Gebruiksaanwijzing /service van het product NR1604 van de fabrikant Marantz
Ga naar pagina of 168
Owner’ s Man ual A V Sur r ound Receiv er NR1604 Basic instructions Advanced instructions Information DVD.
I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sucient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.
1 Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference.
2 Features Digital video processor upscales analog video signals (SD resolution) to HD (720p/1080p) and 4K This unit features a sophisticated video processor that can upscale standard definition (SD).
3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
Basic instructions 4 F Connections v page5 F Setup v page22 F Playback (Basic operation) v page29 F Network content v page46 F Selecting a listening mode (Sound Mode) v page72 For speaker connections, see page81 . Basic instructions Here we explain the connections and basic operation methods for this unit.
5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables.
6 Important information Converting input video signals for HD output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of video output connectors (HDMI, component video and composite video).
7 Connecting HDMI devices You can connect up to eight HDMI-compatible devices (7-inputs/1-output) to the unit. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable oer the following benefits that can not be achieved with other connection methods.
8 Connecting HDMI devices n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via the HDMI cable.
9 Connecting HDMI devices Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable • This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.
10 Connecting HDMI devices OUT HDMI G Front panel H Video camcorder (Primary) • When connecting a device that supports Deep Color or 4K, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. • Video signals are not output if the input video signals do not match the display’s resolution.
11 Connecting HDMI devices n About Content Type This function was added with the HDMI standard. It automatically makes settings suitable for the video- output type (content information). NOTE To enable the Content Type, set “Video Mode” to “Auto” ( v page116 ).
12 Connecting other devices For highest quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page7 “Connecting HDMI devices”). This section describes alternate connection methods when your device does not support HDMI connections.
13 Connecting other devices Connecting a TV • This section describes how to connect when your TV does not support ARC (Audio Return Channel). For instructions on HDMI connections, see “Connecting this unit to a TV via HDMI connections” ( v page9 ).
14 n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.
15 Connecting other devices Connecting a DVD player This section describes how to connect a DVD player that does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” ( v page7 ).
16 Connecting an iPod or USB memory device to the USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 31 ) or “Playing a USB memory device” ( v page34 ).
17 Connecting other devices Connecting a CD player You can enjoy CD sound with the player connected by digital or analog cables. R L R L a A UDIO A UDIO R L OUT CD player n Audio connection The following methods are available for connecting to this unit.
18 Connecting an FM/AM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 37 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal.
19 Connecting other devices Connecting a wireless receiver (RX101) • You can connect a wireless receiver (RX101, sold separately) to play back music on your Bluetooth device with this unit. • To do this, switch the input source to “M-XPort” ( v page29 “Selecting the input source”).
20 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
21 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) NOTE • Do not plug in the power cord until all connections have been completed.
22 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the Setup and measurement microphone in multiple locations all around the listening area.
23 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting.
24 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey® Setup) 5 Select “Start” and then press ENTER . Audyssey Setup Back Next Connect the calibration microphone to the SETUP MIC input on the front the AV receiver.
25 Calculation Set up speakers (Audyssey® Setup) 11 Repeat step 10, measuring positions 3 to 6. When measurement of position 6 is completed, a “Measurements finished.” message is displayed. Audyssey Setup Repeat Last Test Calculation Measurements finished.
26 Set up speakers (Audyssey® Setup) 14 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now storing...Please wait. 50% Audyssey Setup Distances Speaker Config. Levels Crossovers Store Check processing results. To proceed, press “Store”.
27 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures.
28 Check Results This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Press SETUP to display the menu on the TV screen. 2 Use u to select “Speakers” – “Audyssey ® Setup” and then press ENTER or p .
29 Playback (Basic operation) Setup ( v page22 ) n Turning the power on ( v page29 ) n Selecting the input source ( v page29 ) n Adjusting the master volume ( v page30 ) n Turning o the.
30 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page112 ). n When the “Scale” setting ( v page112 ) is “0 – 98” G Adjustable range H 0.
31 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the USB port” ( v page16 ).
32 Playing an iPod n Setting operation mode (iPod Browse Mode) In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”.
33 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION with “iPod Browse Mode” set to “On-Screen”. The option menu screen is displayed.
