Gebruiksaanwijzing /service van het product CX-9 (2014) van de fabrikant Mazda
Ga naar pagina of 222
.
.
.
.
Black plate (5,1) CX-9_8DA3-EA-13G_Edition2 Page5 Monday , September 9 2013 4:7 PM Form No.8DA3-EA-13G T able of Contents Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. 1 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags.
Black plate (6,1) CX-9_8DA3-EA-13G_Edition2 Page6 Monday , September 9 2013 4:7 PM Form No.8DA3-EA-13G.
Black plate (7,1) 1 Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. Interior Overview ................................................. ...................... ... 1-2 Interior Equipment (V iew A) ...........
Black plate (8,1) Interior Equipment (V iew A) Door-lock knob ........................ ............... .................................................. ......... page 3-29 Power door lock switch ......................................................
Black plate (9,1) Interior Equipment (V iew B) Audio control switches ............ .................................................. ........................ page 6-50 SRS air bags ........................................... .........................
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Black plate (44,1) Seat Belt Extender If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer . This extender will be only for you and for the particular vehicle and seat.
Black plate (45,1) Do not leave a seat belt extender connected to the buckle: Leaving a seat belt extender connected to the buckle without using the seat belt is danger ous.
Black plate (46,1) Seat Belt Reminder NOTE Consult an Authorized Mazda Dealer to deactivate or r estore the belt r eminder . Though the belt r eminder can be deactivated, doing so will defeat the purpose of the system to warn the driver and the fr ont passenger in the event that their seat belts ar e not fastened.
Black plate (47,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to use them. Y ou are required by law to use a child-restraint system for children in the U.
Black plate (48,1) WARNING Use the correct size child-restraint system: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-r estraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident .
Black plate (49,1) Vehicles with a front passenger air bag have a warning label attached as shown below. The warning label reminds you not to put a rear-facing child-restraint system on the front passenger seat at any time.
Black plate (50,1) Seating a child in a child-restraint system on the front passenger seat is dangerous under certain conditions (With Driver and Front Passenger Occupant Classification System): Your vehicle is equipped with front passenger seat weight sensors.
Black plate (51,1) Never use one seat belt on more than one person at a time: Using one seat belt for mor e than one person at a time is dangerous. A seat belt used in this way cannot spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed.
Black plate (52,1) Child-Restraint System Installation Position In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular child- restraint systems: infant seat, child seat, booster seat. NOTE l Installation position is determined by the type of child-r estraint system.
Black plate (53,1) Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seats. The front passenger's seat is clearly the worst choice for any child under 12, and with rear- facing child-restraint systems it is clearly unsafe due to air bags.
Black plate (54,1) 2. If the seat in which you install a child- restraint system has a seat slide function, slide the seat as far back as possible. 3. Make sure the seatback is securely latched by pushing it bac k until it is fully locked. 4. Raise the head restraint to the top locked position.
Black plate (55,1) Anchor bracket location T ether strap position T ether strap Forward WARNING Use the tether and tether ancho r only for a child-restraint system: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous.
Black plate (56,1) q Third-Row Seats Child-Restraint System Installation The third-row seats cannot accommodate LA TCH-typ e child-restraint systems or tethers, therefore these systems must be installed on the other seat po sitions such as the second-row seat.
Black plate (57,1) NOTE Inspect this function before each use of the child-r estraint system. Y ou should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode.
Black plate (58,1) Never use a rear-facing child-restraint system in the front seat with an air bag that could deploy: Rear-facing child-restraint systems on the front seat are particu larly dangerous.
Black plate (59,1) 3. Place the child-restraint system on the seat without putting your weight on the seat and fasten the seat belt . See the manufacturer's instructions on the child-restraint system for belt routing instructions.
Black plate (60,1) WARNING Do not seat a child in a child-restraint system on the front passenger seat if the front passenger air bag deactivation indicator light does not illuminate (With Driver and .
Black plate (61,1) LA TCH Child-Restraint Systems Y our Mazda is equipped with LA TCH lower anchors for attachment of speci ally designed LA TCH child-restraint systems in the second-row seats. Both anchors must be used, otherwise the seat will bounce around and put the child in danger .
Black plate (62,1) q LA TCH Child-Restraint System Installation Procedure (Second- Row Outboard Seats) 1. Slide the second-row seat as far back as possible. 2. Make sure the seatback is securely latched by pushing it bac k until it is fully locked. 3.
