Gebruiksaanwijzing /service van het product Kolektor van de fabrikant Linn
Ga naar pagina of 48
PACK 353 L IN N L I N N KOLEKTOR PREAMPLIFIER OWNERS MANUAL.
.
i Important safety information Explanation of symbols used in this manual and on the pr oduct: This symbol is intended to alert the user to the pr esence of uninsulated dangerous voltages within the enclosur e of suf ficient magnitude to cause electric shock.
ii GENERAL SAFETY INSTRUCTIONS 1. Read instructions. Read the safety and operating instructions befor e operating the appliance. 2. Retain instructions. Retain the safety and operating instr uctions for future refer ence. 3. Heed warnings. Observe all warnings on the appliance and in the operating instructions.
3 34 iii UK USERS PLEASE READ THIS IMPOR T ANT SAFETY INFORMA TION Fuse replacement This appliance is fitted with a non-rewir eable 13 Amp mains plug. The plug contains a 5 Amp fuse. If the fuse has blown it can be replaced as follows: a) Pull out the r ed fuse cover/carrier .
iv CE Declaration of Conformity Linn Products Ltd declar e that this product is in conformance with the Low V oltage Dir ective 73/23/EEC and Electromagnetic Compatibility 89/336/ EEC as amended by 92/31/EEC and 93/68/EEC.
32 locking a recor ding 18 M mains plugs i mains supply connecting 10 voltage selection 6 maintenance 28 modules audio 2 control 3 RS232 4 MUTE indicator 16 muting the sound 16 P phono input, position.
vi T echnical information ........................................ 30 Specifications ........................................ 30 Index ................
9 30 T echnical information Specifications General Dimensions 80mm x 320mm x 325mm (3.15" x 12.6" x 12.88") (H x W x D) W eight 4kg Power consumption 8W maximum Mains supply fuses 100 .
viii 29 America: Linn Incorporated 4540 Southside Boulevard, Suite 402, Jacksonville Florida 32216 T elephone: (904) 645 5242 Facsimile: (904) 645 7275 E-mail: linnincorporated@compuserve.
7 28 Unexpected response to dir ect source keys or power up commands If the KOLEKTOR behaves in an unexpected way during power up, check the values set in your user options. Certain user options may interfere with your r equired choice so it is a good idea to r ead the section User options , page 24, befor e changing them.
2 M S R C - R E C O R D L I N N K O L E K T O R S R C + V O L - V O L+ H E A D P H O N E tu 2 Y our Linn KOLEKT OR As the name implies we intended the KOLEKTOR to gather together the signals fr om the ever increasing number of sound sources, and contr ol them with high quality , direct signal handling and a simple, flexible control system.
5 26 Factory default settings The KOLEKTOR Preamplifier pr ovides a Reset to Factory Defaults option which allows you to r eset the unit back to its factory settings. This r estores the user options to their initial values, and resets the inputs to their initial sour ce names.
4 Interface module This attention to detail also applies to the RS232 module. Ther e is no electrical connection between the RS232 ports and the internal circuitry . This pr events any noise from the external contr olling system entering the audio cir cuitry .
3 24 User options The following table lists the user options pr ovided. In each case the initial value is shown underlined. Number Name Description V alues U1 Default V olume The default volume setting on power up. 0 = V olume 15 Ignored if U5 is enabled.
6 Setting up the KOLEKT OR This chapter explains how to unpack your KOLEKTOR, and how to set it up with your other hi-fi components. Unpacking The KOLEKTOR is supplied complete with the following acce.
22 Changing user options The KOLEKTOR provides 12 user options to allow you to change the way the unit operates to suit your personal pr eferences. T o change the user options VOL- SWITCH ON POWER """" 1 0 Switch off the KOLEKTOR, using the power switch on the fr ont panel.
8 the front panel should be kept out of dir e ct sunlight, and it should not be obscur ed. Note that certain types of halogen lamps, and low-ener gy or fluorescent bulbs, can also inter fere with use of the handset if they are near to the infra-r ed sensor .
9 20 The procedur e for configuring sour ces is described in the following sections. T o start configuring inputs Switch off the KOLEKTOR using the power switch on the fr ont panel. SRC- SWITCH ON POWER """" cd 1 RENAME SOURCE Press and hold down SRC- (front panel) and switch on the power again.
10 Connecting the mains supply Connect the mains lead to the KOLEKTOR and plug it into a suitable power outlet. 19 Customising the KOLEKT OR This chapter explains the advanced featur es of the KOLEKTOR, including configuring the sour ce inputs and the user options.
7 18 Recor ding a sour ce The KOLEKTOR allows you to r ecord fr om any source to the tape output, and lock the sour ce so that you cannot accidentally select another source while r ecording.
12 The function of each key is explained in the following table: Press this key T o do this M Mute or unmute the sound. SRC- and SRC+ Select the previous/next sour ce. RECORD Lock and unlock the current input to avoid accidentally changing the input while recor ding.
5 16 T o change the volume VOL+ VOL- 27 VOLUME Press VOL- or VOL+ (front panel or handset), or hold down the corresponding key to decr ease or incr ease the volume continuously . Y ou can change the volume in precise steps of 1dB fr om 0 to 60. T o display the current volume setting pr ess either key briefly .
3 14 Switching on and off T o switch on T o switch the KOLEKTOR on press the power button on the fr ont panel. When you first switch on the KOLEKTOR the display shows the name of the currently selected sour ce and the input number it uses. T o customise the display operation see U2, U9, and U10 in User options , page 24.
