Gebruiksaanwijzing /service van het product 2010 C-Class van de fabrikant Mercedes-Benz
Ga naar pagina of 364
C-Class Operator’s Manual 204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.1 2009-07-16T17:54:06+02:00 - Seite 1.
Symbols Trademarks: R BabySmart TM is a trademark of Siemens Automotive Corp. R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R ESP ® is a registered trademark of Daimler. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.1 2009-07-16T17:54:06+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 20 At a glance ........................................... 25 Safety and security ............................. 35 Controls in detail .
1, 2, 3 ... 4-ETS see ETS/4-ETS 4MATIC see All-wheel drive (4MATIC) 911 Emergency calls ........................ 173 A ABS (Antilock Brake System) ............. 61 Indicator lamp ................................ 298 Messages in the multifunction display .
System settings ............................. 147 Telephone ...................................... 167 Auto-dimming rear view mirrors ........ 87 Automatic central locking .......... 74, 135 Automatic headlamp mode ................ 91 Automatic interior lighting control .
Locking/unlocking from inside ........ 75 SmartKey ......................................... 70 Central locking/unlocking switch ..... 75 Certification label .............................. 332 Children in the vehicle Air bags .........................
Resume function ............................ 183 Setting current speed .................... 181 Cup holders ........................................ 207 Curb weight ....................................... 250 Customer Assistance Center (CAC) ... 23 Customer Relations Department .
Electrical system Improper work on or modifications ................................... 22 Power outlets ................................. 210 Electrical system (Technical data) see Vehicle specification Electronic Stability Program see ESP ® Electronic Traction System see ETS/4-ETS Emergency, in case of First aid kit .
Power steering fluid ....................... 351 Washer and headlamp cleaning system ........................................... 352 Fog lamps ............................................. 92 Messages in the multifunction display .....................
Delayed shut-off ............................ 134 Halogen ......................................... 314 High-beam flasher ............................ 93 High-beam headlamps ..................... 93 Low-beam headlamps ...................... 91 Messages in the multifunction display .
Messages in the multifunction display ........................................... 286 Opening, trunk ................................. 75 Opening and closing the power tilt/sliding sunroof or the panorama roof ................................. 99 Opening and closing the windows .
M Maintenance ........................................ 21 Maintenance System Service indicator display ................ 259 Service indicator message ............. 259 Service term exceeded .................. 259 Manual headlamp mode (Low- beam headlamps) .
N Navigation system see Separate operating instructions Navi menu .......................................... 126 NECK-PRO active front head restraints ............................................. 52 Resetting ....................................... 311 Nets, parcel .
Power assistance .............................. 255 Power outlets .................................... 210 Power seats see Sea ts Power steering Messages in the multifunction display ........................................... 288 Power tilt/sliding sunroof Operation .
Satellite radio .................................... 152 Seat belt force limiter ......................... 52 Seat belts ............................................. 48 Children in the vehicle ..................... 54 Cleaning .......................
Sun visors .......................................... 208 T Tachometer .................................. 28, 117 Overspeed range ........................... 117 Tail lamps ........................................... 314 Cleaning lenses ..............
Tire inflation pressure Checking ........................................ 232 Important notes on ........................ 231 Label on the inside of fuel filler flap ................................................ 231 Placard on driver’s door B-pillar .
U Uniform Tire Quality Grading Standards .................................. 244, 252 Units Selecting speedometer display mode ............................................. 131 Unleaded gasoline, premium ........... 354 Unlocking the vehicle KEYLESS-GO .
Washer fluid ................................... 358 Wipers ............................................. 96 Windshield wipers Replacing wiper blades .................. 316 Winter driving Instructions .................................... 253 Snow chains .
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under C.
contacting you in a timely manner should the need arise. If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator.
Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: R the safety precautions in this manual R the “Technical data” section .
This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety. Daimler may access the information and share it with others R for safety .
Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 28 Multifunction steering wheel ............. 29 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Cockpit Function Page : Steering wheel gearshift control 112 ; Cruise control lever 180 = Instrument cluster 116 ? Multifunction steering wheel 118 A Horn B Front Parktronic warning indicators, Canada.
Instrument cluster Function Page : Combination gauge with: Fuel gauge 118 8 Fuel tank reserve warning lamp 304 Coolant temperature gauge 117 ? Coolant temperature warning lamp 305 Indicator/warning la.
Function Page ! Antilock Brake System (ABS) indicator lamp 61, 298 7 Seat belt telltale 51, 301 D Outside temperature (manual transmission) 118 Permanent display: Outside temperature or speedometer (a.
Function Page ? Press button % briefly: to go to the next higher menu level 120 to confirm display message 120 to cancel the Voice Control System 3 Press and hold button % to select the standard displ.
Center console Upper part Function Page : Audio display cover 139 ; Hazard warning flasher switch 93 = Alarm system indicator lamp 67 ? Front passenger front air bag off indicator lamp, USA only 42, 3.
Lower part Function Page : Ashtray 209 Cigarette lighter 209 ; Gear shift lever for manual transmission 107 Gear selector lever for automatic transmission 108 = Cup holder 207 ? Front armrest storage .
Function Page F Hands-free microphone for Tele Aid (emergency call system), telephone and Voice Control System 4 G Roadside Assistance button (Tele Aid system) 214 H Left reading lamp on/off 95 I Fron.
Function Page D Trunk opening switch 75 E Central locking switch 75 Seat adjustment, vehicles without memory function Function Page = Seat adjustment 80 34 Door control panel, seat adjustment At a glance 204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.
Vehicle equipment .............................. 36 Occupant safety .................................. 36 Panic alarm .......................................... 60 Driving safety systems ....................... 60 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
G Warning! The SRS self-check has detected a malfunction when the SRS indicator lamp 6 R does not come on at all R fails to go out after approximately 4 seconds after the engine was started R comes on.
you have any difficulties, please contact an authorized Mercedes-Benz Center. R Do not lean your head or chest close to the steering wheel or dashboard. R Keep hands on the outside of the steering wheel rim. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury when the driver front air bag inflates.
replaced and to have any malfunctioning air bags repaired. This will help to make sure the air bags will continue to provide supplemental crash protection for occupants.
Front air bags G Observe Safety notes, see page 37. Driver’s front air bag : and front passenger front air bag ; are designed to provide increased protection for the driver and front passenger against the risk of injuries to the head and thorax.
Side impact air bags G Observe Safety notes, see page 37. G Warning! The pressure sensors for side impact air bag control are located in the doors. Do not modify any components of the doors or door trim panels including, for example, the addition of door speakers.
Pelvis air bags : are designed to provide increased protection for the pelvis. Pelvis air bags : are deployed R in instances with a high rate of lateral vehicle deceleration or acceleration R on the i.
occupant weight category determined by weight sensor readings from the front passenger seat. The system does not deactivate R the front passenger side impact air bag R the pelvis air bag R the window .
If the 45 indicator lamp is not illuminated, the front passenger front air bag is activated and will be deployed R in the event of certain frontal impacts R if impact exceeds a preset deployment thres.
injured or even killed if the front passenger front air bag inflates. R If you have to place a child in a forward- facing child restraint on the front passenger seat, move the seat as far back as poss.
OCS Self-test After turning the SmartKey in the starter switch to position 1 or 2 or pressing the KEYLESS-GO start/stop button once or twice, the 45 indicator lamp illuminates.
completely eliminate this risk is to never place a child in a rear-facing child restraint in the front seat. We therefore strongly recommend that you always place a child in a rear-facing child restraint in a backseat.
