Gebruiksaanwijzing /service van het product MVR4041 van de fabrikant Memorex
Ga naar pagina of 29
1 ENGLISH VIDEO CASSETTE RECORDER VIDEOGRABADOR DE CASSETTE OWNER'S MANUAL MANUAL DE INSTRUCCIONES Before operating the unit, please read this manual thoroughly .
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 ENGLISH 3 ENGLISH 9. VENTILATION Slots and openings in the cabinet back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface.
4 EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE 19. DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged.
5 ENGLISH MOISTURE CONDENSATION DO NOT OPERATE THIS VCR FOR AT LEAST TWO OR THREE HOURS WHEN MOISTURE IN THE AIR CONDENSES ON THE VCR. WHAT IS MOISTURE CONDENSATION? When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of the glass.
6 High Quality Picture Technology - This video cassette recorder marked "HQ" incorporates VHS high quality technology. A built-in detail enhancer is used to boost the recorded signal and provide maximum picture quality in playback. It is compatible with other VHS video cassette recorders.
7 ENGLISH Automatic Repeat Play System - When the AUTO REPEAT option is turned on, this VCR will automatically play back the same cassette tape repeatedly. On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.
8 TV/VCR SPEED SLOW MENU REW REC/OTR P AUSE/STILL CHANNEL F .FWD SET ENTER STOP PLA Y 12 3 45 6 7 0 89 – TRACKING + CALL CANCEL COUNTER RESET CLOCK/ COUNTER AUDIO SELECT AUTO TRACKING TIMER REC INPUT SELECT ZERO RETURN POWER FRONT LOCA TION OF CONTROLS REMOTE CONTROL 8 23 22 4 19 1.
9 ENGLISH REAR 16. CLOCK/COUNTER selector button - Switches between the clock and the real time tape counter. 17. COUNTER RESET button - Resets the Real Time Tape Counter to 00:00:00. 18. TV/VCR selector button - Switches between TV and VCR. 19. PAUSE/STILL button - During recording, this button temporarily stops the tape.
10 OUT IN OUT IN OUT IN NOTES: • A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to the VCR properly . • For better quality recording, an indoor antenna or a telescopic antenna is not recommended.
11 ENGLISH OUT IN UHF VHF OUT IN UHF VHF OUT IN VHF/UHF IN NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode. NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode. NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode.
12 Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled.
13 ENGLISH This VCR cannot receive scrambled programs since it does not contain a descrambler . In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment.
14 OUT IN When you connect your VCR to a Stereo Component System, you can view the picture from the VCR while enjoying powerful sound from your audio system. If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher quality picture and sound.
15 ENGLISH SETTING THE VIDEO CHANNEL For a push-button TV tuner If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/ 4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder.
16 AUTOMA TIC MEMOR Y TUNING 〈 + / – /ENTER/MENU 〉 CH SET UP TV CATV AUTO CH MEMORY ADD/DELETE TO ADD/DELETE CHANNELS 1 Press the MENU button. Press the TRACKING/SET + or – button to select the CH SET UP option, then press the ENTER button.
17 ENGLISH TO REWIND OR FORWARD THE TAPE RAPIDLY Press the REW button in the STOP mode. " " will appear on the screen for about 4 seconds. The REW indicator will light in the display for about 4 seconds. When a tape is played, the Digital Auto Tracking System automatically adjusts the tracking to obtain the best possible picture.
18 RECORDING AND VIEWING THE SAME TV PROGRAM CHECK BEFORE YOU BEGIN • T urn ON the TV and set to the video channel 3 or 4. • T urn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV .
19 ENGLISH 4 Press the REC/OTR button. " ● " will appear on the screen for about 4 seconds. The REC indicator will light in the display for about 4 seconds. Press the PAUSE/STILL button to avoid recording unwanted material. Press again or press the REC/OTR button to continue the recording.
20 1 Press the MENU button. Check the TIMER REC SET option is selected, then press the ENTER button. 2 Press the TRACKING/SET + or – button to select one of the program line, then press the ENTER button. 3 Press the TRACKING/SET + or – button to select the date, then press the ENTER button.
21 ENGLISH When setting the date in step 3, press the TRACKING/ SET – button repeatedly. The setting changes as follows: Example Press the TRACKING/SET + or – button to select the TIMER REC SET option in the MENU. Then press the ENTER button to display the timer program list.
22 1 Press the CALL button to display the counter on the screen. (When loading a cassette tape, the clock will change to the counter automatically in the display .) 2 Before playback or recording, press the COUNTER RESET button to set the counter to "00:00:00".
23 ENGLISH The video heads are the means by which the VCR reads pictures from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy).
24 No picture on screen when playing back a recorded tape. Noise bars on screen. The TV is not set to the video channel 3 or 4. Tracking adjustment beyond range of automatic tracking circuit. Video heads are dirty. The tape is worn or damaged. Set to the video channel 3 or 4 or adjust the fine tuning button on your TV set.
25 ENGLISH FOR ADDITIONAL SET -UP INFORMA TION OR CUSTOMER SER VICE PLEASE CALL: 1-800-919-3647 Remote control does not work. It is not aimed at the remote sensor. Distance too far or too much light in the room. There is an obstacle in the path of the beam.
26 MEMO ................................................................................................................ ................................................................................................................ .................
27 ENGLISH ................................................................................................................ ................................................................................................................ ..............
................................................................................................................ ................................................................................................................ .........................
................................................................................................................ ................................................................................................................ .........................
Een belangrijk punt na aankoop van elk apparaat Memorex MVR4041 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Memorex MVR4041 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Memorex MVR4041 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Memorex MVR4041 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Memorex MVR4041 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Memorex MVR4041 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Memorex MVR4041 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Memorex MVR4041 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
