Gebruiksaanwijzing /service van het product FS-1900 van de fabrikant Kyocera
Ga naar pagina of 60
QCP 8 00/1900 U SER G UI DE Kyocera Wireless Corp. 10300 Campus Point Drive http://www.kyocera-wireless.com 80-B667 5 -1 EN , Rev. -.
This manual is based on the production version of the QCP 800 and QCP 1900 phone. Software changes may have occurred after this printing. QUALCOMM reserves the right to make changes in technical and product specifications without prior notice.
C ONTENTS 3 Introduction ............................................................5 Highlights ............................................................5 Important Information........................................6 Getting Started ............
4 Menu Feature....................................................... 32 Main Menu ........................................................32 Menu Access Method ........................................32 Shortcut Menu Access Method ...................
5 Highlights Congratulations on your purchase of the QCP 800 or QCP 1900 phone. It is an easy-to-use, versatile, and dependable phone which provides many unique features including: • Large, easy-to-.
6 Important Informati on Caution Any changes or modifications not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment. W arning Only use the batteries, antennas, and chargers provided by QUALCOMM.
7 This section includes drawings of the importa nt phone parts a nd instructions on getting your phone powered up and ready to use. Sliding Earpiece The earpiece moves up and down. It must be up to use any of the phone’s features including making calls.
8 Front View of the Phone.
9 Front View Description 1 Red Light lights when power key is pressed and when there are incoming calls and messages. 2 Volume/Scroll let you adjust the volume and scroll Keys through the menus. 3 Lock Icon indicates that the keypad is locked because the earpiece is down.
10 Display Indicators Display indicators are located at the top of the display. Different indicators appear based on the phone’s operating mode. Digital Indicates that you are Indicator receiving a digital signal. Signal Indicates current signal strength.
11 Using the Batter y The phone comes with a rechargeable battery pack. The battery pack is shipped with approximately 50% capacity so you can use it immediately after purchasing the phone. Remember to charge the battery as soon as possible in order to maximize the talk time and standby time.
12 4. Replace the back cover by sliding it up toward the battery release latch. Removing the Batter y 1. Turn the power off; Otherwise, you may lose stored numbers and messages. 2. Press down at the battery release latch and simultaneously slide the back cover down and out.
13 T urning the Phone On and Off T urning On Make sure that the charged battery pack has been installed in the back of the phone or that you have external power (using the cigarette lighter adaptor or car kit). 1. Raise the earpiece. 2. Press for a few seconds until the red light at the top of the earpiece is lit.
14 Antenna Raise the antenna for best voice quality..
15 Charging the Battery The battery charge level is shown at the top right of the display. When the battery charge level becomes low, the low battery sensor will alert you by displaying the screen icon and sounding an audible tone. If the battery level becomes too low, the phone will switch off and any function in progress will not be saved.
16 Function Keys The following keys perform these functions when pressed during most procedures: Clears characters from the screen. Press once to erase one digit or character. Press and hold to erase all digits. When in a menu, press once to go back one level and press and hold to go back to the standby display.
17 Making a Call First, check that your phone is on. The display indicators should be visible on the screen. 1. Raise the earpiece. 2. Enter the phone number. 3. Press . If the phone is locked, the number is restricted, or there is another problem, you will see a help message.
18 Receiving Calls Your phone must be on to receive calls. The earpiece may be up or down. If the earpiece is down: Raise the earpiece. Or if the earpiece is already up: Press any key (except or the volume keys) to answer. To disconnect the call: Press or lower the earpiece.
19 Redialing Calls Redialing Last Outgoing Number 1. Press to redial the last outgoing call. Redial Last T en Calls You can redial any of your last ten calls through the call history list.
20 Saving and Editing Emerge ncy Numbers 1. Press under [MENU]. 2. Press for Security menu. 3. Enter the lock code. The lock code is typically set to either 0000 or 1234 as a default. 4. Press for Emergency #. 5. Press under [EDIT] to make changes to the first emergency number.
21 Power Save Mode The power save mode feature will automatically turn on if the phone has not been able to acquire any systems after 15 minutes of searching. While this feature is active, the phone’s battery charge is conserved. The phone will automatically recheck for service periodically.
22 The T wo Phone Book T ypes You should be familiar with the basic functions of the phone before using the phone book. There are two types of phone books: primary phone book memory and recent call history list.
