Gebruiksaanwijzing /service van het product IM850-A van de fabrikant Lincoln Electric
Ga naar pagina of 26
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.
FOR ENGINE powered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors.
ii SAFETY ii ARC RA YS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87. I standards.
FOR ELECTRICALL Y powered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’s recommendations.
iv SAFETY iv Mar. ‘93 PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A L’Arc 1.
Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! Read this Operators Manual completely before attempting to use this equipment.
vi vi T ABLE OF CONTENTS Page Product Description .........................................................................................................................1 Recommended Processes ........................................................
1 PRODUCT DESCRIPTION POWER FEED 10S 1 PRODUCT SUMMAR Y The Power Feed 10S series of Automatic Wire Drives are designed for hard automation, submerged arc welding. The heavy-duty gearbox and feed plate have many years of proven reliability while a new perma- nent magnet motor has been added.
2 GENERAL INFORMA TION POWER FEED 10S 2 DESIGN FEA TURES • Closed-loop speed control. • Knurled drive rolls. • Heavy cast aluminum gearbox housing and feed plate assembly. • Wire straightener. • 32Vdc permanent magnet, high torque motor. • Conversion kit included to change speed range.
3 SPECIFICA TIONS POWER FEED 10S 3 TECHNICAL SPECIFICA TIONS - POWER FEED 10S PHYSICAL DIMENSIONS TEMPERA TURE RANGES Wire Feeders - Input V oltage and Current Voltage 32V DC HEIGHT 12.0 in. (305 mm) 12.0 in. (305 mm) 8.0 in. (203 mm) MODEL K2312-1 K2370-1 K2311-1 WIDTH 14.
A-1 INST ALLA TION POWER FEED 10S A-1 SAFETY PRECAUTIONS Read this entire installation section before you start installation. ELECTRIC SHOCK can kill. • Only qualified personnel should per- form this installation. • Turn the input power OFF at the dis- connect switch or fuse box before working on this equipment.
A-2 INST ALLA TION POWER FEED 10S A-2 POWER W A VE AC/DC 1000AMP SUBARC SYSTEM CONNECTIONS (See Figure A.1) 1 - Work cable connection 3 - 14 pin wire feeder control cable 4 - 5 pin Arclink control cable to user interface 7 - Electrode cable connection MOUNTING DIMENSIONS The PF-10S can be mounted by using the four 3/8-16 tapped holes or the two 0.
A-3 INST ALLA TION POWER FEED 10S A-3 CHANGING WIRE DRIVE CONFIGURA TION The POWER FEED-10S Wire Drives can be reconfig- ured to fit in any hard automation application. The POWER FEED-10S Wire Drives can be reconfig- ured in such a way that the wire feed direction is reversed.
A-4 INST ALLA TION POWER FEED 10S A-4 ELECTRODE AND WORK CONNECTIONS Due to the Power Wave AC/DC ” s ability to produce either a DC positive, DC negative or AC output the elec- trode and work connections do not need to be reversed for the different polarities.
A-5 INST ALLA TION POWER FEED 10S A-5 WELDING WITH MUL TIPLE ARCS Special care must be taken when more than one arc is welding simultaneously on a single part. Arc blow and arc interference may occur or be magnified. Each power source requires a work lead from the work stud to the welding fixture.
A-6 INST ALLA TION A-6 GEAR RA TIO CONVERSION KITS (SEE INSTRUCTIONS INCLUDED WITH CON- VERSION KIT) 1. Remove the 2 hex head screws and the 2 slot head screws holding the Motor to the Wire Drive Gearbox assembly. 2 . Remove existing Adapter Plate and Motor Assembly.
C-1 ACCESSORIES C-1 K231 1-1 MOTOR CONVERSION KIT (FOR 142:1 NA STYLE WIRE DRIVES)-- This conver- tion kit converts old NA style wire drives. 1. Remove the 2 hex head screws and the 2 slot head screws holding the Motor to the Wire Drive Gearbox assembly.
D-1 MAINTENANCE D-1 POWER FEED 10S SAFETY PRECAUTIONS ELECTRIC SHOCK can kill. • Only Qualified personnel should perform this maintenance. • Turn the input power OFF at the disconnect switch or fuse box before working on this equipment. • Do not touch electrically hot parts.
E-1 TROUBLESHOOTING E-1 POWER FEED 10S If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
E-2 TROUBLESHOOTING E-2 POWER FEED 10S If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
F-1 DIAGRAMS F-1 POWER FEED 10S B M20368 R P.M. U T A C H B 51 5 OUTPUT RECEPTACLE R U B 50 0 84 2 84 3 MOTOR/GEAR BOX 67 TAC H I NTE RFACE PC BD 5 8 N.
F-2 DIMENSION PRINT F-2 POWER FEED 10S L12119 A 4.25 6.16 2.43 5.19 3.50 .21 2.82 CENTERLIN E OF WIRE CENTERL INE OF W IRE 2.60 ISO VIEW (REF.ONLY) 2.50 .50 .50 O .562 (2 HOL ES) CENTERL INE OF WIRE CENTERL INE OF MOUNT ING BRACKET 4.26 6.16 11.29 3/ 8-16 TAPPED HOLES (4 PLACES) 7.
NOTES POWER FEED 10S.
W ARNING A VISO DE PRECAUCION A TTENTION W ARNUNG A TEN ÇÃ O Spanish French German Portuguese Japanese Chinese Korean Arabic READ AND UNDERST AND THE MANUFACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BE USED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES.
W ARNING A VISO DE PRECAUCION A TTENTION W ARNUNG A TEN ÇÃ O Spanish French German Portuguese Japanese Chinese Korean Arabic LEIA E COMPREENDA AS INSTRUÇÕES DO F ABRICANTE P ARA ESTE EQUIPAMENTO E AS P ARTES DE USO, E SIGA AS PRÁTICAS DE SEGURANÇA DO EMPREGADOR.
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.
Een belangrijk punt na aankoop van elk apparaat Lincoln Electric IM850-A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Lincoln Electric IM850-A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Lincoln Electric IM850-A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Lincoln Electric IM850-A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Lincoln Electric IM850-A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Lincoln Electric IM850-A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Lincoln Electric IM850-A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Lincoln Electric IM850-A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
