Gebruiksaanwijzing /service van het product WPC55AG van de fabrikant Linksys
Ga naar pagina of 27
Dual-Band Wireless A+G Notebook Adapter Use this guide to install: WPC55AG User Guide.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Linksys is a r egistered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other coun- tries. Copyright © 2003 Cisco Systems, Inc.
T able of Contents C hapter 1: Introduction 1 The Dual-Band W ireless A+G Notebook Adapter 1 F eatures 1 Chapter 2: Planning Y our Wireless Network 2 Netw ork T opolo gy 2 Ad-Hoc versus Infrastructure.
Chapter 1: Introduction The Linksys Dual-Band W ireless A+G Notebook Adapter lets your notebook communicate with all three wireless netw ork standards. W ith one PC Card , you can connect to W ireless-A (802.11a), W ireless-G (draft 802.11g) and W ireless- B (802.
If the wireless netw ork is relativel y small and needs to share resources only with the other computers on the wireless netw ork, then the ad-hoc mode can be used.
5 4 Chapter 3: The Dual-Band Wireless A+G Notebook Adapter’ s LEDs The Adapter has tw o LEDs to let you kno w how the card is functioning. Here is a description of those LEDs: Powe r Green . The Po w er LED lights up when the Adapter is po w- ered on.
7 1 . After installing the Adapter , the Windo ws XP W ireless Zero Conf iguration icon will appear in your computer’ s system tra y . Double-click the icon. 2. The screen that appears will sho w any a vailab le wireless netw ork. Select the netw ork you w ant.
9 3. If WEP is enab led , the screen in Figure 4-7 will appear . Enter the WEP key of y our wireless net- w ork in the Network ke y f ield , and re-enter it in the Conf irm networ k key f ield. Then click Connect , and go to Step 4. 4. The screen in Figure 4-8 will appear if your con- nection is activ e.
11 10 5. Choose a wireless mode for your netw ork. Click the Infrastructur e Mode radio button if you w ant your wireless computers to netw ork with computers on your wired netw ork using an access point. Click the Ad-Hoc Mode radio button if you w ant multiple wireless computers to netw ork directly with each other .
13 12 7. Revie w your settings on the F inalize Settings screen, sho wn in Figure 5-7, before the Setup W izard starts to copy your f iles. Click the Next button to continue. 8. After the f iles hav e been successfully copied , the screen in Figure 5-8 will appear .
15 14 Chapter 6: Using the WLAN Monitor for Windows 98, Me , and 2000 Use the WLAN Monitor to check the link infor mation, search for a vailable wireless netw orks, or make additional conf iguration changes.
17 The Link Information screen, sho wn in Figure 6-2, displa ys the Adapter’ s sig- nal strength and link quality information. Click the More inf ormation button for further infor mation about your wireless connection (see F igure 6-3).
If the wireless netw ork has WEP encryption enabled for security , you will see the screen sho wn in Figure 6-6. If the wireless netw ork has LEAP authentica- tion enabled for securi- ty , you will see the screen sho wn in Figure 6-7. If the wireless net- w ork emplo ys an Externally Managed 802.
21 When manually , the encr yption ke y must consist of the letters “ A” through “F” and the numbers “0” through “9” and should be 10 characters in length for 64- bit encryption, 26 characters in length for 128-bit encr yption, or 32 characters in length for 152-bit encryption.
23 Import - Click the Import button to import a prof ile that has been sa ved in another location. Select the appropriate f ile, as sho wn in Figure 6-10, and click the Open button. Export - Select the prof ile you w ant to sa ve in a different loca- tion, and click the Export button.
25 24 5. The Choose a networ k type screen (Figure 6-16) sho ws a choice of tw o net- w ork modes. Click the Infrastructure Mode radio button if y ou want y our wireless computers to communicate with computers on your wired netw ork via an access point.
If the wireless net- w ork has WEP encryption enabled for security , you will see the screen sho wn in Figure 6-20. If the wireless netw ork has LEAP authentica- tion enabled for security , you will see the screen sho wn in Figure 6-21. If the wireless netw ork emplo ys an Externally Managed 802.
29 8. The Conf irm New Settings screen will appear . T o sav e the new settings, click the Sa ve button. T o cancel the settings and return to the Pr of iles screen without sa ving your changes, click the Cancel button. T o edit the new settings, click the Back button.
31 30 3. I cannot communicate with the other computers linked via the Ethernet in the Infrastructure conf iguration. • Make sure that the notebook PC to which the Adapter is associated is pow- ered on.
an unintended receiv er, FHSS appears to be short-duration impulse noise. Direct-Sequence Spread-Spectrum (DSSS) generates a redundant bit patter n for each bit to be transmitted. This bit patter n is called a chip (or chipping code). The longer the chip, the g reater the probability that the original data can be reco vered.
35 34 Cardb us - A high-speed peripherals interface for notebook PCs that deliv ers 32-bit performance based on PCI bus architecture. CSMA/CA ( C ar rier S ense M ultiple A ccess/ C ollision A v oidan.
37 36 Gatew a y - A device that interconnects netw orks with different, incompatib le communications protocols. Hard war e - Hardware is the ph ysical aspect of computers, telecommunica- tions, and other information technology de vices.
39 38 puter , typically w eighs less than f ive pounds and is three inches or less in thick- ness. OFDM - Dev eloped for wireless applications, Or thogonal F requency Di vision Multiplexing (OFDM) technolo gy offers superior performance-increased data rates and more reliable transmissions-than pre vious technologies, such as DSSS.
TCP ( T ransmission C ontrol P rotocol) - A method (protocol) used along with the IP (Internet Protocol) to send data in the for m of message units (datag ram) betw een network de vices o ver a LAN or W AN.
Dimensions 4.72" x 0.51" x 2.13" (120 mm x 13 mm x 54 mm) Unit Weight 1.48 oz. (0.04 kg) Po w e r 3.3V Bus Powered Certifications FCC, CE, IC-03, Wi-Fi (802.11a, 802.11b), CCX WHQL: XP , 2000, Me Operating T emp. 0°C to 55°C Storage T emp.
45 44 Appendix E: Contact Information F or help with the installation or operation of the Dual-Band W ireless A+G Notebook Adapter , contact Linksys T echnical Suppor t at one of the phone num- bers or Internet addresses below .
© Copyright 2003 Cisco Systems, Inc. All Rights Reserved. http://www .linksys.com.
Een belangrijk punt na aankoop van elk apparaat Linksys WPC55AG (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Linksys WPC55AG heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Linksys WPC55AG vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Linksys WPC55AG leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Linksys WPC55AG krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Linksys WPC55AG bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Linksys WPC55AG kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Linksys WPC55AG . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