If the 45 indicator lamp should not come on or is continuously lit, the system is not functioning. You must see an authorized Mercedes-Benz Center before seating any child on the front passenger seat. More information can be found in the “Practical hints” section ( Y page 307).
seat belt provide the best restraint when the wearer is in a position that is as upright as possible and the seat belt is properly positioned on the body. G Warning! Never let more people ride in the vehicle than there are seat belts available. Make sure everyone riding in the vehicle is correctly restrained with a separate seat belt.
around a person and another person or other objects at the same time. R Seat belts should not be worn twisted. In a crash, you would not have the full width of the seat belt to distribute impact forces. The twisted seat belt against your body could cause injuries.
X Push latch plate ; into buckle = until it clicks. X If necessary, adjust the seat belt to the correct height ( Y page 51). X If necessary, tighten the lap portion to a snug fit by pulling shoulder portion up. All lap/shoulder belts except the driver’s seat belt have special seat belt retractors to secure child restraints properly.
If you and/or your passenger release the seat belt during driving, the seat belt telltale 7 starts flashing and the warning chime sounds as described before.
NECK-PRO active front head restraints and/ or the deployment of the front side impact air bags or pelvis air bags. Contact an authorized Mercedes-Benz Center for availability. When the NECK-PRO active front head restraints have been triggered in an accident, the NECK-PRO active front head restraints must be reset.
Make sure: R The seat belt is always fitted snugly. R Adjust the seat belt so that the shoulder section is located as close as possible to the middle of the shoulder. R Place the lap portion of the seat belt as low as possible on your hips. Seat and head restraint G Observe Safety notes, see page 79.
Unsecured or improperly positioned cargo increases a child’s risk of injury in the event of R strong braking maneuvers R sudden changes of direction R an accident Infant and child restraint systems G Observe Safety notes, see page 54. We recommend all infants and children be properly restrained at all times while the vehicle is in motion.
infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. The infant or child restraint must be properly secured with the vehicle’s seat belt, the seat belt and top tether strap, or lower anchors and top tether strap, fully in accordance with the child seat manufacturer’s instructions.
A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint. Children too big for a toddler restraint must ride in seats using regular seat belts.
Once hook ? is attached, the child restraint itself can be secured. X Install the child restraint system and tighten top tether strap A according to the child restraint manufacturer’s instructions. After removing the child restraint system and top tether strap A : X Pull down and close anchorage ring cover ; from respective anchorage ring = .
X Install a LATCH-type (ISOFIX) child seat according to the manufacturer’s instructions. A rigid connection between the child seat and the body of the vehicle is established. X Make sure that the seat belt for the rear center seat can operate freely with a child seat installed.
Panic alarm X Activating: Press and hold ! button : for at least 1 second. An audible alarm and flashing exterior lamps will operate. X Deactivating: Press ! button : again. or X Insert the SmartKey into the starter switch. or X Press the KEYLESS-GO start/stop button.
vehicle. They cannot increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
When you release the brake pedal, the brakes function again as normal. The BAS is then deactivated. G Warning! If the BAS malfunctions, the brake system still functions, but without the additional brake boost available that the BAS would normally provide in an emergency braking maneuver.
! Vehicles with 4MATIC: Only conduct operational or performance tests on a two-axle dynamometer. If such tests are necessary, contact an authorized Mercedes-Benz Center. You could otherwise seriously damage the brake system or the transfer case which is not covered by the Mercedes-Benz Limited Warranty.
When you switch off the ESP ® , R the ESP ® will not stabilize the vehicle R the engine output is not limited, which allows the drive wheels to spin and thus cut into surfaces for better grip R the .
G Warning! Switch off ESP ® SPORT and switch on the ESP ® immediately if the aforementioned circumstances do not apply anymore. Otherwise ESP ® SPORT will only stabilize the vehicle to a limited extent when it is starting to skid or a wheel is spinning.
G Warning! Switch on the ESP ® immediately if the aforementioned circumstances do not apply anymore. Otherwise the ESP ® will not stabilize the vehicle when it is starting to skid or a wheel is spinning.
Deactivating X Switch on the ignition. i Starting the engine will also deactivate the immobilizer. In the event that the engine cannot be started (yet the vehicle’s battery is charged), the system is not operational. Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada).
i Unless you open a door or the trunk within approximately 40 seconds after unlocking the vehicle: R The vehicle will be locked again. R The anti-theft alarm system will be rearmed. Canceling the alarm To cancel the alarm, do one of the following: X Insert the SmartKey into the starter switch.
Vehicle equipment .............................. 70 Locking and unlocking ....................... 70 Starter switch positions ..................... 77 Seats .................................................... 79 Multifunction steering wheel .........
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Any unauthorized modification to this device could void the user’s authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Possibility 2 (One SmartKey in the vehicle, no SmartKey outside the vehicle): When exiting and trying to lock the vehicle, the message Key Detected in Vehicle appears in the multifunction display. The vehicle will not be locked. Factory setting X Global unlocking: Grasp an outside door handle.
X Have the SmartKey deactivated by an authorized Mercedes-Benz Center. X Report the loss of the SmartKey or the mechanical key to your car insurance company immediately. X Have the mechanical lock replaced if necessary. Any authorized Mercedes-Benz Center will be glad to supply you with a replacement.
turning at a vehicle speed of above 9 mph (15 km/h). You could therefore lock yourself out when the vehicle is pushed or towed or is on a test stand. X Switching off: Press and hold central unlocking switch : until an acoustic signal sounds. X Switching on: Press and hold central locking switch ; until an acoustic signal sounds.
A minimum height clearance of 5.9 ft (1.80 m) is required to open the trunk lid. Opening the trunk from the outside X Press and hold button F ( Y page 70) on the SmartKey until the trunk unlocks and begins to open. or X Pull on handle : . In vehicles without KEYLESS-GO: The vehicle must be unlocked.
X Briefly press emergency release button : . The emergency release button unlocks and opens the trunk while the vehicle is standing still or in motion. Illumination of the emergency release button: R The button flashes for 30 minutes after opening the trunk.
2 Ignition (power supply for all electrical consumers) and driving position 3 Starting position When you switch on the ignition, all lamps in the instrument cluster come on. The low- beam headlamp indicator lamp, high-beam headlamp indicator lamp, turn signal indicator lamps, and the indicator lamps for the fog lamps will only come on if activated.
X Insert the KEYLESS-GO start/stop button into the starter switch (if not inserted already). i Allow for 2 seconds until the system has detected the KEYLESS-GO start/stop button. X Vehicles with manual transmission: Shift the manual transmission into the neutral position (no gear selected).
this can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the seat belt would apply force at the abdomen or neck.
i AMG vehicles are equipped with a seat with an integrated head restraint. It is therefore not possible to set the height and angle of the head restraint. X Seat backrest tilt: Press the switch forward or backward in direction of arrow : . X Seat height: Press the switch up or down in direction of arrow ; .
Vehicles with memory function X Seat fore and aft adjustment: Press the switch forward or backward in direction of arrow = . X Seat backrest tilt: Press the switch forward or backward in direction of arrow ? . X Seat height: Press the switch up or down in direction of arrow ; .
The contour of the front seat backrests can be individually adjusted to provide optimum support for your back. X Switch on the ignition. X Upper back support: Use button : to adjust the upper back support to the desired position. X Lumbar region support: Use button ; to adjust the lumbar region support to the desired position.
Rear seat head restraints, removing and installing (vehicles with split foldable rear seat backrest) i The rear seat head restraints cannot be removed on vehicles which do not have the split foldable rear seat backrest. X Removing: Unlock the rear seat backrest ( Y page 204) and fold it slightly forward.
