Gebruiksaanwijzing /service van het product 8352100 REV. B van de fabrikant Life Fitness
Ga naar pagina of 26
G7 CABLE MOTION ™ GYM SYSTEM A SSEMBL Y INSTRUCTIONS G7-002 / CLASS H / 10/14/08 / 8352100 REV . B.
2 T ABLE OF CONTENTS Safety S tatement . . . . . . . . . . . . . . . .2 Required Hardware . . . . . . . . . . . . . . . .8 G7 W arning Labels . . . . . . . . . . . . . . .4 Assembly Instructions . . . . . . . . . . . . . .10 Gym Dimensions. . . . . . .
3 INSPECTION 1. DO NOT use or permit use of any equipment that is damaged and or has worn or broken part s. For all LIFE FITNESS equipment use only replacement part s supplied by LIFE FITNESS. 2. Cables and Belts pose an extreme liability if used when frayed.
4 G7 W ARNING LABELS NOTE: Lock the weight stack when not using the gym. Make sure all the weight plates are resting on the plate below with no gap in between. Insert the weight selector pin in the tab underneath the weight st ack. The weight selector pin should be inserted until the knob touches the metal t ab.
5 GYM DIMENSIONS Weight: 720 lbs Resistance Ratio: 1:2 Weight S tack: 160 lbs.
6 G7 LIVE AREA 12” 12” 1 0’ 18’-8” NOTE: The live area shows the extent of the G7 gym. It does not include the user ..
7 COMPONENTS LIST ITEM NO. QTY . DESCRIPTION 1 1 LEFT TOWER 2 1 TOP BRACKET TUBE 3 1 MIDDLE BRACKET TUBE 4 1 BOTTOM BRACKET TUBE 5 1 LEFT SLIDE TUBE (WITH ROLLER CARRIAGE) ASSEMBL Y 6 1 RIGHT U BRACKE.
8 COMPONENTS LIST HARDW ARE ITEM NO. QTY . DESCRIPTION 43 32 M10 X 20MM SCREW 44 58 M10 W ASHER 45 20 M5 HEX SCREW 46 20 M6 W ASHER 47 4 M10 X 55MM SCREW 48 2 M10 X 45MM SCREW 49 13 M10 HEX NYLOCK NUT.
9 HARDW ARE: M10 X 50MM HEX TENSION SCREW (#55) M10 HEX NYLOCK NUT (#49) M10 SOCKET NUT (#51) M10 W ASHER (#44) M10.5 W ASHER (#58) M10 X 20MM SCREW (#43) M5 HEX SCREW (#45) M5 SHOULDER SCREW (#56) M6.
10 1 44 43 44 43 2 3 11 4 44 43 44 43 1 11 A B NOTE: T wo person assembly is recommended. STEP 1: Use the following hardware contained in Blister Pack (7-1): M10 x 20mm SCREW (Qty . 24) M10 W ASHER (Qty . 24) Make sure the LEFT T OWER (1) and the RIGHT TOWER (1 1) are positioned correctly prior to assembly .
11 12 50 44 44 49 1 11 44 50 STEP 2: Use the following hardware contained in Blister Pack (7-1): M10 x 70mm SCREW (Qty . 4) M10 W ASHER (Qty . 8) M10 HEX NYLOCK NUT (Qty .
12 STEP 3: Use the following hardware contained in Blister Pack (7-2): M10 x 45mm SCREW (Qty . 2) M10 W ASHER (Qty . 8) M10 HEX NYLOCK NUT (Qty . 4) M10 x 55mm SCREW (Qty . 2) Slide the top of the LEFT SLIDE TUBE ASSEMBL Y (5) over the UPPER BRACKET (C) on the LEFT T OWER (1).
13 STEP 4: Use the following hardware contained in Blister Pack (7-2): M5 SHOULDER SCREW (Qty . 32) M5 HEX SCREW (Qty . 8) M6 W ASHER (Qty .
14 55 15 54 18 17 G 20 16 11 19 26 59 STEP 5: Use the following hardware contained in Blister Pack (7-3): M10 x 50mm HEX TENSION SCREW (Qty . 4) GUIDE ROD RET AINER (Qty . 4) RET AINER RING (Qty . 4) NOTE: INST ALL FROM THE INSIDE OF THE UNIT .