34 Playing a USB memory device Playing back music or viewing still picture (JPEG) files stored on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit.
35 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page16 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p .
36 Playing a USB memory device n USB memory device operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name etc.
37 Listening to FM/AM broadcasts For antenna connections, see “Connecting an FM/AM antenna” ( v page18 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency.
38 Listening to FM/AM broadcasts n Changing the screen display duration Make this setting at “Now Playing” ( v page 118 ) in the menu. The default setting is “Always On”. When “Auto O” is set, the on-screen display is turned o 30 seconds after an operation.
39 Listening to FM/AM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “TUNER”. 2 Press OPTION . The option menu screen is displayed.
40 Listening to FM/AM broadcasts n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset.
41 Listening to FM/AM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press TUNER to switch the input source to “TUNER”.
42 Listening to FM/AM broadcasts n Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten.
43 Listening to FM/AM broadcasts n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press TUNER to switch the input source to “TUNER”.
44 Listening to FM/AM broadcasts n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed.
45 Listening to FM/AM broadcasts Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H TUNE+/- STEREO AUTO CH / OPTION TUNER FM 92.
46 Listening to Internet Radio Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows.
47 Listening to Internet Radio n Adjusting the sound quality (M-DAX) Make this setting at “M-DAX” ( v page111 ) in the menu. You can use the M-DAX function to improve the fidelity of compressed audio sources such as content from Internet Radio stations.
48 Listening to Internet Radio n Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be dicult, because there are too many stations.
49 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below.
50 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a Media Server, be sure to apply this setting first.
51 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 20 “Connecting to a home network (LAN)”).
52 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function.
53 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page54 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users.
54 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr.
55 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p .
56 Using online services Listening to Pandora® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 20 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page129 ).
57 Using online services Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function.
58 Using online services n Listening to an existing station Use ui and select the radio station (“D&M2 Radio”) that you want to listen to, and press ENTER or p .
59 Using online services n Pandora operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Video Sel.
60 Using online services Listening to SiriusXM Internet Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback.
61 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 Use ui to select “Sign Out”, then press ENTER or p . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER .
62 Using online services Listening to Spotify Introduce your Marantz to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.
63 Using online services 9 Press p while a track is playing. The Spotify menu screen is displayed. [1/3] Star this track Browse “Artist name” Browse “Album name” Track-Artist Back Star this track Adds a star to the selected track. Browse “Artist name” Displays the list of albums by the artist of the track that is being played back.
64 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions.
65 Convenient functions Performing random playback (Random) USB Media Server Spotify 1 While content is playing, press OPTION . The option menu screen is displayed.
66 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Save to Favorites) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server).
67 Convenient functions n Deleting content added to favorites (Remove from Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Spotify Network 3 Use ui to select the content you want to delete from favorites, then press OPTION .
68 Convenient functions 3 Use o p to select the Video Select mode. • Each time o p is pressed, the setting is changed as shown below. O ff On O Disable Video Select mode. On Enable Video Select mode. 4 If you selected “On” in step 3, press i and select “Source”.
69 Convenient functions 3 Use o p to select picture mode. OPTION Internet Radio Title Now Playing Artist Album 00:06 100% MP3 128kbps Back Option Picture Mode Standard • Each time o p is pressed, the setting is changed as shown below. O ff Movie Standard Custom Vivid Streaming O No picture quality adjustment is done with this unit.
70 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote App z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store.
71 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences.
72 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playback modes. Multi-channel audio formats are provided on popular movie and music disc f.
73 Selecting a listening mode Pure Direct playback This mode is for playback with higher sound quality than in “DIRECT” mode, by turning o the front panel display panel, which can eliminate faint low level noise from creeping into sensitive analog circuitry.
74 Selecting a listening mode Operation button Input signal Listening mode 2-channel z 1 STEREO AUTO z 2 DOLBY PL g x Music z 3 DOLBY PL g Music z 3 DOLBY PL g z Height z 3 DTS NEO:6 Music z 3 MULTI C.
