications Timing: For all camera models, the camera is ready for the first shot within 0.25 seconds after the shutter button is depressed. Timing for subsequent images depends on the type of PCMCIA card being used, and on the camera model as below.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications A-5 Third-party, optional, PCMCIA hard disk cards, with storage capacity as indicated below for one card size: EOS • DCS 1 — A 340 megabyte PCMCIA card stores up to 53 images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A- 6 Specifications EOS • DCS 1 Lenses: Lenses behave differently with the EOS • DCS 1 from a conventional EOS 35mm SLR. Although actual aperture values and focal lengths remain the same, the effective image area with the EOS • DCS 1 is only 18.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications A-7 EOS • DCS 3 Lenses: Lenses behave differently with the EOS • DCS 3 from a conventional EOS 35mm SLR. Although actual aperture values and focal lengths remain the same, the effective image area with the EOS • DCS 3 is only 16.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A- 8 Specifications This EF lens . . . . . . performs approximately like this lens. 200 20 24 28 35 50 100 200 50 70 135 135 80 90 500 400 300 EOS • DCS 5 Lenses: Lenses behave differently with the EOS • DCS 5 from a conventional EOS 35mm SLR.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications A-9 Software Drivers Photoshop (Macintosh) driver. TWAIN (PC) driver. Other Focusing screen modified for imager size; it indicates the reduced view of the scene to match the size of the picture that will be re- corded on the imager.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A- 10 Specifications EOS • DCS 3 modified focusing screen: Frame the scene within this rectangle.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications A-11 Universal AC battery charger/adapter, 95-250 V AC, 47-63 Hz. Safety: UL, CSA, TUV. Dimensions: KODAK camera back with Canon EOS-1 N camera body attached: 8.3 in. (21.1 cm) high x 6.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary B-1 Appendix B — Glossary This section provides brief explanations of terms used in conjunction with the camera. Refer to these items individually in the Index in this manual to find additional reference material about the following terms.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Glossary Camera back. See KODAK Camera Back. Camera Control. A window displayed by the driver when you click the camera control icon of the driver image window. It incorpo- rates a variety of product features, for example format disk and recover disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary B-3 Driver image window. The window displayed by the driver in which thumbnails or previews of your images appear. The window also displays controls that allow you to manipulate images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4 Glossary PCMCIA card. “Standard,” removable credit-card sized cards that meet the Personal Computer Memory Card International Associa- tion standard, that are used with the camera for image storage.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary B-5 TWAIN driver. The software provided by Kodak as part of the camera that allows you to access the camera from your PC.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your KODAK Software Driver C-1 Appendix C — Updating Y our KODAK Software Driver This appendix provides information on obtaining and installing updated software drivers including: Directions for downloading software drivers electronically from several sources.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Updating Your KODAK Software Driver files by product, version, release date, and so on. Find and download the driver for the product you use. Via the World Wide Web at: “http://www.kodak.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your KODAK Software Driver C-3 Installing the Software Driver This section describes how to update the driver on your hard disk, and how to update the firmware in your camera using the updated driver files.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repacking Instructions D-1 Appendix D — Repacking Instructions If you are having difficulties using your camera, please contact a Kodak representative before returning your unit for service .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D- 2 Repacking Instructions 7. Place the completed Problem Report Form on the top of (inside) the shipping carton. 8. Close and seal the shipping carton with tape. 9. Ship as instructed by your Kodak representative.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Problem Report Form E-1 Appendix E — Problem Report Form Customer Return Address Name ______________________________________________________.