Make sure R you can reach the steering wheel with your arms slightly bent at the elbows R you can move your legs freely R all displays (including malfunction and indicator lamps) on the instrument clu.
feature, which could result in an accident and/or serious personal injury. With the easy-entry/exit feature activated, the steering wheel will return to its last set position when you close the driver’s door with the ignition switched on.
X Switch on the ignition. X Press button : for the driver’s side exterior rear view mirror or button ; for the passenger-side exterior rear view mirror. The indicator lamp in the respective button comes on. If you do not make adjustments to the selected exterior rear view mirror within 15 seconds, the indicator lamp goes out.
X Shift the automatic transmission into reverse gear R (manual transmission to reverse gear). The passenger-side exterior rear view mirror moves to the preset parking position. X Adjust the passenger-side exterior rear view mirror with adjustment button = so that you see the rear wheel and the road curb.
X Switch on the ignition. X Briefly press button : . i You need to manually fold in the mirrors once, so that the automatic fold-in function will work, see “Setting fold-in function for exterior rear view mirrors” ( Y page 136). Folding in and out manually The exterior rear view mirrors can vibrate if they are not folded out completely.
Recalling positions from memory X Press and hold desired memory position button 1 , 2 or 3 until the seat has moved to the stored position completely. On the driver’s side, also wait for the steering wheel and exterior rear view mirrors to move to the stored position.
! Failure to switch off the parking lamps when leaving the vehicle may result in a discharged battery. Low-beam headlamps The low-beam headlamps can be switched on and off with the exterior lamp switch. X Switch on the ignition. X Switching on: Turn the exterior lamp switch to position L .
In low ambient lighting conditions, the following lamps will come on additionally: R Tail lamps R Parking lamps R License plate lamps R Side marker lamps With the daytime running lamp mode activated and the engine running, you cannot switch off the low-beam headlamps manually.
Combination switch Turn signals X Press the combination switch in direction of arrow ; or ? . The corresponding turn signal indicator lamp ! or # in the instrument cluster flashes. The combination switch resets automatically after major steering wheel movements.
and R the windshield wipers have wiped the windshield with washer fluid for the first time The headlamps are cleaned every tenth time the windshield is washed with washer fluid. The counter resets when you switch off the ignition. For information on filling up the washer reservoir, see “Washer system and headlamp cleaning system” ( Y page 228).
Interior lighting in the front : v Rear interior lighting on/off ; ~ Automatic control on/off = p Right front reading lamp on/off ? c Front interior lighting on/off A p Left front reading lamp on/off B Front reading lamps C Front interior lighting Automatic control X Activating: Press button ~ .
: p Right rear reading lamp on/off ; p Left rear reading lamp on/off = Left reading lamp ? Rear interior lamp A Right reading lamp X Switching rear reading lamps on/off: Press respective reading lamp switch p . Wipers Notes ! Do not operate the wipers when the windshield is dry.
the presence of water sprayed on the windshield, and windshield wipers may be damaged as a result. ! Vehicles with rain sensor: If you have set intermittent wiping, dirt on the surface of the rain sensor or optical effects may cause the windshield wipers to wipe in an undesired fashion.
If the windshield wipers fail to function at all with the combination switch in position Ä or Å , R set the combination switch to the next higher wiper speed R have the windshield wipers checked at the nearest authorized Mercedes-Benz Center Power windows Opening and closing The door windows are opened and closed electrically.
X Switch on the ignition. X Opening/closing: Press or pull and hold switch : to ? to the resistance point. The corresponding door window moves downward or upward until you release the switch. X Express operation: Press or pull switch : to ? past the resistance point and release.
tilt/sliding sunroof have reached the desired position. The vehicle unlocks. X Release button % on the SmartKey to interrupt the opening procedure. Vehicles with panorama roof with power tilt/sliding panel When roller sunblinds are extended: X Press and hold button % on the SmartKey.
With KEYLESS-GO The SmartKey with KEYLESS-GO must be located outside the vehicle within approximately 3 ft (1 m) of a door. X Close all doors. X Touch and hold the sensor surface on an outside door handle ( Y page 71) until the door windows and the tilt/sliding sunroof or panorama roof with power tilt/sliding panel are closed completely.
Automatic transmission Gearshift pattern for automatic transmission j Park position with gear selector lever lock k Reverse gear i Neutral position h Drive position For more information, see “Automatic transmission” ( Y page 108). X Make sure the automatic transmission is in park position P .
Carry out the following steps: X If you are starting the engine with the SmartKey: Turn the SmartKey in the starter switch to position 0 and repeat the starting procedure. X If you are starting the engine with KEYLESS- GO: Close any doors that may be open to allow for better detection of the SmartKey.
The automatic central locking function can be switched off ( Y page 135). Manual transmission X Depress the brake pedal. X Fully depress the clutch pedal. ! Only shift the manual transmission into reverse gear R when the vehicle is stopped. Otherwise the manual transmission could be damaged.
X Allow the engine and coolant to cool off. X Check the coolant level and add coolant if necessary ( Y page 227). In case of accident If the vehicle is leaking fuel: X Do not start the engine under any circumstances. X Exit the vehicle at a safe distance from the roadway.
X Releasing: Pull on release handle : . When the ignition is switched on or the engine is running, the brake warning lamp $ (USA only) or J (Canada only) in the instrument cluster goes out.
Manual transmission Introduction For information on driving with a manual transmission, see “Driving and parking” ( Y page 101). G Warning! Make sure absolutely no objects are obstructing the pedals’ range of movement. Keep the driver’s footwell clear of all obstacles.
Shifting into reverse gear R ! Only shift the manual transmission into reverse gear R when the vehicle is stopped. Otherwise the manual transmission could be damaged. X Stop the vehicle completely. X Fully depress the clutch pedal. X Shift the manual transmission into the neutral position (no gear selected).
i Shifting the automatic transmission out of park position P is only possible with the brake pedal depressed. Only depressing the brake pedal releases the gear selector lever lock. i The current gear selector lever position corresponds with the current transmission position.
Effect B Park position Shift the automatic transmission into park position P only when the vehicle is stopped. The park position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always engage the parking brake in addition to shifting the automatic transmission into park position P to secure the vehicle.
Working on the vehicle G Warning! When working on the vehicle, engage the parking brake and shift the automatic transmission into park position P . Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury.
The current program mode appears in the multifunction display. : Program mode indicator You should only change the program mode when the automatic transmission is in park position P .
X Briefly press the gear selector lever to the left in the D- direction. or X Briefly pull left gearshift control : . The automatic transmission will shift into the next lower gear as permitted by the shift program. This action simultaneously limits the gear range of the automatic transmission.
Program mode selector switch on C 63 AMG C Comfort For standard driving S Sport For sporty driving M Manual For manual gearshifting The current program mode appears in the multifunction display ( Y page 112).
Upshift indicator (C 63 AMG only) In manual program mode M , upshift indicator ; in the multifunction display advises you to upshift before the engine reaches the overspeed range. Thus you can drive at the maximum engine speed for each gear without overrevving the engine.
Deactivating manual shift program X Vehicles with dynamic handling package: Press the program mode selector switch once more. The last selected automatic program mode C or S appears in the multifunction display. or X Restart the engine. The automatic transmission will go to the last selected automatic program mode ( C or S ).
