Gebruiksaanwijzing /service van het product WS-9035TWC van de fabrikant La Crosse Technology
Ga naar pagina of 19
WS-9035TWC Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipm ent 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default S.
3 INVENTORY OF CONTENTS 1. The WS-9035U weather station (Figure 1). 2. One TX8U remote tem perature/hum idity sensor (Figure 2). 3. One TX15U wind speed sensor (Figure 3). 4. Mounting hardware 5. Instruction m anual and warranty card. ADDITIONAL EQUIPMENT (not included) 1.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station, rem ote tem perature/humi dity sensor and wind speed sensor 3 to 5 feet apart . 2. Insert the telephone plug (RJ-11) from the wind speed sensor into the receptacle on the remote tem perature/humidity sensor.
5 1. Remove the battery cover. To do this, insert a solid object in the space provided at the lower-central position of the battery cover, then push up and pul l out on the battery cover. 2. Observe the correct polarity, and install 3 AA b a tteries. 3.
6 III. SETTING THE LCD CONTRAST 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e TIME LCD and the number setting will flash . Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.
7 2. “LCD” will show in th e TIME LCD and the number setting will flash . 3. Press and release the SET button three times. 4. “RCC” will appear in the DA TE LCD and “ON” or “OFF” will flash in the TIME LCD. 5. Press and release the ALM/+ button to select radi o-controlled ti me on or off.
8 IX. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will al so set the date and day. The recep tion of the signal will override any programm ed date and day. 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e TIME LCD and the number setting will flash .
9 4. Either “1”, “2” or “3” w ill flash in the TIME LCD and the forecast icon and tendency arrows will flash in the FORECAST LCD. 5. Press and release the ALM/+ button to select the forecast sensitivity 6. Press and release the SET button to confirm the forecast sens itivity and com plete the programming.
10 Sunny —indicates that the weather is exp ected to improve (not that the weather w ill b e sunny). Sun with Clouds —indicates that the weather is expected to b e fair (not that the weather will be sun ny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er w ill be rainy).
11 2. Press and release the OUT/MIN button again (once while “MAX” is still d isplayed, twice otherwise). “MIN” appears to the right of the outdoor tem perature, indicati ng that the mi nimum t emperature and the time and date of occurrence are displayed.
12 1. Press and hold the SET button for 5 seconds. 2. The record will now b e reset and show the current time in the TIME LCD an d dew point reading in th e OUTDOOR LCD. To return to the outdoor tem perature/hum idity viewing m ode: 1. Press and hold the OUT/MIN but ton for 5 seconds.
13 Wind Speed Beaufort Number or Force mph km/hr knots Description Effects Land / Sea 0 <1 <1 <1 Calm Still, calm air, smoke will rise vertically . Water is mirror-like. 1 1-3 mph 1-5 kph 1-3 knots Light Air Rising smoke drifts, wind vane is inactive.
14 9 47-54 mph 75-88 kph 41-47 knots Strong Gale Slight damage occurs to buildings, shingles are blown off of roofs. High waves (6 meters), rolling seas, dense foam, Blowing spray reduces visibility. 10 55-63 mph 89-102 kph 48-55 knots Whole Gale or Storm Trees are broken or uprooted, building damage is considerable.
15 MOUNTING Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme and sudde n changes in temperature w ill d.
16 II. THE REMOTE WIND SPEED SENSOR The remote wind speed sensor can be m ounted two ways: • With the use o f screws • Using nylon straps A. MOUNTING WITH SCREWS 1) Unlock the mounti ng bracket from the rem ote wind speed sensor leaving t he wire going through the bracket.
17 5) Place the remote temperature/hum idity sensor and indoor weather st ation in position so the stra ight-line signal is not passing through more than t wo or three walls.
18 SPECIFICATIONS Weather data measuring range: Indoor: 14.2 ° F to 139.8 ° F with 0.1 ° F resolution (0 ° C to 59.9 ° C w ith 0.1 ° C resolution) “OFL” displayed if out side this range Outdoor and dew point: -21.8 ° F to 157.8 ° F with 0.
19 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this weathe r stat ion. Contact La Crosse Technology i mmedi ately upon discovery of any defects covered by t his warranty. Before sending the W eather Station in for repairs, contact La Crosse Tech nology.
Een belangrijk punt na aankoop van elk apparaat La Crosse Technology WS-9035TWC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen La Crosse Technology WS-9035TWC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens La Crosse Technology WS-9035TWC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding La Crosse Technology WS-9035TWC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over La Crosse Technology WS-9035TWC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van La Crosse Technology WS-9035TWC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de La Crosse Technology WS-9035TWC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met La Crosse Technology WS-9035TWC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
