Gebruiksaanwijzing /service van het product CASHFLOW 126 van de fabrikant Mars
Ga naar pagina of 31
CASHFLOW ® 126 and CASHFLOW ® 129 4-WAY and 8-WAY SELECTORS USER GUIDE 25859 G3 705707044.
Published by : Mars Electronics International Eskdale Road Winnersh Triangle Wokingham, Berkshire, RG41 5AQ United Kingdom. Internet: http://www.meiglobal.com For further information on editions in other languages please write to the Technical Communications Manager at the above address.
CONTENTS Safety Summary 1 Product Identification 3 Installation 6 Acceptance & Routing 10 Product Features 11 Configuration 12 Maintenance 21 Product Su pport 22 Appendix 25 ©, Mars, Inc.
iv ©, Mars, Inc., 1998 CashFlow ® 126 and CashFlow ® 129 selectors User Guide.
SAFETY Warning Before cleaning, servicing, removing or replacing CashFlow ® units, ALWAYS SWITCH OFF or ISOLATE the ELECTRICITY SUPPLY to the host machine. Caution This guide is recommended for use by personnel trained to carry out electrical installation.
DOCUMENT GUIDE This document is for field engineers using the CashF low ® 126 and CashF low ® 129 products produced by Mars Electronics International (MEI). As an ai d to using this do cument a series of symbols are used in the text and have the following meanings: + This indicates that a useful tip or word of advice is shown here.
P R ODUCT IDENTIFICATION Mars Electronics International ( MEI) has manufactured coin mechanisms compatible with gaming and amusment machines for a number of years. Over this time the functionality of the range has been enhanced to match your needs and still maintain mechanical compatibility.
T he entry bezel and the Y-chute options can be used with either the CashF low ® 126 system or CashF low ® 129 system. The CashF low ® 126 can be supplied for fitting into a short channel, so long as the machine has suitable mounting points for the bez el and Y-chute .
The e lectrical connections and interfaces to eac h variant of CashF low ® 126 and CashF low ® 129 are ide nt ical , and are found in the same locations. (A) Machine Interface - This provides power to the validator and carries the coin inhibit signals from the machine and coin outputs to the machine.
INSTALLATION Installing or removing the CashFlow ® ® product from your machine can be done by following these simple instructions. + When installing the CashFlow ® ® 126 Front Entry product it will be fitted to an MEI Fron t Plate and the following instructions will always appl y.
CF 126 Top Entry Installation + When mounted into a short channel the product must be full y assembled and ready for use, with only the machine interface loom to be connected. q The mounting points indicated must be firml y seated into the channel and a gap of between 2-3 mm left between the reject lever and the re ject arm from the machine .
CashFlow ® 129 System Installation The system consists of a channel , Y-chute, CashFlow ® 129 validator, 8-way separator, manifold and tube collar plate. This is su pplied as a compl ete system, but should you need to replace any part of it do so only in a set sequence, starting from near the to p.
Removal of Manifold and Collar Plate q The manifold is suppor t ed in position by four lugs which slot into the side plates of the channel. It is retained there by two catches, as is the collar plate at the bottom.
ACCEPTANCE AND ROU TING When the product is successfully mounted you will need to confirm that it is set up correctly to accept good coins/tokens and direct them to w h ere you want them to go. First things first q Press and release the reject button on the machine .
PRODUCT FEATURES Th e CashFlow ® 126 and CashFlow ® 129 products have the flexibility to change certain settin gs such as varying the coin-set that it handles, or new routing for some of the coins/tokens.
CONFIGURATION Validator Interface Connector The interface to the validator from the machine is exactly the same as those which apply to the MS/ME series validators , with the exception of pin 8 of the 17-way connector Connector 1 can accept either 15 pin or 17 pin interface connectors.
Assembl ing a 22 -Way Routing Plug While the links are readily inserted into the r outing plug by hand without specialist tools, care is needed to ensure that they are fitted the correct way round, particularly with the doide version, so that the barb i n the pin engages with the recess in the plug.
Coin and token values as shown on the coin set label are expressed in the following text as channels. The relative positions of these channels and coins/tokens are shown on the table below.
Route Inhibit Connector The function of the route Inhibit Connector is to signal when specific exits, external to the product, are in a “Full” co ndition. Signals from the machine ensure that, while the “Full” condition continues, further coins/tokens directed to that exit will be re-routed to an alternative exit.
Using the Rotary Data S witch and Configuration Switches Rotary Data Switch The rotary data switch is used in conjunction with the configuration switches . By pointing the arrow in the middle of the switch, using a fine screwdriver, data can be entered into the product .
P roduct Configuration - Inhibiting coins or tokens Example:- To inhibit channel 2 (the 5p coin) on your validator follow these simple steps. 1. Switch Validator Power OFF. 2. Set 4 Way Switches to Inhibit Teach. 3. Set Rotary Switch Dial to the appropriate channel.
P roduct Configuration - Enabling coins or tokens Example:- To enable channel 2 (the 5p coin in this instance) on your validator follow these simple steps. 1. Switch Validator Power OFF . 2. Set 4 Wa y switches to Enable Teach. 3. Set Rotary Switch Dial to the appropriate channel.
P roduct Configuration - teaching a ne w token , channel 0 Example:- To Teach a Token (with standard window limits) in to channel 0 follow these simple steps. 1. Switch Validator Power OFF. 2. Set 4 Wa y switches to Token Teach. 3. Set Rotary Switch Dial to position F ( standard window limits ).
P roduct Configuration - teaching a ne w token , channel 1 Example:- To Teach a Token (with standard window limits) in to channel 1 follow these simple steps. 1. Switch Validator Power OFF. 2. Set 4 Wa y switches to Token Teach. 3. Set Rotary Switch Dial to position F (( standard window limits ).
Product Configuration - Select ing a pre-progra mmed token group to be used in channel 0 14 token groups are already programmed into the product . This feature allows a defin ed to ken group to be accepted . v NOTE: Each token group selected is automatic ally copied to channel 0 .
Product Configuration - Select ing a pre-progra mmed token group to be used in channel 1 14 token groups are already programmed into the product . This feature allows a defin ed to ken group to be accepted . v NOTE: Each token group selected is automatic ally copied to channel 1 .
Product Configuration - Chang ing the machine output mode To change the coin output interface to Fixed Binary Coded Output (B CO ) use these simple steps. For BC O mode set the rotary data switch to position C , to D for Fixed Par allel mode and F for Automatic mode.
MAINTENANCE + The practical maintenance that can be carried out is limited to cleaning the areas of the validator that the coins travel through, and the replacement of the coin entry liner if it becomes worn. All other servicing is carried out through your distributor.
Product Revision The re v ision level of the 126/12 9 product can be confirmed from a label on the left side of the product. There are two levels of digits and bar-code markings on the label, and the fi fth and sixth digits on the lower numbers indicate the product level.
PRODUCT SUPPORT In addition to the MEI offices around the world an international netwo rk of Distributors and Approved Ser vice C entres can offer you technical support and other services as well.
Helping you deliver YOUR MEI REPRESENTATIVE.
Een belangrijk punt na aankoop van elk apparaat Mars CASHFLOW 126 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mars CASHFLOW 126 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mars CASHFLOW 126 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mars CASHFLOW 126 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mars CASHFLOW 126 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mars CASHFLOW 126 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mars CASHFLOW 126 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mars CASHFLOW 126 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