R malfunction/warning messages R failure of any systems Driving characteristics may be impaired. If you must continue to drive, do so with added caution. Contact an authorized Mercedes- Benz Center as soon as possible. The language setting for the multifunction display can be changed with the audio system ( Y page 148) or with the COMAND system.
Outside temperature indicator The outside temperature indicator is displayed in the multifunction display ( Y page 120). G Warning! The outside temperature indicator is not designed to serve as an ice-warning device and is therefore unsuitable for that purpose.
Press button W X to set the volume to operate the RACETIMER 8 = Press button ? to activate the Voice Control System 9 ? Press button briefly % to cancel the Voice Control System 9 to go back to confir.
Using the control system X To select a menu: Press button = or ; . X To select a submenu: Press button : or 9 . X To go to the next higher menu level: Press button % . X To select the standard display: Press button % repeatedly until the standard display featuring the odometer and speedometer appears.
Menus and submenus Function : Trip menu ( Y page 121) ; AMG 10 menu ( Y page 123) = Navi menu ( Y page 126) ? Audio menu ( Y page 126) A Tel menu ( Y page 128) B Service menu ( Y page 129) C Settings .
X Press button % repeatedly until the standard display appears. or X Press and hold button % until the standard display appears. Fuel consumption statistics since start X Press button = or ; to select the Trip menu. X Press button : or 9 to select From Start .
Remaining driving range and current fuel consumption X Press button = or ; to select the Trip menu. X Press button : or 9 to select the estimated remaining driving range and current fuel consumption display. Note that the values are calculated based on the current fuel tank level and the current driving style.
R SETUP ( Y page 124) R RACETIMER ( Y page 124) R Overall analysis ( Y page 125) R Lap analysis ( Y page 126) SETUP X Press button = or ; to select the AMG menu.
The RACETIMER begins timing the new lap. The new lap begins to be timed as soon as the intermediate time is called up. : Gear indicator ; RACETIMER = Best lap time ? Lap number Resetting current lap X Press button W while the timer is running. The timer stops.
Lap analysis This function is only available if you have saved at least two laps and have stopped the RACETIMER. X Press button = or ; to select the AMG menu. X Press button 9 repeatedly until the lap analysis appears in the multifunction display. Each lap is shown in its own submenu.
X Switch on the audio system ( Y page 144) and select radio mode. Vehicles with COMAND system: Refer to separate COMAND system operating instructions. X Press button = or ; to select the Audio menu. The currently tuned station appears in the multifunction display.
Tel menu G Warning! A driver’s attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call.
If you press and hold button : or 9 the system scrolls rapidly through the list of names (quick search). After holding button : or 9 for a short while the scrolling speed increases. Release the button to stop the quick search. The search stops automatically at the end of the list.
operation of certain systems. They do not replace the owner’s and/or driver’s responsibility to maintain the vehicle’s operating safety. Have all required maintenance and safety checks performed on the vehicle. Bring the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages.
X Press button : or 9 to select a submenu. Scroll down with button : , scroll up with button 9 . With the selection marker on the desired submenu, use the button a to access the individual functions within that submenu.
X Press button a to change the setting. Depending on the previous setting the Display Unit Speed-/Odometer: will be set to miles or km . The selected display unit is valid for: R Odometer and trip odo.
Vehicles with COMAND system: For information on setting the time in the COMAND system, refer to the separate COMAND system operating instructions. X Press button = or ; to select the Settings menu. X Press button : or 9 to select the Time/date submenu.
X Press button a . X Press button : or 9 to select the Daytime Running Lamps: function. The current setting Enabled or Disabled is shown. X Press button a to change the current status. Depending on the previous status, the Daytime Running Lamps: mode will be Enabled or Disabled .
X Press button a to change the current status. Depending on the previous status, the Locator Lighting: function will be Enabled or Disabled . You can temporarily deactivate the headlamps delayed shut-off feature: X Before exiting the vehicle, turn the SmartKey in the starter switch to position 0 .
Activating easy-entry/exit feature Use this function to activate and deactivate the easy-entry/exit feature ( Y page 85). G Warning! You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated.
G Warning! In order to avoid distraction which could lead to an accident, the driver should enter system settings with the vehicle at a standstill and operate the system only when road and traffic conditions permit. Always pay full attention to traffic conditions first before operating system controls while driving.
The audio system consists of the following: R Audio control unit R Audio display R Audio controller with buttons k and 2 In addition, the audio system can also be operated with the multifunction steering wheel ( Y page 118).
B Keypad Tuning to a station via the station memory ( Y page 150) Storing stations manually ( Y page 151) Entering a passcode ( Y page 171) Entering a phone number ( Y page 177) Sending DTMF tones ( Y.
X Opening: Press opening button : . Audio display cover ; opens, the audio display is visible, and the audio system switched on. X Closing: Press audio display cover ; down until it engages.
Operating audio controller Audio controller : features the following options: R press briefly or press and hold W R rotate to the left or right c V d R slide to the left or right X V Y R slide up or down Z V Æ i You cannot operate the audio system via audio controller : when the display cover is closed.
Clear button X Deleting an individual digit: Briefly press button 2 . X Deleting an entire entry: Press and hold button 2 until the entry is deleted. Menu The table below shows the structure of the modes and their menus. Each mode has a basic menu. Each menu item in turn has several submenu items.
X Moving through the menu bar: Slide X V Y or rotate c V d . The currently selected item is highlighted. X Confirming the selected menu item: Press W . X Exiting the menu bar without confirming a selection: Slide Z V in the opposite direction of the list orientation.
the frequency range. Frequencies within the current frequency range, but outside the current frequency step width are rounded to the next lower allowed frequency. X Enter 1045 with the keypad on the audio control unit. The audio system tunes in to the frequency entered.
X Adjusting: Turn rotary control : . The volume will increase or decrease depending on the direction turned. Adjusting volume for telephone calls In hands-free mode, you can adjust the volume of a telephone call while the call is currently active. During a telephone call: X Turn rotary control : .
Adjusting balance and fader X Changing setting: Slide Æ V Z or X V Y until desired balance/fader setting is achieved. X Exiting menu: Press W or button k .
deviate from conventional stereo playback. SYS menu System settings menu overview Menu System Display ( Y page 147) Brightness Day Mode Night Mode Automatic Activate Bluetooth ® ( Y page 147) Reset ( Y page 147) Language ( Y page 148) Display settings You can adapt the brightness of the audio display to the prevailing light conditions.
X i Q System Q Reset . A prompt appears asking whether you really want to reset. X Select Yes or No . If you select Yes another prompt will appear asking whether you really want to reset. X Select Yes or No . If you select Yes , the audio system will be reset and restarted.
Menu Function Balance/Fader Surround Sound Switching to radio mode X Press button $ on audio control unit. The radio basic menu appears in the audio display. The radio switches to the last station you have listened to. Weather Band will automatically tune to the strongest station in the area.
Selecting a station/channel The following functions are available: R Station search function R Channel list (Weather Band/satellite radio) R Station memory (except Weather Band) R Manual frequency entry (except Weather Band/satellite radio) For using satellite radio see ( Y page 152).
X Entering frequency with keypad: Enter desired frequency with buttons k to x on the keypad in audio control unit. The audio system tunes in to the frequency entered. i It is not possible to enter a frequency in the respective wave band which is outside the frequency range.
X Press button $ on audio control unit repeatedly until desired wave band has been selected. The basic menu appears in the audio display. X Press W when the main area is active. or X Select Presets . The station memory display appears in the audio display.
satellites to broadcast 24 hours per day, coast to coast, in the contiguous U. S. and Canada. This diverse, satellite-delivered programming is available for a monthly subscription fee. For more information and service availability call the SIRIUS XM Service Center at 1-888-539-7474 ( Y page 157), or visit www.