Black plate (63,1) WARNING Use the tether and tether ancho r only for a child-restraint system: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.
Black plate (64,1) WARNING Use the tether and tether ancho r only for a child-restraint system: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.
Black plate (65,1) Anchor bracket position T ether strap position T ether strap Forward Essential Safety Equipment Child Restraint 2-53 CX-9_8DA3-EA-13G_Edition2 Page65 Monday , September 9 2013 4:7 PM Form No.
Black plate (66,1) Supplemental Restraint System (SRS) Precautions The front and side suppl emental restraint systems (SRS) include 6 air bags. Please verify the air bags equipped o n your vehicle by locating the “ SRS AIRBAG ” location indicators.
Black plate (67,1) If your vehicle is also equipped with a driver and front passenge r occupant classification system, refer to the Driver and Front Passenger Occupant Classification System (page 2-68) for details.
Black plate (68,1) Never use a rear-facing child-restraint system in the front seat with an air bag that could deploy: Rear-facing child-restraint systems on the front seat are particularly dangerous .
Black plate (69,1) Do not attach objects on or around the area where a si de air bag deploys: Attaching objects to the front seat in such a way as to cover the outboard side of the seat in any way is danger ous.
Black plate (70,1) Do not modify the suspe nsion: Modifying the vehicle suspension is dangerous. If the vehicle's heigh t or the suspension is modified, the vehicle will be unable to accurately detect a collision or roll-over accident resulting in incorrect or unexpected air bag deploym ent and the possibility of serious injuries.
Black plate (71,1) NOTE l When an air bag deploys, a loud inflation noise can be heard and some smoke will be r eleased. Neither is likely to cause injury , however , the textur e of the air bags may cause light skin injuries on body parts not cover ed with clothing through friction.
Black plate (72,1) Supplemental Restraint System Components Driver/Front passenger inflators and air bags Crash and roll-over sensor , and diagnostic module (SAS unit) Front seat belt pretensioner and.
Black plate (73,1) How the SRS Air Bags W ork Y our Mazda is equipped with the following types of SRS air bags. SRS air bags are designed to work together with the seat belts to help to reduce inju ries during an accident. The SRS air bags a re designed to provide furt her protection for passengers in addition to the seat belt functions.
Black plate (74,1) (With Driver and Front Passenger Occupant Classification System) In addition, the front passenger air bag is designed to only deploy in accordance with the total seated weight on the front passen ger seat. For details, refer to the driver and front passenger occupant classification system (page 2-68).
Black plate (75,1) q Curtain Air Bags The curtain air bags are mounted in the front and rear window pillars, an d the roof edge along both sides. When the air bag crash sensor s detect a side impact o.
Black plate (76,1) q Air Bag/Front Seat Belt Pr etensioner System W arning Light If the air bag/front seat belt pretensioner system is working properly , the warning light illuminates when the ignition is switched ON or after the engine is cranked. The warning light turns off after a specified period of time.
Black plate (77,1) SRS Air Bag Deployment Criteria This chart indicates the applicable SRS equipm ent that will deploy depending on the type of collision.
Black plate (78,1) Limitations to SRS Air Bag In severe collisions or roll-overs such as those described previously in “ SRS Air Bag Deployment Criteria ” , the applicable SRS air bag equipm ent will deploy . However , in some accidents, the equipment may not deploy depending on the type of collision and its severity .
Black plate (79,1) Limitations to roll-over detection: The following illustration is an example of an accident that may not be detected as a roll- over accident.
Black plate (80,1) Driver and Front Passenger Occupant Classification System í First, please read “ Supplemental Restraint System (SRS) Precautions ” (page 2-54) carefully . NOTE This system is equipped on models for the U.S., Canadian and Puerto Rican markets.
Black plate (81,1) Front passenger air ba g deactivation indicator light This indicator light illuminates to remind you that the front passenger front and side air bags and seat belt pretensioner will not deploy during a collision. If the front passenger weight sensor s are normal, the indicator light illuminate s when the ignition is switched ON.
Black plate (82,1) WARNING Do not decrease the total seated weight on the front passenger seat: When an adult or large child sits on the front passenger seat, decreasing the total seated weight on the front passenger seat requi red for air bag deployment is dangerous.
