Gebruiksaanwijzing /service van het product MT3010OM van de fabrikant Memorex
Ga naar pagina of 42
Befor e operating this pr oduct, please r ead these instructions completely . User’ s Guide 30" Wide-screen LCD Stereo HDTV* Monitor with Integrated TV T uner MT3010 * High Definition (HDTV) monitors require an optional set-top box to receive true digital high definition broadcasts.
Contents ................................................................................................................................................................................ 1 Important Safety Instructions .................................
IMPORT ANT SAFETY INSTRUCTIONS 2 Before using the unit, be sure to read all operating instructions carefully . Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.
13. LIGHTNING T o protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
1 2 3 4 5 6 7 11 10 13 12 14 8 9 1. POWER Button - Press to turn the TV on; the POWER indicator will light green and picture will appear in approximately five seconds. Press again to turn the TV of f; the Power indicator will light red. 2. CHANNEL Down Button - Press to select a lower numbered channel.
1 6 5 7 8 2 3 4 5 LOCA TION OF CONTROLS (CONTINUED) 1. HDTV IN Jacks (R/L/P R /P B /Y) 2. S IN Jacks (R/L/S) 3. A V IN Jacks (R/L/V) 4. VGA IN Jack 5. UHF/VHF Antenna Jack 6.
REMOTE CONTROL 6 16 17 18 19 20 21 22 24 23 26 25 28 29 27 1 2 3 4 5 6 7 9 8 11 10 13 12 15 14 1. RECALL Button 2. CH LOCK Button 3. TV/A V/PC Button 4. CHANNEL Up Button 5. VOLUME Down Button 6. CHANNEL Down Button 7. MTS Button 8. VIDEO MODE Button 9.
REMOTE CONTROL (CONTINUED) 7 BA TTER Y INST ALLA TION + + – – 1 Open the battery compartment cover . Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment. Replace the battery compartment cover . BA TTER Y PRECAUTIONS Follow these precautions when using batteries in this device: 1.
CABLE (CA TV)/SA TELLITE CONNECTIONS 8 This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies of fer “premium pay channels” in which the signal is scrambled.
9 OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use.
10 VCR CONNECTIONS CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
11 CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR. 2.
12 DVD CONNECTIONS 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’ s audio left and right A V IN jacks. Connect the DVD’s video OUT jack to the TV’s video A V IN jack. 2. Press the TV/VIDEO/PC button until A V appears on the TV screen and press PLA Y on the DVD to watch a DVD.
13 DVD CONNECTIONS (CONTINUED) STEREO CONNECTION 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’ s audio left and right A V IN jacks. 2. Connect a video cable from the DVD’s Y , Pb, Pr OUT jacks to the TVs A V2 DVD IN (Cr , Cb, Y) jacks.
14 HDTV CONNECTION COMPUTER CONNECTION 1. Connect the left and right audio cable from the HDTV’s Audio OUT jacks to the TV’ s HDTV left and right Audio IN jacks. 2. Connect a video cable from the Y , Pb, Pr OUT jacks to the TV’ s HDTV IN jacks. 3.
Please follow the instructions and figure below to install the unit using the supplied wall brackets and Hook Assemblies: 1. Before wall mounting the unit, you must remove the base stand as follows: a. Remove the two screws, then remove the base cover as shown in figure 1.
2. Drill four 5mm holes through the wall for each bracket, or if there is a stud behind the wall where you are putting the bracket, drill four 5mm holes through the wall and into the studs for each bracket.
17 CLOCK SETTING Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green. Press the MENU button ❷ ; the MENU screen will appear . 2 1 Press the CHANNEL UP ❶ or DOWN ❷ button until SYSTEM SETTING is selected, then press the VOLUME UP button ❸ to select it.
18 SETTING THE AIR/CABLE OPTION Set the AIR/CABLE option as follows: Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green. Press the MENU button ❷ ; the MENU screen will appear . 1 Press the CHANNEL UP ❶ or DOWN ❷ button until SYSTEM SETTING is selected, then press the VOLUME UP button ❸ to select it.
SETTING THE CHANNELS INT O MEMOR Y 19 This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory , skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’ s memory .
ADDING AND SKIPPING CHANNELS 20 After setting channels into memory , you can add or delete channels as follows: Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green.
21 SETTING F A VORITE CHANNELS Set up to ten channels into the Favorite Channel Preferences to easily access the channel. Set as follows: Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green.
22 SETTING THE SLEEP TIMER T o set the TV to turn of f after a preset amount of time, follow the steps below: Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green.
TV OPERA TION 23 Adjust the volume level by pressing the VOLUME UP ❶ or DOWN ❷ button. The volume level will be indicated on the screen by a green numerical display between 0 and 100 where 0 is the lowest setting and 100 is the loudest.