If a satellite receiver is not installed or not properly installed: The message Device Unavailable will appear. i It is also possible to activate the satellite radio service online. To do so please visit SIRIUS XM Satellite Radio’s website at www.sirius.
X Calling up category list: $ (repeatedly, if necessary) Q Cat . or X In Sat mode, slide X V Y or rotate c V d until Cat. is highlighted and press W . The category list appears. X Selecting a category: Slide Z V Æ or rotate c V d . X Setting the selected category: Press W .
Tuning in channels using the satellite radio channel list X $ (repeatedly, if necessary) Q Sat Q Channel List . The channel list appears. The dot # in front of a list entry indicates the currently selected channel. X Select channel by rotating c V d or sliding Z V Æ .
X Selecting a preset position: Slide Z V Æ or rotate c V d . X Storing a preset position: Press and hold W until you hear a signal. The channel is stored. or X Press and hold desired channel button k to x on keypad, until a brief signal tone sounds. The channel is stored.
CD and MP3 mode Submenu overview Menu Submenu CD or MP3 Normal Track Sequence Random Tracks Random Folders (MP3 mode only) AUX Track list (Audio CD) or Folder (MP3) Select track (CD mode only) Select .
! Do not affix stickers or labels to the CDs, they can become warped due to the heat that develops in the CD drive or CD changer. In certain situations, the CDs can then no longer be ejected and cause damage to the drive. Such damage is not covered by the Mercedes-Benz Limited Warranty.
File structure on a disc When you create an MP3/WMA disc, the MP3/WMA tracks can be organized in folders. A folder can also contain other folders. A disc can contain a maximum of 255 folders. A folder can contain a maximum of 255 tracks and 255 subfolders.
R WMA Pro R 5.1 Surround Notes on copyright The music tracks that you create and play back in the MP3 and WMA format are generally subject to copyright protection in accordance with the applicable international and national regulations.
i If the audio CD is printed on one side, this side must face upwards when loaded. If neither side is printed, the side to be played must face downwards. If a CD has been inserted incorrectly or cannot be read, Disc Unreadable appears in the display. X Loading a CD: Insert CD into CD slot : .
X Press button h , or load/eject button ; ( Y page 161) on the audio control unit to finish the loading process. The CD changer plays the disc if it has been inserted correctly and is permissible. X Interrupting loading procedure: Press load/eject button ; again.
X Press desired button k to p in the keypad to select a magazine compartment. or X Slide X V Y or rotate c V d the audio controller to select the desired CD.
Example display in audio CD mode : Track number ; Track name (only if saved on the disc) = Elapsed track time ? Disc name (only if saved on the disc) A Disc number (CD changer only) B Disc type Exampl.
X h Q Folder . or X Press W when the main area is selected. The track list of the current folder appears. X Move to the superordinate folder: Select the U symbol. The display now shows the next higher folder level. X Selecting a folder: Slide Z V Æ or rotate c V d the audio controller, to select the desired folder.
vehicle may be much louder. You may need to disable these system messages or adjust the volume of these messages manually. X Selecting audio AUX mode: Press button h repeatedly until the main menu for AUX operation appears. or X In CD mode: Select CD / MP3 Q Aux .
i The functions and services available to you while using the mobile phone depend on your service provider and the type of mobile phone you are using. Also see separate operating manual of your mobile phone for instructions on how to use your mobile phone.
system. Please make sure any other Bluetooth ® device linked with the mobile phone is switched off before you use the telephone functions with the audio system. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
X Activate Bluetooth ® connection on the mobile phone (see mobile phone operating instructions). X Press button % on the audio control unit to call up the telephone mode. i On certain mobile phones, not only you will have to activate the Bluetooth ® function but in addition, your own device must be made "visible" for other devices.
i The passcode is any one- to sixteen-digit number, which you can set yourself. For the quality of coding of the connection it is recommend to use a passcode of at least four digits. You must enter the same passcode into the audio system and the device to be authorized.
X Select Options Q Details . The details screen for the device is shown in the audio display. X Closing details screen: Slide X V Y , rotate c V d or press W , or press button k . De-authorizing a Bluetooth ® device X % Q Tel Q Bluetooth Phones . X Select authorized device.
R READY indicates that a call is possible. R NO SERVICE indicates that the mobile network is not available. Setting transmit and receive volume i These settings should normally not be changed as the factory settings are matched to most mobile phones. Find out about the optimum settings for your mobile phone at an authorized Mercedes-Benz Center.
Placing a “911” emergency call with the mobile phone locked i If the mobile phone is locked, you only can make an emergency call on the mobile phone itself, without the use of the audio control unit. Phone book You can save telephone numbers in the audio system’s phone book.
X Switching from the search speller to the list: Slide Z V repeatedly. or X Select ¬ . X Switching from the list to the search speller: Press button k . Selecting an entry Selecting via search speller X If necessary, switch from the list to the search speller.
Selecting subentries X Select an entry with the symbol G from the list and press W . Symbol G changes to I and the subentries appear. : Phone book entry with subentries X Slide Z V Æ or rotate c V d the audio controller until the desired subentry is highlighted.
mobile phone and only use the audio system’s hands-free device, these calls will not be listed. Calling up the list X % Q Call Lists . X Select Calls Received or Calls Dialed . The appropriate list appears. i If there is a symbol with a telephone receiver in front of the phone number or the name, then you have missed this call (e.
X Deleting an entire entry: Press and hold button 2 until the entire entry has been deleted. or X Press button ~ . Entering phone number via the audio controller In addition to the actual menu bar, the telephone main menu features a second bar containing numbers, the number menu.
Aborting dial or ending a call X % Q ¢ and press W . or X Press button ~ on the audio control unit or on the multifunction steering wheel. Rejecting or accepting calls You will be notified of an incoming call by the ringing tone and a message on the display.
Sending DTMF tones i This function is not possible with all mobile phones. Answering machines or other devices can be controlled via DTMF tones, e.g. for remote query functions. X Transmitting individual characters: During a call select the required characters.
The “Resume” function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed.
The cruise control also switches off automatically when R the vehicle speed falls below 20 mph (30 km/h) R the ESP ® is in operation R the ESP ® is switched off with the ESP ® switch R the ESP ® h.
Setting stored speed (Resume function) G Warning! The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.
ground. Observe instructions for towing the vehicle with all wheels on the ground. ! Only conduct operational or performance tests on a two-axle dynamometer.
Parktronic system (Parking assist) This feature is only available in Canada vehicles. The Parktronic system is an electronic parking aid with ultrasonic sensors designed to assist the driver during parking maneuvers. The Parktronic system indicates the relative distance between the vehicle and an obstacle visually and audibly.
Front sensors Center approx. 40 in (100 cm) Corners approx. 24 in (60 cm) Rear sensors Center approx. 48 in (120 cm) Corners approx. 32 in (80 cm) Minimum distance Center approx.
Automatic transmission: Current transmission position Warning indicator D Front area activated R or N Front and rear area activated As your vehicle approaches an object, one or more distance segments will illuminate, depending on the distance. When the seventh distance segment illuminates, you have reached the minimum distance.
X Switch off the ignition. X Clean the Parktronic system sensors ( Y page 263). X Switch on the ignition. or X Check the Parktronic system operation at another location to rule out interference from outside radio or ultrasonic signals. Rear view camera The rear view camera is an optical parking aid.
