Gebruiksaanwijzing /service van het product D16 van de fabrikant Korg
Ga naar pagina of 24
1 E Upgrade Guide.
i T able of Contents Introduction ................................................................................................. 1 About this manual ...................................................................................................
1 Introduction This manual explains the new functions and improve- ments that have been added to the D16 in V ersion 2. Since the explanations are given in or der of the contents of the “D16 Owner ’s Manual,” you will need to read this manual in conjunction with the “D16 Owner ’s Manual.
2 T empo map creation (specification change) When you create a tempo map in the [TEMPO/ RHYTHM] “TmpMap” tab page, you can now specify the beginning and end measures of the tempo map, making it easier to manage the tempo map by mea- sures. An “Insert” button has also been added, making it easier to edit a previously-cr eated tempo map.
3 Basic operation In “2. Naming a song,” step 3 has been changed as fol- lows. 2. Naming a song 3 Change the name of the song. Use the “ ” “ ” buttons to move the cursor to the location of the character that you wish to change, and rotate the [V ALUE] dial to modify the song name.
4 Change the “T empo map” explanation in “Setting the tempo.” T empo map T empo Map switches the tempo, time signature, and rhythm pattern at the specified measur e. 1 Specify T empo Map as the tempo source. • Select the [TEMPO/RHYTHM] “SetUp” tab page.
5 Reference The symbol indicating foot switch polarity has been changed to “ ”. P1 Control: Foot switch/Control change device (pedal/MIDI) setting 1. Pol (FootSwPolarity) ......................................... [–, +] Specifies the polarity of the foot switch.
6 1. Select MIDISync Mode ............................................. [MTC Mstr , MTC Slave, Clock Mstr , Of f] Select the synchronization messages that will be trans- mitted and received fr om the MIDI IN/OUT connec- tors. MTC Mstr : The D16V2 will function as the master device for MTC 30 NDF (MIDI time code 30 non-drop frame) messages.
7 On the MTC slave D16V2, you must make sure that the [AUTOPUNCH] “AtPunch” tab page “AutoPunch” parameter and the [LOOP] “Loop” tab page “Loop” parameter are both turned “ Of f .” D8 backup data can now be restor ed into the D16V2.
8 Fade T rack and Normalize T rack have been added as edit types. EditT ype: “FadeT rack” This command creates a fade-in or fade-out in the IN – OUT region of the fade-in destination track (“Dest- T rack”) data. When this is executed, the audio data of the IN – OUT r egion will be smoothly faded in toward the level at the OUT location.
9 The time requir ed by this editing operation (i.e., before the “Completed” display appears) will take proportionally longer as the specified range ( IN – OUT ) is longer .
10 2a. Pr vw ................................................................ Y ou can preview the first two seconds of the selected W A V file. If you select a W A V file of an unsupported format, one of the following error messages will appear . SAMPLE RA TE NOT 44.
11 6 Specify the TO time location. ( → D16 p.70) 7 Select Copy . In the [TRACK] “EditT rk” tab page, set “EditT ype” to “Copy T rack.” 8 Select the clipboard as the copy source track num- ber . For “SourceT rack,” select “Clip 1.” The number indicates the number of tracks in the clipboard.
12 Expor ting to a W A V file Here’s how the IN – OUT range of tracks 1 and 2 from song 001 can be exported to a SCSI-connected DOS for- mat external drive “A:DOS” as a stereo W A V file named “Sound001.wav .” 1 Select song 001. 2 Assign the IN and OUT time locations.
13 1. SceneRead ................................................ [On, Of f] This turns scene playback on/off. On : Scenes will be played back. The mixer settings will change automatically when play- back reaches the time location at which a scene was r eg- istered.
14 recalled even after storing the scene. If the filter is enabled, you can disable recall of scene data even after storing the scene. 9. Recall ..................................................................... This recalls the settings that wer e stored in a scene.
15 P2 TmpMap: T empo map editing By specifying tempo maps you can change the tempo, time signature, and r hythm pattern while recor ding or playing a song. Changes in tempo, time signature, and r hythm can be placed only at the beginning of each measure.
16 Refer to the D16 Owner ’s Manual for details on 1–4. 5. Level ................................ [99 Level, 8 Level, 1 Level] Specifies the undo level. The data will be saved for the specified number of previously-executed operations. Y ou can select the undo level from 99, 8, or 1 opera- tions.
17 Part of the operation of the [FF] and [REW] keys has been changed. These keys perform recor der operations such as play- back and recor ding. Refer to the D16 Owner ’s Manual for details on 4–6. 1. [FF] key When stopped or playing, this key moves forward in time (fast-forward).
18 This section explains how the D16V2 manages disk capacity . For explanatory purposes, we will assume that you have recor ded a song with the following structure. It is not necessary that the Optimize T rack opera- tion explained here be used fr equently .
19 Example 3 Suppose that you recor ded A and B on track 1 as the first take. Then you overwrote the Intr o, A ’, B’, and Solo as take 2. In this case, the take 1 data for A and B will remain underlying A ’ and B’ of track 1.
20 4 Begin recording. Press the [PLA Y] key of the D16V2 to begin play- back, and the external MIDI sequencer will begin recor ding in synchronization.
21 MIDI implementation chart Consult your local Korg distributor for mor e information on MIDI IMPLEMENT A TION. Variable Range MIDI Implementation Chart Basic Channel Default Changed Aftertouch Pitch.
KORG INC. 15 - 12, Shimotakaido 1 - chome, Suginami-ku, Tokyo, Japan. 2000 KORG INC. 1208 CTH Printed in Japan NOTICE KORG products are manufactured under strict specifications and voltages required by each country. These products are warranted by the KORG distributor only in each country.
Een belangrijk punt na aankoop van elk apparaat Korg D16 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Korg D16 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Korg D16 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Korg D16 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Korg D16 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Korg D16 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Korg D16 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Korg D16 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
