Gebruiksaanwijzing /service van het product T2810C van de fabrikant Mach Speed Technologies
Ga naar pagina of 28
Model T2810C Instruction Manual Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual.
Information in the manual is subject to change without notice and is subject to copyright protection. Copying or otherwise reproducing this material without prior written consent is prohibited. Due to Firmware changes, some of the pictures and functions described in this manual may not be the same as are included with your player.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution • Do not use the player in exceptionally cold or hot, dusty, damp or dry environments.
Basic Operati ons Powering ON To power the player on, press and hold the silver button on the front of the device for 5 seconds. Powering OFF To power the player off, press and hold the silver button on the front of the device for 5 seconds. You will get a message which states “double tap to power off”.
Inserting: Ensure that the player is powered off, and disconnected from the computer. Hold the Micro SD card face up (side with words aligned in the opposite direction of the display screen), and slide the card into the socket on the player, slightly past flush.
3. Drag your music to the sync list (on the right of the screen) from the list on the left. Once you have selected the music you wish to add to the player, press Sync.
5. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device. COPY AND PASTE Note - This alternat e method is used to load videos, pictures, and ebook fil es as well as audio files 1.
2. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your d esktop). The icon will be called safely remove hardware. 3. Go to the “My Computer” section of your computer.
6. Locate the music stored on your computer. Generally this is stored in the “My Music” folder of your computer. NOTE: if you are unable to locate the music on your computer, click on start, search, files and folders, then search for “*.MP3, *.WMA”.
7. Once you have located the song files, you can right click on the song itself, and select “copy”. Open the removable disk drive, right click on in the empty space, and select Paste. This will transfer the song on to your player. 8. Repeat step 7 for as many songs as you want to copy on to the unit.
Delete icon- touching this icon will delete the currently selected file or folder Date and ti me - this is generally displayed in the upper left hand corner of the screen and is set in the “system s.
Icon explanation (from top to bottom) File count- displays the number of the file you are on and the total number of files. Playmode icon- allows you to adjust your playmode. Chose from play all, play by rating, play one, repeat one, and repeat all Shuffle icon- Allows you to select your shuffle mode.
Volume bar- you can drag the slider forward or backward to increase or decrease the volume. Previous and Next icons- located next to the Play button, touching these icons will skip the previous or next file. Play/Pause icon- when you enter the music mode, your song will begin playing automatically.
Video Mode Video mode will allow you to watch your movie and video files loaded on the player. • Note - this player will playback files which are in AVI (XVID), WMV (non encrypted), and FLV formats. If you are having a hard time viewing your video files, please convert them using the AVI conversion tool included with the player.
Play- when you enter video mode, the player will automatically begin playing your file, and you will see the play icon displayed. If you touch this icon, it will pause the file and the icon will change to the Pause icon. Tap it again to r esume playback.
When you enter photo mode, you will see a list of thumbnail images to browse through. Tap one of the thumbnails to view the image. Tapping the “List” icon will change your view from thumbnails to a simple list of files. Icon explanation (Left to right) Slideshow- tap this icon to alternate from manual image viewing to slideshow mode.
Browse- this will allow you to select files using one of several options. A. Main Dir - select files loaded on the player’s memory B. Card Dir- select files loaded on the SD card Slideshow timer - set the time that an image is displayed before changing to the next in slideshow mode.
When you enter eBook mode, a list of text files are displayed, and you can tap the one you wish to view. Icon Explanation (Top, Left to right) Slideshow- tap this icon to alternate from manual image viewing to slideshow mode.
Slideshow timer- set the time that a page is displayed before changing to the next in slideshow mode. Bookmark- allows you to set a bookmark on your current file, or to recall a bookmark you have previously set. Skip to- select this item to skip ahead in the current eBook file.
Camera Interface 1. Desktop- Return to the M ain Menu . 2. Self- timer - off, 5 sec, 15 sec, 20 sec. Default is off. 3. Space- Shows the remaining number of pictures you can take in your current settings, until the memory is full.
4. Swap- Swap between Camera and video recorder mode. 5. Picture Mode- Takes you to picture mode, and allows you to browse pictures you have taken. 6. Settings- Allows you to adjust the settings, incl.
PC Camera When the Player is powered on, select PC camera, and connect the device to your computer’s USB port. Your computer will run a setup and install the device as a PC camera, which will allow you to use the device as a webcam.
Applicati ons The Applications item on the main menu allows you to access one of several “extra” applications on the player. Please note that applications may be added or removed as firmware chang.
This will display information about your player, including the firmware version, memory, and number of files. Set Time This will allow you to adjust the date and time, which is displayed on most screens of the player.
Video Conversion If your video files will not play on your Trio player, you can convert them using the conversion tool which is included with the device. To do so, you will need to first install the software. When you connect the player to your computer, it will act as a removable disk drive.
quality, you simply need to select the “Begin” button and the player will convert the file for you. Please note that if the player is connected to your computer when you open this tool, you will see an additional window to the right of the main window.
model) at Mach Speed Technologies option, without charge for either parts or labor. This warranty shall not apply if the product is modified, tampered with, misused, physically damaged, or subjected to abnormal working conditions (including, but not limited to, electrical, fire, and water damage).
4. Mach Speed Technologies will make every reasonable effort to deliver on time however; Mach Speed Technologies will not be liable for late or lost shipments.
Een belangrijk punt na aankoop van elk apparaat Mach Speed Technologies T2810C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mach Speed Technologies T2810C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mach Speed Technologies T2810C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mach Speed Technologies T2810C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mach Speed Technologies T2810C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mach Speed Technologies T2810C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mach Speed Technologies T2810C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mach Speed Technologies T2810C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