“Cleaning the rear view camera lens” ( Y page 263). Switching on or off X Switching on: Switch on the ignition. X Make sure the rear view camera is switched on in the COMAND system. For more information refer to separate COMAND operating instructions.
Function Recommendation/Notes = Ù on/off (USA only) ( Y page 195) º Adopting driver’s side settings for all zones (Canada only) ( Y page 196) ? AC cooling on/off i Switch on/off the air conditioning. ( Y page 191) A Front defroster i Keep this setting selected only until the windshield or the side windows are clear again.
G Warning! Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others.
Activating Moist air can fog up the windows. You can dehumidify the interior air with the air conditioning. X Press button ¿ . The indicator lamp in the button comes on. i The evaporator will be vented when the air conditioning has been in use. Approximately 1 hour after locking the vehicle, the blower switches on automatically.
For best possible performance of the climate control: X Keep the air intake grille in front of the windshield free of snow, leaves, sticks, and any other debris. X Always keep all air vents and grilles in the passenger compartment free from obstruction.
: Thumbwheel ; Air vent X Opening/closing: Turn thumbwheel : clockwise or counterclockwise. Rear center console air vents : Thumbwheel for air volume control for rear center air vents ; Right rear center air vent, adjustable = Left rear center air vent, adjustable X Opening/closing: Turn thumbwheel : upward or downward.
i Keep this setting selected only until the windshield or the front door windows are clear again. X Activating: Press button ¬ . The indicator lamp in the button comes on.
i The air recirculation mode is activated automatically at high outside temperatures. The indicator lamp in button g is not lit when the air recirculation mode is switched on automatically. A quantity of outside air is added after approximately 30 minutes.
The tilt/sliding sunroof operates differently when the sunroof switch is pressed and held. See the “Closing when the tilt/sliding sunroof is blocked” section for details.
Opening X Opening manually: Press and hold the sunroof switch to the resistance point in direction of arrow ; . X Release the sunroof switch when the desired position is reached. X Express operation: To open the tilt/ sliding sunroof completely, press the sunroof switch past the resistance point in direction of arrow ; and release.
after it had been blocked two times will cause the tilt/sliding sunroof to close without any reversal function for as long as you hold the sunroof switch. Synchronizing The tilt/sliding sunroof must be synchronized after a malfunction or if it does not open smoothly.
Opening and closing the panorama roof with power tilt/sliding panel G Observe Safety notes, see page 54. G Warning! When opening or closing the tilt/sliding panel, make sure there is no danger of anyone being harmed by the opening/closing procedure. The tilt/sliding panel is equipped with the express operation and automatic reversal function.
i When the tilt/sliding panel is open, resonance noises may result in addition to the usual wind noises. They are caused by minimal pressure changes in the passenger compartment. To reduce or eliminate these noises, change the position of the tilt/ sliding panel or open a window slightly.
X Switch on the ignition. X Push and hold the roof panel switch in direction of arrow ; ( Y page 199) until the roller sunblinds are fully retracted. X Push and hold the roof panel switch in direction of arrow ; until the tilt/sliding panel is opened approximately 4 inch (10 cm).
Roof rack For information about further roof rack equipment, contact an authorized Mercedes- Benz Center. G Warning! Only use roof racks approved by Mercedes- Benz for your vehicle model to avoid damage to the vehicle. Follow the manufacturer’s installation instructions.
Use retaining hooks to secure light-weight items only. The maximum permissible weight per retaining hook is 6,6 lbs (3 kg). Split rear seat bench To expand the cargo volume, you can fold down the left and right rear seat backrests. The two sections can be folded down separately.
! Make sure that the seat belt is not pinched. X Check for secure locking by pushing and pulling on the seat backrest. X Adjust head restraints, if necessary ( Y page 83).
1 Glove box unlocked 2 Glove box locked Front armrest storage compartments i There is a small and a large storage compartment located underneath the armrest. The small storage compartment can be removed for the purpose of emptying. X Opening storage compartments: Press button : or ; .
Storage bags G Warning! Storage bags are intended for storing light- weight items only. Heavy objects, objects with sharp edges or fragile objects may not be transported in the storage bag. In an accident, during hard braking, or sudden maneuvers, they could be thrown around inside the vehicle and cause injury to vehicle occupants.
! Close the cup holder before folding the armrest upwards. Otherwise you could damage the cup holder. Sun visors G Warning! Do not use the vanity mirror while driving. Keep the vanity mirrors in the sun visors closed while vehicle is in motion. Reflected glare can endanger you and others.
X Switch on the ignition. X Extending/Retracting: Press rear window sunshade switch : briefly. Ashtrays Center console ashtray i A storage compartment is located under the ashtray insert. ! The storage compartment is not heat- proof. When smoking always make sure the ashtray insert is present and properly inserted.
X Switch on the ignition. X Open cover : ( Y page 209). X Push in cigarette lighter ; . Cigarette lighter ; will pop out automatically when hot. X Take out cigarette lighter ; . X Reinsert cigarette lighter ; in its socket after use. Power outlets The power outlets can be used to accommodate 12V DC electrical accessories (e.
Zone map North America Zone map South America X Press button = approximately 3 seconds. The currently selected zone appears in compass display ; . X Selecting zone: Press button = until the desired zone is selected. Do not press the button again until the direction is indicated.
access to account information, remote door unlock and more. The Tele Aid system is available if R it has been activated and is operational. Activation requires a subscription for monitoring services, .
1-800-FOR-MERCedes (1-800-367-6372) (USA only) or 1-888-923-8367 (Canada only). An emergency call is initiated automatically following an accident in which the Emergency Tensioning Devices (ETDs) or air bags have deployed. i An automatically initiated Tele Aid emergency call cannot be canceled.
X Terminating calls: Press button ~ on the multifunction steering wheel. or X Press the respective button for ending a telephone call on the audio system or the COMAND system. Roadside Assistance button X Press and hold Roadside Assistance button : for longer than 2 seconds.
Information button X Press and hold Information button : for longer than 2 seconds. A call to the Customer Assistance Center will be initiated. The indicator lamp in Information button : will flash while the call is in progress. The message Connecting Call will appear in the multifunction display and the COMAND system is muted.
X Contact the Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) (USA only) or 1-888-923-8367 (Canada only). You will be asked to provide your password.
and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse - does not meet current U.
garage door opener may be equipped with the “rolling code” feature. X Step 7: To program the remaining two signal transmitter buttons, repeat the steps above starting with step 3.
control, or simply for continued use as a hand-held remote control to operate the respective device in other situations. Reprogramming a single signal transmitter button To program a device using a signal transmitter button previously trained, follow these steps: X Switch on the ignition.
i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
Vehicle equipment ............................ 222 The first 1000 miles (1500 km) ....... 222 At the gas station ............................. 222 Engine compartment ........................ 224 Tires and wheels ............................... 229 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Flexible Fuel Vehicles (identified by a label reading Premium gasoline or E85 only! on the fuel filler flap): Ethanol fuel (E85) and its fumes are highly flammable, poisonous and burn easily. Ethanol fuel can cause serious injuries if ignited or if you come into contact with it or inhale fumes of it.
For more information, see also “Practical hints” ( Y page 305). X Remove the SmartKey from the starter switch. KEYLESS-GO: Open the driver’s door. This puts the starter switch in position 0 , same as with the SmartKey removed from the starter switch.
G Warning! The engine is equipped with a transistorized ignition system. Because of the high voltage it is dangerous to touch any components (ignition coils, spark plug sockets, diagnostic socket) of .
at least 5 minutes with the engine turned off R with the engine not at operating temperature, the vehicle must have been stationary for at least 30 minutes with the engine turned off Checking engine oil level X Open the hood ( Y page 224). X Pull out oil dipstick : .