Black plate (83,1) Do not increase the total seat ed weight on the front passenger seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passenger seat is dangerou s.
Black plate (84,1) NOTE l The system r equires about 10 seconds to alternate between turning the front passenger fr ont and side air bags and seat belt pretensioner system on or off.
Black plate (85,1) Monitoring and Maintenance q Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: l Crash sensors, and diagnostic module (SAS un.
Black plate (86,1) WARNING Do not operate a vehicle with damaged air bag/seat belt pretensioner system components: Expended or damaged air bag/seat belt pretensioner system components must be replaced after any collision which caused them to dep loy or damage them.
Black plate (87,1) 3 Knowing Y our Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Advanced Keyless Entry and Start System ................................ 3-2 Advanced Keys í .....................
Black plate (88,1) Advanced Keys í The advanced keyless functions (advanced keyless entry and start system) enable the following operations while the advanced key is being carried (page 3-7). l Locking/unlocking the doors and the liftgate without operat ing the key .
Black plate (89,1) With power liftgate button Lock button Operation indicator light Auxiliary key Ke y code number plate Unlock button Power liftgate b utton Panic b utton Without power liftgate butto.
Black plate (90,1) CAUTION Ø Because the advanced key uses low-intensity radio waves, it m ay not function correctly under the following conditions: Ø The advanced key is carried with comm unication devices such as cellular phones. Ø The advanced key contacts or is cov ered by a metal object.
Black plate (91,1) q Advanced Key Maintenance CAUTION Ø Make sure the battery is installed with the correct pole facing upward. Battery leakage could occur if it is no t installed correctly.
Black plate (92,1) 3. Inser t the small, flathead screwdriver into the gap between the cover and the transmitter, and then rotate the screwdriver to detach the cover . 4. Remove the battery cap, then remove the battery . 5. Inser t a new battery with the positive pole facing up, and then cover the battery with the battery cap.
Black plate (93,1) CAUTION Ø Be careful not to allow the rubber ring shown in the figure to be scratched or damaged. Ø If the rubber ring detaches, reattach it before inserting a new battery. Rubber ring q Service If you have a problem with the advanced keyless functions, consult an Authorized Mazda Dealer .
Black plate (94,1) Starting the engine The operational range for starting the engine includes nearly the entire cabin area except for the luggag e compartment. Interior transmitter Operational range NOTE l The luggage compartment is out of the operational range, however , starting the engine may be possible.
Black plate (95,1) NOTE (W ithout theft-deterrent system) The hazard warning lights will flash once to indicate that the doors and the liftgate ar e locked. (W ith theft-deterrent system) The hazard warning lights flash when the theft deterr ent system is armed.
Black plate (96,1) l The setting can be changed so that the doors and the liftgate ar e locked automatically without pr essing the request switch (page 10-8). (Auto-lock function) A beep sound is hear d when all doors and the liftgate ar e closed while the advanced key is being carried.
Black plate (97,1) WARNING Before leaving the driver's seat, always switch the ignition to OF F, set the parking brake and make sure the shift lever is in P: It is important to switch the igni tion to OFF even if you are not removing the key from the ignition or leavi ng the vehicle.
Black plate (98,1) 1. Make sure the advanced key is being carried. 2. Occu pants should fasten their seat belts. 3. Make sure the parking brake is on. 4. Depre ss the brake pedal. 5. Put the vehicle in park (P). If you must restart the engine while the vehicle is moving, shift into neutral (N).
Black plate (99,1) NOTE l In extr emely cold weather or after the vehicle has not been driven in several days, let the engine warm up without operating the accelerator . l Whether the engine is cold or warm, it should be started without use of the accelerator .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Black plate (167,1) Driving on Uneven Road Y our vehicle' s suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when trave ling on rough/uneven roads or over speed bumps .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Black plate (222,1) Parking Sensor System The parking sensor system uses ultr asonic sensors to detect obstructions around the vehicl e while parking the vehicle in a garage or during parallel parking when the vehicle is driven at a speed of about 10 km/h (6 mph) or less.
Een belangrijk punt na aankoop van elk apparaat Mazda CX-9 (2014) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mazda CX-9 (2014) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mazda CX-9 (2014) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mazda CX-9 (2014) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mazda CX-9 (2014) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mazda CX-9 (2014) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mazda CX-9 (2014) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mazda CX-9 (2014) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
