Gebruiksaanwijzing /service van het product 4303C van de fabrikant Makita
Ga naar pagina of 16
Electronic Jig Saw Length of stroke MODEL 4303C weight I Net Strokes Overall per minute length Max. cutting capacities Wood Steel INSTRUCTION MANUAL SPECIFICATIONS 2.5 kg 'Omm I I!$: 1 1,000 - 3,000 I 219mm (1") 1 (2.318") (8-518") 1 (5.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
Installing Makita jig saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blade. Use the hex wrench to loosen the bolt. With the blade teeth facing forward, insert the blade into the blade holder as far as it will go.
Installing universal shank jig saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blade. If the universal blade clamp is used, you can use blades of other makes which have a universal shank like the one shown in the figure, with a blade width of 6.
Straight line or orbital cutting action I Conventional jig saws cut with a straight line action, that is, the blade moves only up and down in a straight line. Your saw also cuts in this manner but, for softer workpieces, an orbital cutting action can be selected.
Speed change To adjust the tool speed, turn the speed change dial. The tool speed can be adjusted between 1,000 and 3,000 strokes per minute. Number 1 The reference table on the right denotes the relationship between the number set- tings on the speed change dial and the approximate strokes per minute at that setting.
Operation Turn the tool on and wait until the blade attains full speed. Then rest the base flat on the workpiece and gently move the tool forward along the previously marked cut- ting line. When cutting curves, advance the tool very slowly. I . I CAUTION : Failure to hold the tool base flush with the workpiece may cause blade breakage.
I I Front flush cuts Loosen the bolt on the back of the base with the hex wrench, then slide the base backwards. Check the contact between the back edge of the blade and the roller, then secure the bolt. Plunge cutting Starting a cut at other than the edge of the workpiece without first drilling a starting hole requires a "plunge cut".
Using guide rule (Rip fence) When cutting widths of under 150 mm (6") repeatedly, use of the guide rule will assure fast, clean, straight cuts. ~ I To attach the guide rule (rip fence), secure the rule holder to the base with the screw (do not tighten).
To attach the circular guide, use the pin, inserting it in the center hole (arrow) and secure it with the threaded knob. Then slide the base of the tool forwards. The circular guide attaches to the base of the tool in the same manner as the guide rule (rip fence).
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon brus.
Jig saw blade H 1.5 - 3 mm thick 11/16’’ - 1/8”) H 1 - 6 mm thick 1 - 3 mm thick (3164‘’ - 114“) 13/64” - 1/8”) H 3 - 55 mm thick (1/8” - 2-1/8”) H 3 - 30 mm thick 3 - 10 mm thick 11/8” - l-l/8”) 11/8” - 3/8”) Application Plastics Aluminum Mild steel 1.
May-19--'94 US ELECTRONIC JIG SAW Model 4303C Note: The switch and other part configurations may differ from country to country. 15.
MODEL 4303C ZD DESCRIPTION =E 1 2 3 4 5 6 7 8 9 0 11 2 3 14 18 19 20 21 22 23 24 25 26 2, 28 29 30 31 32 33 34 35 36 31 38 39 40 - 1 1 1 1 1 1 4 1 1 1 3 1 1 1 1 1 1 1 1 1 1 ITEM NO NO USED MA1 41 42 4.
Een belangrijk punt na aankoop van elk apparaat Makita 4303C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Makita 4303C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Makita 4303C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Makita 4303C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Makita 4303C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Makita 4303C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Makita 4303C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Makita 4303C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