C 63 AMG X Unscrew filler cap : from filler neck. X Add engine oil as required. Be careful not to overfill with oil. Be careful not to spill any oil when adding. Avoid environmental damage caused by oil entering the ground or water. ! Excess oil must be siphoned or drained off.
The coolant level is correct if the level R for cold coolant: reaches marking bar = in coolant expansion tank ; R for warm coolant: is approximately 0.6 in (1.5 cm) higher X Add coolant as required. X Screw cap : back on and tighten it. For more information on coolant, see the “Technical data” section ( Y page 351) and ( Y page 356).
The brake fluid level is correct when it is between lower mark (MIN) ; and upper mark (MAX) : of the brake fluid reservoir. Tires and wheels Safety notes Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation.
Recommended tire inflation pressure G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Important notes on tire inflation pressure G Warning! If the tire inflation pressure drops repeatedly, check the tires for punctures from foreign objects and/or whether air is leaking from the valves or from around the rim.
Example illustration: Tire inflation pressures specific to rim diameter Potential problems associated with underinflated and overinflated tires Underinflated tires G Warning! Follow recommended tire inflation pressures.
Tire and Loading Information placard on the driver’s door B-pillar ( Y page 238). If necessary, add air to achieve the recommended tire inflation pressure. X If you have overfilled the tire, release tire inflation pressure by pushing the metal stem of the valve with e.
tire blowout caused by a foreign object). In this case bring the vehicle to a halt by carefully applying the brakes and avoiding abrupt steering maneuvers.
The TPMS only functions on wheels that are equipped with the proper electronic sensors. G Warning! The TPMS does not indicate a warning for wrongly selected inflation pressures.
pressure displayed by the control system apply to sea level. In high-altitude locations, the reading on a tire pressure gauge will be higher than the reading issued by the vehicle’s control system. Do not reduce the tire inflation pressure under such circumstances.
The TPMS must be restarted when you have adjusted the tire inflation pressure to a new level (e.g. because of different load or driving conditions). The TPMS is then recalibrated to the current tire inflation pressures.
i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. This is the maximum permissible tire inflation pressure : for the tire. Always follow the recommended tire inflation pressure ( Y page 230) for proper tire inflation.
The Tire and Loading Information placard showing load limit information : is located on the driver’s door B-pillar ( Y page 238). X Locate the statement “The combined weight of occupants and cargo should never exceed XXX kilograms or XXX lbs.” on the Tire and Loading Information placard.
number and size of occupants. The following examples use a load limit of 1 500 lbs. This is for illustration purposes only. Make sure you are using the actual load limit for your vehicle stated on the vehicle’s Tire and Loading Information placard ( Y page 239).
Example 1 Example 2 Example 3 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs 1 500 lbs Example 1 Example 2 Example 3 Step 2 Number of.
Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle. You can obtain the GVWR and GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 332).
Tire care and maintenance G Warning! Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them.
Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels. Cleaning tires ! Never use a round nozzle to power wash tires. The intense jet of water can result in damage to the tire.
The safe speed on a wet, snow covered or icy road is always lower than on a dry road. You should pay particular attention to the condition of the road whenever the outside temperature is close to the freezing point.
Thoroughly clean the mounting face of wheels and brake disks, i.e. the inner side of the wheels/tires, during each rotation. Check for and ensure proper tire inflation pressure.
Letter “T” preceding the size designation: Temporary spare tires which are high pressure compact spares designed for temporary emergency use only. Tire width Tire width : indicates the nominal tire width in millimeters.
Index Speed rating H up to 130 mph (210 km/h) V up to 149 mph (240 km/h) W up to 168 mph (270 km/h) Y up to 186 mph (300 km/h) ZR...Y up to 186 mph (300 km/h) ZR.
Load identification i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. In addition to the load index, special load identification : may be molded into the tire sidewall following the letter designating the speed symbol B ( Y page 246).
Tire type code Tire type code ? may, at the option of the manufacturer, be used as a descriptive code for identifying significant characteristics of the tire.
GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle weight. The gross vehicle weight on each axle must never exceed the GAWR for the front and rear axle indicated on the certification label located on the driver’s door B-pillar.
Sidewall The portion of a tire between the tread and the bead. TIN (Tire Identification Number) Unique identifier which facilitates efforts by tire manufacturers to notify purchasers in recall situations or other safety matters concerning tires and gives purchasers the means to easily identify such tires.
Always use winter tires at temperatures below 45‡ (7†) and whenever wintry road conditions prevail. Not all M+S rated tires provide special winter performance. Make sure the tires you use show the mountain/ snowflake i marking on the tire sidewall.
Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges. G Warning! On slippery road surfaces, never downshift in order to obtain braking action.
obstacles. If there are any floormats or carpets in the footwell, make sure that the pedals still have sufficient clearance. During sudden driving or braking maneuvers, the objects could get caught between the pedals. You could then no longer brake or accelerate.
removed without putting other road users at risk R maintain a greater distance to the vehicle ahead and drive with particular care R carefully apply the brakes at the end of a trip and immediately aft.
G Warning! New vehicle brake pads and discs, and replacement brake pads and discs may take several hundred miles of driving until they provide optimum braking efficiency. Until that time, you may need to use increased brake pedal pressure while braking.
network information for your destination from any authorized Mercedes-Benz Center. Control and operation of radio transmitter Safety notes G Warning! Please do not forget that your primary responsibility is to drive the vehicle. A driver’s attention to the road must always be his/her primary focus when driving.
Maintenance service indicator message Information on maintenance work and maintenance intervals are specified in the Maintenance Booklet. Contact an authorized Mercedes-Benz Center, or visit www.mbusa.com (USA only) for additional information. The maintenance service indicator message will notify you when the next maintenance service is required.
X Switch on the ignition. The standard display of the control system appears ( Y page 121). X Press button = or ; on the multifunction steering wheel to select the Service menu. X Press button : or 9 to select ASSYST PLUS . X Press button a on the multifunction steering wheel to confirm.
To avoid paint damage, you should immediately remove: R Grease and oil R Fuel R Coolant R Brake fluid R Bird droppings R Insects R Tree resins etc. Frequent washing reduces and/or eliminates the aggressiveness and potency of the above adverse influences.
normally be done every 3 to 5 months, depending on the climate and washing detergent used. Mercedes-Benz approved Paint Cleaner should be applied if the paint surface shows signs of embedded dirt (i.e. loss of gloss). Do not apply any of these products or wax if your vehicle is parked in the sun or if the hood is still hot.
After running the vehicle through an automatic car wash, wipe any wax off of the windshield and the wiper blade inserts. This will prevent smears and reduce wiping noise which can be caused by residual wax on the windshield. Ornamental moldings X For regular cleaning and care of ornamental moldings, use a damp cloth.
Be careful not to apply wax to rear view camera lens : when waxing the vehicle. If necessary, remove the wax using the Mercedes-Benz approved Car Shampoo with plenty of water.
Light alloy wheels If possible, clean wheels once a week. X Use Mercedes-Benz approved Wheel Care, a soft bristle brush and a strong spray of water for cleaning the light alloy wheels. ! Only use acid-free cleaning materials. Acid may cause corrosion or damage the clear coat.
G Warning! Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection. Upholstery Using aftermarket seat covers or wearing clothing that have the tendency to give off coloring (e.g.