75 Selecting a listening mode z 1 2-channel also includes analog input. z 2 When AUTO mode is selected, the sound mode that is compatible with the input signal is used for playback. z 3 This mode plays back 2-channel sources in 5.1 or 7.1-channel playback.
76 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when the Dolby Pro Logic g x decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s).
77 Selecting a listening mode Original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. Stereo audio (2 channel) sources are played back via the front (L/R) speakers, the surround speakers and if connected the surround back speakers.
Advanced instructions 78 F Installation/connection/setup of speakers (Advanced) v page79 F Connections (Advanced connection) v page93 F Playback (Advanced operation) v page95 F Playback in ZO.
79 Procedure for speaker settings Speaker installation Speaker connection ( v page81 ) Set up speakers ( v page91 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room.
80 Speaker installation When 7.1-channel speakers are installed using front height speakers FL FR FHR FHL C SL SR SW z 1 z 2 z 3 Listening position z 1 22˚ – 30˚ z 2 22˚ – 45˚ z 3 90˚ – 110.
81 Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. n Connecting 7.1-channel speakers using surround back speakers ( v page83 ) n Connecting 7.1-channel speakers using front height speakers ( v page84 ) n Connecting 6.
82 Speaker connection n About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable.
83 Speaker connection Connecting 7.1-channel speakers using surround back speakers The illustration on the right shows a connection example for performing 7.
84 Speaker connection Connecting 7.1-channel speakers using front height speakers The illustration on the right shows a connection example for performing 7.
85 Speaker connection Connecting 6.1-channel speakers using one surround back speaker If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1-channel speakers are installed” ( v page80 ).
86 Speaker connection Connecting 5.1-channel speakers To perform 5.1-channel playback, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up “Amp Assign”” ( v page91 ). NOTE • For speaker cable connections, see page82 .
87 Speaker connection Connecting front A/B speakers You can connect a second set of speakers to this unit and use them for playback. In this case, set “Assign Mode” to “Front B” in steps 3 to 5 for “Set up “Amp Assign”” ( v page91 ).
88 Speaker connection Connecting 2.1-channel speakers NOTE • For speaker cable connections, see page82 . • For speaker impedance, see page81 .
89 Speaker connection Connecting front speakers with a bi-amp connection Some audiophile loudspeakers can be connected to an amplifier with two separate amp-to-speaker connections per each speaker.
90 Speaker connection Connecting a front speaker that uses a power amplifier This unit supports connection of a front speaker that uses an external power amplifier to increase its output. Connect a separately sold power amplifier to the PRE OUT (FL/FR) connector of this unit.
91 1 Set up the zone mode Press MAIN to switch the zone mode. MAIN lights. Press MAIN 2 Connect the Setup and measurement microphone. Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone.
92 Set up speakers 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . Channel Select Subwoofer Surround Back Measure Measure(2spkrs) Audyssey Setup Channel Select Amp Assign Check Results Restore.
93 Connections (Advanced connection) Connecting the REMOTE CONTROL connectors Remotely connecting Marantz devices n Performing operations by RC on this unit without visual contact • You can conne.
94 Connecting an external control device DC OUT jack When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.
95 Setup ( v page22 ) Playback (Basic operation) ( v page29 ) Selecting a listening mode (Sound Mode) ( v page72 ) Connections (Advanced connection) ( v page93 ) n HDMI control function ( .
96 HDMI control function If the HDMI control function does not operate properly, check the following points. • Is the TV or player compatible with the HDMI control function? • Is “HDMI Con.
97 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 20 “Connecting to a home network (LAN)”) in order to use the web control function.
98 Web control function G Example 2 H Setup menu screen Video/HDMI Setup Video Picture A djust Output Settings On Screen Display TV For mat Aut o Lip Sync On Off HDMI Audio Out AVR TV HDMI Pass Throug.
99 Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. X ON/ST ANDBY VOLUME DISPLA Y M-DAX ST A TUS INTERNET RADIO ZONE2 SOURCE n Disabling all key button operations 1 Press X while you press and hold DISPLAY and M-DAX with the unit in standby mode.
100 Remote lock function • When not connecting an IR receiver, disable the Remote lock function. When the function is enabled, you can not perform operations with the remote control unit.
101 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2.