TV OPERA TION (CONTINUED) 24 MUTE RECALL Repeatedly press this button to cycle through the device(s) connected to the INPUT jacks (TV/CA TV , A V , S-VIDEO, COMPONENT , YPbPr and PC). 1 TV/A V/PC Press to select one of the following sound modes: STEREO : Select for channels that are broadcasting in stereo.
25 TV OPERA TION (CONTINUED) DISPLA Y VIDEO MODE Press to select a mode (PRESET , SOFT or USER) as set on page 29. NOTE: Y ou cannot change the audio MODE while using the Y Pb Pr or computer inputs.. 1 AUDIO MODE Press and the picture will disappear from the screen, but the sound will still be heard.
26 TV OPERA TION (CONTINUED) WIDE AUDIO AI Press the PIP/POP button to turn picture-in-picture on; press a second time to turn picture on picture (split screen) on (this will show a picture next to a picture). Press a third time to turn PIP or POP off.
WHA T IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
ON-SCREEN CONTROL ADJUSTMENTS (PICTURE) 28 Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green. Press the MENU button ❷ ; the MENU screen will appear . 1 2 1 Press the CHANNEL UP ❶ or DOWN ❷ button until VIDEO ADJUST is selected, then press the VOLUME UP button ❸ to select it.
29 ON-SCREEN CONTROL ADJUSTMENTS (SOUND) Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green. Press the MENU button ❷ ; the MENU screen will appear . 1 2 1 Press the CHANNEL UP ❶ or DOWN ❷ button until AUDIO ADJUST is selected, then press the VOLUME UP button ❸ to select it.
30 SCREEN SETTINGS Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green. Press the MENU button ❷ ; the MENU screen will appear . 1 2 1 Press the CHANNEL UP ❶ or DOWN ❷ button until SCREEN SETTING is selected, then press the VOLUME UP button ❸ to select it.
31 SCREEN SETTINGS (CONTINUED) Press the CHANNEL UP ❶ or DOWN ❷ button until SW AP is selected. T urn this option ON or OFF using the VOLUME UP ❸ or DOWN ❹ button. If set to ON, the PIP/POP screens will swap. 7 3 1 2 4 Press the CHANNEL UP ❶ or DOWN ❷ button until SCREEN MODE is selected.
SETTING V -CHIP 32 V -Chip enables parents to prevent their children from watching inappropriate material on TV . V -Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies access to programming if the program’s rating meets the limitations you select.
33 SETTING P ARENT AL CONTROL (CONTINUED) Enter the V -CHIP menu screen as described on page 32. 1 Press the CHANNEL UP ❶ or DOWN ❷ button until MP AA RA TING is selected, then press the VOLUME UP button ❸ to select it. 2 3 1 2 Press the MENU button once when finished to return to the Main menu.
34 SETTING P ARENT AL CONTROL (CONTINUED) Enter the V -CHIP menu screen as described on page 32. 1 Press the CHANNEL UP ❶ or DOWN ❷ button until TV GUIDELINES is selected, then press the VOLUME UP button ❸ to select it.
35 Enter the V -CHIP menu screen as described on page 32. 1 Press the CHANNEL UP ❶ or DOWN ❷ button until P ASSWORD SETTING is selected, then press the VOLUME UP button ❸ to select it.
36 SETTING THE ON TIMER Press the POWER button ❶ to turn on the TV ; the POWER indicator will light green. Press the MENU button ❷ ; the MENU screen will appear . 1 2 1 Press the CHANNEL UP ❶ or DOWN ❷ button until SYSTEM SETTING is selected, then press the VOLUME UP button ❸ to select it.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION POWER No power . The AC power cord is not Connect the AC power cord to connected. the AC outlet. TV BROADCAST RECEPTION TV station experiencing problems. T ry another channel. Poor or no picture. Picture control is not adjusted.
RECEPTION DISTURBANCES 38 IGNITION: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances. GHOSTS: Ghosts are caused by the television signal following two paths.
Item Characteristics Specifications LCD Panel T ype Super IPS/Super MV A Active Display Area 643.2 (H) * 385.92(V)mm (29.6” diagonal) Pixel Pitch 0.1675mm*0.5025mm*RGB Max.Resolution WXGA 1280*768 Contrast Ratio 500:1(T ypical) Brightness 500 cd/m2(T ypical) Response T ime 25ms Display Color 16.
Audio System 3D Surround Y es Amplifier 4W(10% THD max.) Speaker 10W T erminals A V1 RCA for CVBS,Audio R/L S S Din for S-Video,Audio R/L COMPONENT(Y Cb Cr) RCA for YUV and Audio R/L HDTV(Y Pb Pr) RCA.
Memcorp, Inc. Weston, FL Printed in T aiwan Visit our website at www .memorexelectronics.com.
Een belangrijk punt na aankoop van elk apparaat Memorex MT3010OM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Memorex MT3010OM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Memorex MT3010OM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Memorex MT3010OM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Memorex MT3010OM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Memorex MT3010OM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Memorex MT3010OM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Memorex MT3010OM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
