Gebruiksaanwijzing /service van het product 110309 7084282 - 01 van de fabrikant Liebherr
Ga naar pagina of 18
Operating and installation instructions Combined fridge-freezer with BioFresh compartment for integrated use, door-on-door 110309 7084282 - 01 ICB/ICBP/ICBN/SICBN .
Contents 1 Appliance at a glance ............................................ 2 1.1 Range of appliance use ............................................ 2 1.2 Conformity ................................................................ 2 1.3 Description of appliance and equipment .
1.3 Description of appliance and equip- ment Fig. 1 (1) Operating and control el- ements (11) DrySafe (2) Butter and cheese com- partment (12) HydroSafe (3) Fan (13) Type plate (4) Shelf, relocatable .
- Do not reach into the soft stop mechanism. Fingers may be trapped when the door is closed. Please observe the specific information in the other sec- tions: DANGER identifies a situation involving direct danger which, if not obviated, may re- sult in death or severe bodily injury.
4.1.2 To change the hinges Fig. 4 u Lift off the covers Fig. 4 (5,6,7,8) forwards using a flat-blade screwdriver. u Loosen the top and bottom screws Fig. 4 (9) on the appliance body, without removing them. u Pull the doors outwards and detach them. u Transfer the screws Fig.
Fig. 6 Make sure the following tools are on hand: q Cordless screwdriver Torx®15, 20, 25 q Spanner 13, Spirit level The intermediate base and side wall of the kitchen unit have to be at right angles to one another. Align the kitchen unit using a spirit level and angle.
4.3.1 Installing the appliance Fig. 8 u Detach the connecting cable from the rear of the appli- ance. Remove the cable holder otherwise there will be vibratory noise. u Lay the connecting cable with the help of string in such a way that the appliance can be easily connected following installation.
u Vertically align the appliance by means of the adjustable- height feet Fig. 8 (25) , using the accompanying open-ended spanner Fig. 8 (26) . w The appliance is now correctly positioned in depth. The dis- tance from the front edge of the side wall of the unit to the appliance body is 42 mmall the way round.
Fig. 24 u To align the unit door in depth Z : Undo top screws Fig. 24 (36) , bottom hexagon head screws Fig. 24 (35) with ring spanner Fig. 24 (37) provided, then shift the door. u Do not allow the knobs and sealing lips to abut - vital for proper function! u Allow an air gap of 2 mm between the unit door and the body of the unit.
u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because other- wise there will be vibratory noise! After installation: u Remove the protective film from the decorative trims and drawer fronts. u Remove all transit supports.
u To switch off: Using the Up setting button, freezer compartment Fig. 2 (5) or Down setting button, freezer compartment Fig. 2 (4) , select c0 . u To confirm: press SuperFrost button Fig. 2 (2) . w When the child lock symbol Fig. 2 (8) shines, the child lock is activated.
5.6.4 Relocating the shelves The shelves have stops preventing them from being unintention- ally pulled out. u Insert shelf with the raised edge pointing upwards at the back. w The food does not freeze onto the rear wall. 5.6.5 Using the sectioned shelf Fig.
Standard values for storage time at high humidity Mushrooms up to 7 days Radishes up to 10 days Brussels sprouts up to 20 days Asparagus up to 18 days Spinach up to 13 days Savoy cabbage up to 20 days.
5.8.3 Setting the temperature in the freezer com- partment The appliance is pre-set for normal operation. The temperature can be set between -16 °C and -26 °C / Australia model -14 °C and -26 °C, the recommended temperature is -18 °C.* u To set the temperature higher: press Up button, freezer com- partment Fig.
u Store freezer bags or containers in a drawer. u To thaw the items, spead them out loosely again. 5.8.10 Cold storage accumulators The cold storage accumulators prevent the temperature from ris- ing too fast in the event of power failure.
u Pay attention that the defrost water does not run into the kitch- en unit. * u If necessary, pick up defrost water several times, using a sponge or cloth.* u Clean the appliance (see 6.3) and rub dry.* 6.2 Defrosting with NoFrost* The NoFrost system automatically defrosts the appliance.
u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse. 7 Malfunction Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs dur- ing operation, check whether it is due to a handling error.
8 Decommissioning 8.1 Switching off the appliance Note u To switch off the entire appliance it is necessary only to switch off the freezer compartment. 8.1.1 Switching off the freezer compartment u Press On/Off button, freezer compartment Fig. 2 (3) for about 2 s.
Een belangrijk punt na aankoop van elk apparaat Liebherr 110309 7084282 - 01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Liebherr 110309 7084282 - 01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Liebherr 110309 7084282 - 01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Liebherr 110309 7084282 - 01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Liebherr 110309 7084282 - 01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Liebherr 110309 7084282 - 01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Liebherr 110309 7084282 - 01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Liebherr 110309 7084282 - 01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