102 Sleep timer function • This is convenient for viewing and listening while going to sleep in ZONE2. • The sleep timer function can be set by zone. 1 Press ZONE2 to switch the zone mode. ZONE2 lights. 2 Press SLEEP and display the time you want to set.
103 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
104 Menu map Setting items Detailed items Description Page General Language Sets the language for display the menu on the TV screen. 132 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 132 Zone Rename Change the display title of each zone to one you prefer.
105 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Audio Dialog Level Subwoofer Level Surround Parameter Tone M-DAX Audio Delay V.
106 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w w Audio q Press SETUP to display the menu screen.
107 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page64 ) • Preset Name ( v page43 ) .
108 Audio Make audio-related settings. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
109 Surround Parameter Default settings are underlined. You can adjust the surround audio sound field eects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode.
110 Setting items Setting details Height Gain Control the front height channel volume. Low : Reduce the front height channel volume. Normal : Front height channel sound is output with standard sound volume. High : Increase the front height channel volume.
111 M-DAX Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear.
112 Audio Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output so that the video and audio are synchronized.
113 Audio Setting items Setting details Dynamic EQ Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® . On : Use Dynamic EQ. O : Do not use Dynamic EQ.
114 Video Make video-related settings. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
115 Video Picture Adjust Default settings are underlined. Picture quality can be adjusted. We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments.
116 Video Setting items Setting details HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. On : Use HDMI control function. O : Do not use HDMI control function. • When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “O”.
117 Video Setting items Setting details i/p Scaler Convert the input source resolution to the resolution set. CBL/SAT z DVD z Blu-ray z GAME z AUX1 z AUX2 z MEDIA PLAYER z iPod/USB CD z NETWORK TV AUD.
118 Video On Screen Display Default settings are underlined. Select the on-screen display user interface preferences. Setting items Setting details Volume Sets where to display the master volume level. Bottom : Display at the bottom. Top : Display at the top.
119 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen.
120 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX1 AUX2 MEDIA PLAYER CD TV AUDIO 1 / 2 / 3 / 4 / 5 / 6 / FRONT : Assign an HDMI input connector to the selected input source.
121 Setting items Setting details DIGITAL Set this to change the digital audio input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX1 AUX2 MEDIA PLAYER CD TV AUDIO COAX (Coaxial) / OPT (Optical) : Assign a digital input connector to the selected input source.
122 Inputs Source Rename Change the display name of the selected input source. This is convenient when the input source name of your device and the input source name of this unit are dierent. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
123 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page112 , 113 ).
124 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after perfor.
125 Setting items Setting details Levels Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • Front L / F. Height L / Center / F. Height R / Front R / Surround R / Surr.Back R z / Surr.
126 Speakers Setting items Setting details Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Speaker Selection : Selects how to set the crossover frequency.
127 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).
128 Information Display network information. Setting details Friendly Name / DHCP On or O / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Enables network communication in standby power mode.
129 Network Settings Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Network Information IP Control Friendly Name Settings Di.
130 Network Diagnostics Used to check the network connection. Setting items Setting details Physical Connection Checks the physical LAN port connection. OK : Connected. Error : The LAN cable is not connected. Check the connection. Router Access Checks the connection from this unit to the router.
131 General Make various other settings. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
132 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Français / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed.
133 Trigger Out Selects when to activate trigger out. For details about how to connect the DC OUT jacks, see “DC OUT jack” ( v page94 ). Setting details n When setting for zone (MAIN ZONE / ZONE2) Trigger out is activated through linkage to the power of the zone set to “On”.
134 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presence of front, surround, LFE).
135 General Usage Data To help us improve our products and customer service, Marantz collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Marantz will never provide any information we collect to third parties.
136 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page127 ).
Information 137 F Part names and functions v page138 F Other information v page143 F Troubleshooting v page153 F Specifications v page158 F Index v page159 Information Here we list other information related to this unit. Please refer to this information as needed.
138 Front panel For buttons not explained here, see the page indicated in parentheses ( ). q e r y u i t Q5 w Q9 Q8 Q6 W0 Q7 Q0 o Q3 Q1 Q2 Q4 q Power indicator ····················.