23 • While viewing a call history entry, press to show additional information available such as the time stamp. Savi ng Num bers to Y ou r Pri mary Phon e B ook Memory locations 1 to 9 should be used for one- touch dial or most commonly used phone numbers.
24 5. Press under [OK] to store the number in the first available storage location. or Enter a specific, two digit location number. 6. Press under [OK] to save the number. or Press under [NEXT] and then under [OK] to save the number as secret. (Secret numbers do not display on the screen.
25 3. Press under [VIEW] to see what is in that memory location. 4. Press under [ERASE] or [EDIT] or press to call. Retrieving One Entr y by Memory Location Nu mber 1. Press under [BOOK]. 2. Enter the two digit memory location number. You will then see what is in that memory location.
26 Retrieving Recent Call Histor y 1. Press under [BOOK]. 2. Press under [CALLS]. 3. Press or to scroll through the last ten calls. 4. Press to place a call. or Press under [VIEW] to see specifics of the call. 5. Press under [SAVE] to save the number to a memory location.
27 Changing Y our Phone Book Erasing a Stored Memor y 1. Press under [BOOK]. Recall and view the memory location. 2. Press under [ERASE]. This will erase the name and number from the memory location leaving it free for a future entry. 3. Press under [OK].
28 Dialing Numbers from Y our Phone Book You can make a call using any memory location either by speed dialing from the list or by pressing while viewing the full contents of the memory location. Speed Dialing You can quickly dial numbers that are saved in your phone’s phone book.
29 Dialing from a Memor y List 1. Press under [BOOK]. 2. Press or to go to the memory location you want. 3. Press . Dialing from within a Memor y Location While viewing any memory location, press .
30 or Press for TimePause. 4. Enter additional numbers (i.e., pin number, credit card number). 5. Press under [SAVE]. Note You can press for Hyphens. Hyphens are used for appearance only; the phone dials the number without any delays.
31 Case Changing During Name Entry When entering a name, you can use both upper and lower case letters. 1. Press under [A->a] to change case. 2. Enter letters. “Prepending” a Stored Number “Prepend” is used if you are out of your home system and need to add the area code to an existing phone book number.
32 M ENU F EA TURE Main Menu This section describes the various menu items. An arrow to the right of the title indicates if there is more information before ( ↑ ) or after ( ↓ ) that particular number. The main menu looks like the following: Menus allow you to check or change the phone’s various features and settings.
33 5. Press under [NEXT]. or Press or to cycle through the possible settings. A check mark indicates the current option selection. 6. Press under [OK] to save the setting. 7. Press to cancel without saving. Shortcut Menu Access Method Each menu feature can also be quickly accessed by pressing under [MENU] and the numbers on the desired menu screen.
34 2 Key Beep Adjust the key beep volume (the sound the phone makes when the keys are pressed with the or keys or volume keys). Possible settings: silent, low, M-, M+, high. 3 Earpiece Adjust the earpiece volume with the , keys or volume keys. You can also adjust this during a call by pressing only the volume keys.
35 4 All Calls Display the total number of calls and time (minutes and seconds) including calls made while in the home system and while roaming. This is NOT resettable. 3 Security You must enter the lock code to see what is in the security menu. Typical default values are either the last 4 digits of your phone number or 0000.
36 4 Emergency# Enter three emergency numbers. You can call these numbers and 911 even when the phone is locked or restricted. If dialing the number, it must exactly match one of these programmed numbers for it to override the lock and restriction settings.
37 5 Key Beep Set key beep length and touch tone playback speed. Possible settings: “long,” “normal.” 6 One-touch Enable/disable one-touch phone book memory dialing. Possible settings: “enable,” “disable.” 7 Privacy Set the voice privacy feature for CDMA calls.
38 “On when earpiece up” causes the backlight to turn on (and remain on) only when the earpiece is up. “Always on” means that the backlight is on whether the earpiece is up or down. Choosing “always on” significantly increases battery drain.
39 6 Alerts 1 Fade Set an alert to inform you when you have lost a call or lose service. Possible settings: “on,” “off.” 2 Minute Set minute minder to beep every 10 seconds before the minute while in a call. 3 Service Set an alert to beep when a network service parameter changes.
40 This feature allows your phone to receive messages when it is turned on. A single key, , allows you to access your messages while a four line display provides for easy viewing. While reading a message, you can return a call to the callback number provided in the message simply by pressing twice.