15 STEP 6: Uncoil the cables to remove all twists. Remove the (UPPER) PULLEYS (13) on the RIGHT T OWER (1 1) and LEFT TOWER (1) by removing the M10 x 50mm SCREW (52), PULLEY RET AINER (53), M10 SOCKET HEAD NUT (51), and P ARTIAL PULLEY COVERS (14).
16 STEP 7: Use the following hardware contained in Blister Packs (7-3), (7-4) and (7-5): M10 W ASHER (Qty . 4) M10 HEX NYLOCK NUT (Qty . 2) M10 x 45mm SCREW (Qty . 2) M10 SOCKET HEAD NUT (Qty . 2) M10 x 50mm SCREW (Qty . 2) PULLEY RET AINER (Qty .
Slide Mechanism to insert or Exchange Handles Cable K M J L K I 17 STEP 8: Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (M) from the QUICK CONNECT COU- PLER (I). Carefully remove the QUICK CONNECT SPRING (L), the QUICK CONNECT SLEEVE (K) and the QUICK CONNECT HOUSING (J).
18 STEP 9: Make adjustments to the HEAD PLA TE PULLEY (19) and the threaded cable end to adjust cable length and to ensure the cable is taut. If the threaded cable end is completely threaded into the LEFT ROLLER CARRIAGE (28) and there is still some slack in the CABLE (21), remove the pulley from the HEAD PLA TE PULLEY (19).
19 22 44 43 43 44 1 STEP 10: Use the following hardware contained in Blister Pack (7-4): M10 x 20mm SCREW (Qty . 8) M10 W ASHER (Qty . 8) Install one FOOT EXTENSION (22) to the bottom of the LEFT T OWER (1) using four M10 x 20mm SCREWS (43) and four M10 W ASHERS (44).
20 11 3 25 46 45 58 57 24 50 44 44 49 3 25 STEP 1 1: Use the following hardware contained in Blister Pack (7-6): M5 HEX SCREW (Qty . 12) M6 W ASHER (Qty . 12) M10 x 16mm SCREW (Qty . 12) M10.5 W ASHER (Qty . 12) M10 x 70mm SCREW (Qty .
21 STEP 12: Adjust the rollers if the ROLLER CARRIAGE (28) rolls up and down the tube with dif ficulty , or if it seems to sloppy . Unscrew the cable end from the roller carriage housing. Remove the SCREWS (N) that hold the two PLASTIC COVERS (O) together .
22 39 31 32 36 35 STEP 13: The G7 comes with the following accessories: THIGH STRAP (31), FOOT STRAP (32), HANDLES (35), SNAP LINKS (36), LONG BAR (41), and EXERCISE BALL (39).
23 STEP 14: Use the FRONT HANDLE (Q) to tilt the bench. S teer the bench to align with the U BRACKETS (R). Insert one PIN (S) into each bracket so the bench is restrained.
24 MAINTENANCE Please note: * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your Life Fitness cus- tomer service representative at (800) 351-3737. * Inspect equipment before each use.
25 LIMITED W ARRANTY Life Fitness® G7 Cable Motion™ Gym System Life Fitness extends the following LIMITED W ARRANTY to the original owner (proof of purchase required, keep your receipt with this manual) of the Life Fitness product. The W arranty terms apply to IN HOME and LIGHT INSTITUTIONAL USE ONL Y .
C ORPORA TE H EADQUARTERS 5100 North River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • F AX: 847.288.3703 800.735.3867 (T oll-free within U.S.A., Canada) I NTERNA TIONAL O FFICES G7-002 Rev A 10/08 A MERICA ’ S North America Life Fitness Inc.
Een belangrijk punt na aankoop van elk apparaat Life Fitness 8352100 REV. B (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Life Fitness 8352100 REV. B heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Life Fitness 8352100 REV. B vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Life Fitness 8352100 REV. B leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Life Fitness 8352100 REV. B krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Life Fitness 8352100 REV. B bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Life Fitness 8352100 REV. B kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Life Fitness 8352100 REV. B . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.