139 Display t r y u i o Q0 Q1 Q2 q w e q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e MULTI ZONE indicators This lights up when ZONE2 (separate room) power is turned on ( v page101 ).
140 Rear panel See the page indicated in parentheses ( ). Q2 q w e r t y u o Q1 Q0 Q3 Q4 i q FM/AM antenna terminals (ANTENNA) ································ ( 18 ) w.
141 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). Q2 o Q0 i Q3 Q6 Q7 Q5 Q1 Q4 t y u r e w q q ZONE SELECT buttons (MAIN, ZONE2) ···········.
142 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit.
143 Other information n Trademark information ( v page143 ) n Surround ( v page144 ) n Relationship between video signals and monitor output ( v page148 ) n Explanation of terms ( v page15.
144 Surround This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices.
145 Surround Sound Mode ( v page72 ) Surround Parameter ( v page109 ) Subwoofer ( v page109 ) Tone z 9 ( v page111 ) Audyssey ( v page112 ) M-DAX z 12 ( v page111 ) PRO LOGIC g / g x.
146 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode.
147 Surround Sound Mode ( v page72 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL PCM (Multi- channel) PCM (2-channel) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.
148 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Conversion Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONEN.
149 Video signal resolution conversion table When “Video Conversion” ( v page116 ) is set to “On”, “i/p Scaler” ( v page 117 ) is set to “Analog”, “Analog & HDMI” or “H.
150 Explanation of terms A A2DP A2DP is one profile of Bluetooth defined for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images.
151 DTS Express DTS Express is an audio format supporting low bit rates (max. 5.1 channels, 24 to 256 kbps). DTS-HD This audio technology provides higher sound quality and enhanced functionality than the conventional DTS and is adopted as an optional audio for Blu-ray Disc.
152 W Windows Media DRM This is a copyright protection technology developed by Microsoft. Content providers are using the digital rights management technology for Windows Media contained in this devic.
153 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below.
154 G Video H Symptom Cause/Solution Page No picture appears. • Check the connection between the video output terminal of this unit and the input terminal of the TV. • Match the input settings to the input terminal of the TV connected to this unit.
155 G FM/AM H Symptom Cause/Solution Page Reception fails, or there is a lot of noise or distortion. • Change the antenna orientation or position. • Separate the AM loop antenna from the unit. • Use an FM outdoor antenna. • Separate the antenna from other connection cables.
156 Symptom Cause/Solution Page A list of broadcasting stations is not displayed. • Connection to the network is unstable. Reconnect to the network or redo the “Network” setting in the menu. 20 , 127 For some radio stations, “Radio station server full” or “Connection down” is displayed and station cannot be connected to.
157 G Remote control unit H Symptom Cause/Solution Page The set cannot be operated with the remote control unit. • Batteries are worn out. Replace with new batteries. • Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°.
158 Specifications n Audio section • Power amplifier Rated output: Front: 50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.
159 v Numerics 2.1-channel ························································· 88 3D ··························.
160 v L Language ·························································· 132 Lch Level ··························.
LICENSE License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. n Boost http://www.
LICENSE 9. Termination. a. This License and the rights granted hereunder will terminate automatically upon any breac h by Y ou of any term of this License.
LICENSE 3. The names of its contributors may not be used to endorse or promote products derived from this software without specific prior written permission.
Dimensions Unit : in. (mm) 12 15/16 (328.5) 14 29/64 (367.0) 8 55/64 (225.0) 2 3/16 (55.5) 1 57/64 (48.0) 37/64 (14.5) 3 9/16 (90.5) 4 9/64 (105.0) 17 21/64 (440.0) 13 25/64 (340.0) 2 11/64 (55.0) 1 31/32 (50.0) 1 31/32 (50.0) 5/8 (16.0) 57/64 (22.5) Weight : 18 lbs 8 oz (8.
D&M Holdings Inc. 3520 10244 00AM V00.
Een belangrijk punt na aankoop van elk apparaat Marantz NR1604 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Marantz NR1604 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Marantz NR1604 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Marantz NR1604 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Marantz NR1604 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Marantz NR1604 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Marantz NR1604 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Marantz NR1604 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