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using an Infrared Camera F-1 Appendix F — Using an Infrared Camera This appendix provides information for customers who have purchased the infrared (IR) version of the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2 Using an Infrared Camera We recommend that you bracket to try to ensure proper exposure. Refer to the Canon EOS-1 N instruction manual for additional infor- mation about infrared photography.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical and Telephone Assistance G-1 Assistance Needed Source of Assistance You encounter difficulties with hardware, images, or product performance. Refer to the troubleshooting sections of this manual: camera (in Chapter 7), and driver (in Chapter 8).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-2 Technical and Telephone Assistance Assistance Needed Source of Assistance You are a customer outside the U.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment & Spare Parts List H-1 Removable media and lens accessory 890 02 01 Supported PCMCIA card plus a lens.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-2 Optional Equipment & Spare Parts List KODAK XLS 8650 Digital Printer (raster) Prints 300 pixels per inch, 24-bit color or eight-bit gray scale images up to 8.5 x 12-inches (21.6 x 30.5-cm) to KODAK EKTATHERM XLS print paper or transparencies.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment & Spare Parts List H-3 Quantum Battery 5 (QB5) The QB5 is a rechargeable, external power pack that extends the operating time for the camera. For information contact Quantum Instruments Inc.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-4 Optional Equipment & Spare Parts List Macintosh Computer Cables 8B5450 25-pin to 25-pin SCSI cable 8B5471 25-pin to 50-pin SCSI cable Gender Changer 966976 Macintosh SCSI gender changer for use with the Macintosh IIfx or PowerBook computers.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment & Spare Parts List H-5 Tiffen Hot Mirror Filter 1942655 5 2 m m filter 8250300 5 8 m m filter 1677103 62 mm filter User’s Manual User’s Manual. The part number appears on the last page of this manual.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 10-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 2 Index ) ) ) symbol (Sound files) 6-29, 8-38 - minus sign (Click-balance check- box) 8-37 100 MHz Pentium processor 1-4 12-Bit Acquire A-.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 10-3 Calibration (CAL) file 3-3, 4-33 to 4-34, 7-49 EOS•DCS 1 3-3 Missing 7-49 Calibration (CAL) files 6-4 Camera Access from driver 6-3 to 6-5 Control programming.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 4 Index Crop Dialog box (continuted) Remove button 6-25 Size dialog box 6-24 Top 8-32 Width 8-32 Freeform 6-23 to 6-24 Icon 6-22, 8-28 to .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 10-5 E E errors (LCD) 4-30, 7-9, 7-35, 8-21 PCMCIA card error 5-2 EF lenses. See Canon EF lenses Effective image area EOS•DCS 1 A-6 EOS•DCS 3 A-7 EOS•DCS 5 A-8 Electromagnetic emissions xvi Electrostatic discharge wrist strap 7-41, 7-42 En error codes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 6 Index I IBM PC computer 1-1, 1-4 Hardware 1-4 to 1-5 Display card 1-4 Monitor 1-4 Required 1-4 SCSI interface 1-5 Software 1-4 to 1-5 Ap.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 10-7 Manual exposure adjustments 5-5, 5-6 Manual exposure mode 7-48 Medium (Thumbnail size) 8-16 Memory IBM PC requirements 1-4 Macintos.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 8 Index Photoshop (continued) Select menu 8-4, 8-12 All 8-12 None 8-12 Version 1-3, 6-2, 6-4, 8-1 Picture.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 10-9 SCSI (continued) Host adapter 3-2, 4-11, 4-33 Installing 4-12 Termination power 4-12 ID 2-5, 3-3, 4-7 to 4-11 Laptop 4-25 ID button (KODAK camera back) 7-10, 7-14 to 7-17, A-4 ID value 7-15 Identification.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 10 Index Thumbnail 3-6 Caution with TIFF files 6-31 Defined 6-6, 7-2, B-4 Generating 7-2 Selecting 8-4 Size determined by monitor 8-4 Size.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Specifications Eastman Kodak Company (“Kodak”) reserves the right to change this information without notice.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications 9-3 Use of the accompanying software is subject to Kodak’s Software License Agreement, which contains Kodak’s limitation of liability terms.
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 EOS • DCS 1, EOS • DCS 3, EOS • DCS 5 Revised 6-97 Part No. 1H6267 Kodak and Kodak Professional are trademarks.
Een belangrijk punt na aankoop van elk apparaat Kodak EOSDCS 1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kodak EOSDCS 1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kodak EOSDCS 1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kodak EOSDCS 1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kodak EOSDCS 1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kodak EOSDCS 1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kodak EOSDCS 1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kodak EOSDCS 1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