3 14 Switching on and off T o switch on T o switch the KOLEKTOR on press the power button on the fr ont panel. When you first switch on the KOLEKTOR the display shows the name of the currently selected sour ce and the input number it uses. T o customise the display operation see U2, U9, and U10 in User options , page 24.
5 16 T o change the volume VOL+ VOL- 27 VOLUME Press VOL- or VOL+ (front panel or handset), or hold down the corresponding key to decr ease or incr ease the volume continuously . Y ou can change the volume in precise steps of 1dB fr om 0 to 60. T o display the current volume setting pr ess either key briefly .
12 The function of each key is explained in the following table: Press this key T o do this M Mute or unmute the sound. SRC- and SRC+ Select the previous/next sour ce. RECORD Lock and unlock the current input to avoid accidentally changing the input while recor ding.
7 18 Recor ding a sour ce The KOLEKTOR allows you to r ecord fr om any source to the tape output, and lock the sour ce so that you cannot accidentally select another source while r ecording.
10 Connecting the mains supply Connect the mains lead to the KOLEKTOR and plug it into a suitable power outlet. 19 Customising the KOLEKT OR This chapter explains the advanced featur es of the KOLEKTOR, including configuring the sour ce inputs and the user options.
9 20 The procedur e for configuring sour ces is described in the following sections. T o start configuring inputs Switch off the KOLEKTOR using the power switch on the fr ont panel. SRC- SWITCH ON POWER """" cd 1 RENAME SOURCE Press and hold down SRC- (front panel) and switch on the power again.
8 the front panel should be kept out of dir e ct sunlight, and it should not be obscur ed. Note that certain types of halogen lamps, and low-ener gy or fluorescent bulbs, can also inter fere with use of the handset if they are near to the infra-r ed sensor .
22 Changing user options The KOLEKTOR provides 12 user options to allow you to change the way the unit operates to suit your personal pr eferences. T o change the user options VOL- SWITCH ON POWER """" 1 0 Switch off the KOLEKTOR, using the power switch on the fr ont panel.
6 Setting up the KOLEKT OR This chapter explains how to unpack your KOLEKTOR, and how to set it up with your other hi-fi components. Unpacking The KOLEKTOR is supplied complete with the following acce.
3 24 User options The following table lists the user options pr ovided. In each case the initial value is shown underlined. Number Name Description V alues U1 Default V olume The default volume setting on power up. 0 = V olume 15 Ignored if U5 is enabled.
4 Interface module This attention to detail also applies to the RS232 module. Ther e is no electrical connection between the RS232 ports and the internal circuitry . This pr events any noise from the external contr olling system entering the audio cir cuitry .
5 26 Factory default settings The KOLEKTOR Preamplifier pr ovides a Reset to Factory Defaults option which allows you to r eset the unit back to its factory settings. This r estores the user options to their initial values, and resets the inputs to their initial sour ce names.
2 M S R C - R E C O R D L I N N K O L E K T O R S R C + V O L - V O L+ H E A D P H O N E tu 2 Y our Linn KOLEKT OR As the name implies we intended the KOLEKTOR to gather together the signals fr om the ever increasing number of sound sources, and contr ol them with high quality , direct signal handling and a simple, flexible control system.
7 28 Unexpected response to dir ect source keys or power up commands If the KOLEKTOR behaves in an unexpected way during power up, check the values set in your user options. Certain user options may interfere with your r equired choice so it is a good idea to r ead the section User options , page 24, befor e changing them.
viii 29 America: Linn Incorporated 4540 Southside Boulevard, Suite 402, Jacksonville Florida 32216 T elephone: (904) 645 5242 Facsimile: (904) 645 7275 E-mail: linnincorporated@compuserve.
9 30 T echnical information Specifications General Dimensions 80mm x 320mm x 325mm (3.15" x 12.6" x 12.88") (H x W x D) W eight 4kg Power consumption 8W maximum Mains supply fuses 100 .
vi T echnical information ........................................ 30 Specifications ........................................ 30 Index ................
32 locking a recor ding 18 M mains plugs i mains supply connecting 10 voltage selection 6 maintenance 28 modules audio 2 control 3 RS232 4 MUTE indicator 16 muting the sound 16 P phono input, position.
iv CE Declaration of Conformity Linn Products Ltd declar e that this product is in conformance with the Low V oltage Dir ective 73/23/EEC and Electromagnetic Compatibility 89/336/ EEC as amended by 92/31/EEC and 93/68/EEC.
3 34 iii UK USERS PLEASE READ THIS IMPOR T ANT SAFETY INFORMA TION Fuse replacement This appliance is fitted with a non-rewir eable 13 Amp mains plug. The plug contains a 5 Amp fuse. If the fuse has blown it can be replaced as follows: a) Pull out the r ed fuse cover/carrier .
ii GENERAL SAFETY INSTRUCTIONS 1. Read instructions. Read the safety and operating instructions befor e operating the appliance. 2. Retain instructions. Retain the safety and operating instr uctions for future refer ence. 3. Heed warnings. Observe all warnings on the appliance and in the operating instructions.
.
i Important safety information Explanation of symbols used in this manual and on the pr oduct: This symbol is intended to alert the user to the pr esence of uninsulated dangerous voltages within the enclosur e of suf ficient magnitude to cause electric shock.
PACK 353 L IN N L I N N KOLEKTOR PREAMPLIFIER OWNERS MANUAL.
Een belangrijk punt na aankoop van elk apparaat Linn Kolektor (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Linn Kolektor heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Linn Kolektor vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Linn Kolektor leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Linn Kolektor krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Linn Kolektor bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Linn Kolektor kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Linn Kolektor . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