41 Voice Mail indicates the number of new Notification voice mail messages that your voice mailbox has. You must call your voice mail number to listen to these messages.
42 Viewing Pages and Mes sag es These messages may consist of a time stamp, a callback number, a name (if the callback number matches a phone number stored in a memory location), and text. They are accessed as text type messages as shown below. Reading New Messages 1.
43 Note When there are no new messages, the phone will display a list of previous messages. If the callback number has not been previously stored into one of the phone’s memory locations, you can do so by pressing under [SAVE]. If a name appears with the callback number, the number is already stored in a phone memory location.
44 5. While viewing a message or with the arrow pointing to the desired message, you can press to place a call to the callback number provided in the message. After you see the callback number on the display, press again to place the call. 6. Press under [QUIT].
45 or Press under [ERASE] to erase the message and turn the icon off. Usually, this is not required because the network will command the phone to automatically turn the icon off when you have no new messages. Low Memory Warn ing The phone will alert you when the amount of available message memory is less than 25%.
46 You can purchase a number of accessories for your QCP 800 or QCP 1900 phone, including batteries, chargers, and a hands-free car kit. For our full line of accessories, visit our Accessories Store at ■ www.
47 Background The hand-held portable personal communication service telephone is one of the most exciting and innovative electronic products ever developed. With it you can stay in contact with your office, your home, emergency services etc. Your personal communication service telephone is a radio transmitter and receiver.
48 In March 1993, The U.S. Federal Communications Commission (FCC) proposed the adoption of this updated standard. The design of the QCP 800/QCP 1900 phone complies with this updated standard.
49 Caring for the Battery For best battery performance, follow these guidelines: • Only use QUALCOMM battery packs, model number TABAT0001, and QUALCOMM chargers, model numbers TATVL0001 or TADTC0002. Do not use any other battery pack or charger. QUALCOMM’s chargers are designed to maximize the battery life performance.
50 Driving Safety Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember, safety comes first. Check the laws and regulations on the use of PCS phones in the areas where you drive. Always obey them. When using the phone in the car: • Give full attention to driving.
51 RF energy may affect improperly installed or inadequately shielded electronic operating and entertainment systems in motor vehicles. Check with the manufacturer or its representative to determine if these systems are adequately shielded from external RF energy.
52 Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.
53 Y our Service Provider For questions about your phone and phone service, contact your service provider. Your service provider’s customer support department can answer questions about your phone, phone bill, call coverage area, and specific features (such as call forwarding or voice mail) available to you.
54 Before requesting support, please try to reproduce and isolate the problem. When you contact the Customer Care Center, be ready to provide the following information: ■ The name of your service pr.
55 A AC adaptor 15 accessories 5, 48, 52 aircraft 51 alerts 39 fade 39 minute 39 service 39 setting 39 answering a c all 7, 9, 18, 36, 50 Antenna 9, 14 antenna 6, 20, 48, 51 Auto NAM 39 automatic answ.
56 use 1 1 best performance 20 , 48 blasting a reas 52 C call history 19, 22, 26, 31, 36 call info 34 call waiting 9, 18 calls credit card 29 dialing 28, 29, 36 ending 9 incoming 9, 18, 22, 35 making .
57 driving safety 5 0 E earpiece 5, 7, 9, 13, 17, 18, 19, 21, 33, 34, 36, 37, 41 editing 30 memory 27 numbers 20 emergency numbers 19, 20, 35, 36 END key 9 ending a call 9 entering a number 17, 23, 24.
58 L last ten nu mbers di aled 19, 26 lock code 35 low battery 15 M manual pauses 29 memory clearing 27 editing 27 effect 15 locations 5, 22, 25, 26, 28, 31 retrieving 24 storage 4 0 menu item descrip.
59 P pages 10, 40 pause dialing 29 performance tips 48 phone book 22 advanced features 29 dialing from 28, 37 editing 27 retrieving from 24 saving numbers to 23 phone number viewing your own 17 power .
60 scratch pad 22, 36 scroll through messages 44 through stored names 25 through stored numbers 26 scroll keys 9 searching for names 25 for numbers 24, 25, 26 secret numbers 24, 31 signal strength 10,.
Een belangrijk punt na aankoop van elk apparaat Kyocera FS-1900 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kyocera FS-1900 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kyocera FS-1900 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kyocera FS-1900 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kyocera FS-1900 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kyocera FS-1900 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kyocera FS-1900 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kyocera FS-1900 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