Vehicle equipment ............................ 268 Where will I find ...? .......................... 268 Vehicle status messages in the multifunction display ....................... 270 What to do if … .................................. 297 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
X Removing vehicle tool kit box: Pull tab : in direction of arrow ; and lift vehicle tool kit box C . X Remove vehicle tool kit box C from luggage bowl D . X Opening vehicle tool kit box cover: Pull tab A in direction of arrow ? and open vehicle tool kit box cover = .
Spare wheel G Observe Safety notes, see page 317. The spare wheel is located in the space underneath the trunk floor. X Removing: Open the trunk ( Y page 75). X Lift the trunk floor using the floor handle. X Engage the trunk floor handle on the upper trunk lip.
R malfunction/warning messages R failure of any systems Driving characteristics may be impaired. If you must continue to drive, do so with added caution. Contact an authorized Mercedes- Benz Center as soon as possible. On the pages that follow, you will find a compilation of the most important warning and malfunction messages that may appear.
Text messages Safety systems Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator’s Manual USA only: The front passenger front air bag is activat.
Display messages Possible causes/consequences and M Solutions classification sensed by the OCS, the 45 indicator lamp will remain illuminated or go out. If above conditions are not met, the system is not working properly. Have the system checked at an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabled See Operator’s Manual USA only: The front passenger front air bag is deactivated while driving even though an adult or someone larger than a small individual is occupying the front passenger seat.
Display messages Possible causes/consequences and M Solutions Check Child Seat Position See Operator's Manual Vehicles with BabySmart™ (Canada only): The BabySmart™ child seat is not positioned correctly. Risk of injury! X Install the BabySmart™ child seat in correct position.
Vehicle Display messages Possible causes/consequences and M Solutions P Shift to 'P' You have turned off the engine with the KEYLESS-GO start/ stop button with the automatic transmission in neutral position N and opened the driver’s door.
Display messages Possible causes/consequences and M Solutions Tire pressures will be displayed after driving a few minutes The tire inflation pressure is being checked by the Advanced TPMS. X Drive the vehicle for a few minutes. Tire Press. Monitor Inoperativ e The Advanced TPMS is malfunctioning.
Display messages Possible causes/consequences and M Solutions Correct Tire Pressure The tire inflation pressure is too low in at least one tire. or The tire inflation pressures of the individual tires differ from each other significantly. The tire inflation pressure values are shown in the multifunction display.
Symbol messages Brake Display messages Possible causes/consequences and M Solutions # Check Brake Pad Wear The brake pads have reached their wear limit.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ABS and ESC Inoperativ e See Operator’s Manual In addition, the yellow ESP ® warning lamp d and the yellow ABS indicator lamp ! come on.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ABS and ESC Currently Unavailabl e See Operator’s Manual In addition, the yellow ESP ® warning lamp d and the yellow ABS indicator lamp ! come on.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) Check Brake Fluid Level There is insufficient brake fluid in the reservoir. Risk of accident! X Stop the vehicle in a safe location or as soon as it is safe to do so.
Safety systems Display messages Possible causes/consequences and M Solutions ÷ ESC Inoperativ e See Operator's Manual In addition, the yellow ESP ® warning lamp d comes on. The brake system is still functioning normally but due to a malfunction, the BAS, the ESP ® , and the hill-start assist system are unavailable.
Display messages Possible causes/consequences and M Solutions ÷ ESC Currently Unavailabl e See Operator's Manual In addition, the yellow ESP ® warning lamp d comes on. The self-diagnosis may not be completed yet. The brake system is still functioning normally but without the BAS, the ESP ® , and the hill-start assist system available.
Display messages Possible causes/consequences and M Solutions 6 Front Right SRS Malfunctio n Service Required Components of the front passenger’s supplemental restraint system may not work properly. X Drive with added caution to the nearest authorized Mercedes-Benz Center.
Vehicle Display messages Possible causes/consequences and M Solutions N The trunk is open. X Close the trunk ( Y page 76). M You are driving with the hood open. X Stop the vehicle in a safe location as soon as it is safe to do so. X Close the hood ( Y page 225).
Display messages Possible causes/consequences and M Solutions + Close Doors To Lock Vehicle You tried to lock the vehicle but not all doors were closed. X Close doors and lock the vehicle again. + Key Does Not Belong to Vehicle The SmartKey in the starter switch does not belong to the vehicle.
Display messages Possible causes/consequences and M Solutions ¥ Check Washer Fluid The water level has dropped to approximately 1.1 US qts (1.0 l). X Add washer fluid ( Y page 228). D Power Steering Malfunctio n See Operator's Manual Power assistance for the steering system is not available.
Display messages Possible causes/consequences and M Solutions ? Coolant Low Stop Vehicle! Turn Engine Off The coolant is too hot. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Engage the parking brake.
Display messages Possible causes/consequences and M Solutions ? Coolant Low Stop Vehicle! Turn Engine Off The poly-V-belt could be broken. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions 4 Check Engine Oil At Next Refueling The engine oil has dropped to a critical level. X Check the engine oil level ( Y page 225) and add engine oil as required ( Y page 226). X If you must add engine oil frequently, have the engine checked for possible leaks.
Lamps Display messages Possible causes/consequences and M Solutions b Active Headlamps Inoperativ e The active Bi-Xenon headlamp system is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. b Check Left Reverse Lamp or Check Right Reverse Lamp The left or right backup lamp is malfunctioning.
Display messages Possible causes/consequences and M Solutions b Check Front Left Sidemarker Lamp or Check Front Right Sidemarker Lamp The front left side or right side marker lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Check Left License Plate Lamp or Check Right License Plate Lamp The left or right license plate lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. b Auto Lamp Function Inoperativ e The light sensor is malfunctioning.
Display messages Possible causes/consequences and M Solutions b Check Left Tail Lamp or Check Right Tail Lamp The left or right tail lamp is malfunctioning. X Replace the bulb as soon as possible ( Y page 313). b Check Left Tail and Brake Lamps or Check Right Tail and Brake Lamps The left or right tail lamp/brake lamp is malfunctioning.
Display messages Possible causes/consequences and M Solutions b Check Front Left Turn Signal or Check Front Right Turn Signal The left or right front turn signal lamp is malfunctioning.
G Warning! Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You may lose control of the vehicle. Continued driving with a flat tire will cause excessive heat build-up and possibly a fire. G Warning! Follow recommended tire inflation pressures.
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The ABS has detected a malfunction and switched off. The BAS, the ESP ® , and the EBP are also switched off. The brake system is still functioning normally but without the systems specified above available.
Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The ABS is temporarily not available. The ESP ® , the BAS, and the EBP are also unavailable. The self-diagnosis has not been completed yet.
Problem Possible causes/consequences and M Solutions ! d The red brake warning lamp comes on while driving. In addition, the yellow ABS indicator lamp, and the yellow ESP ® warning lamp come on and an acoustic warning sounds. The Electronic Brake Proportioning (EBP) switched off due to a malfunction.
Safety systems Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off.
i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and front passenger’s seat belt are fastened, or the vehicle is standing still and a front door is opened.
Problem Possible causes/consequences and M Solutions d å C 63 AMG only: The yellow ESP ® warning lamp and the yellow ESP OFF warning lamp come on while the engine is running.
Problem Possible causes/consequences and M Solutions d The yellow ESP ® warning lamp flashes while driving. The ESP ® or the ETS/4-ETS has come into operation because of detected traction loss in at least one tire. X When driving off, apply as little throttle as possible.
Engine Problem Possible causes/consequences and M Solutions ; The yellow engine malfunction indicator lamp comes on when the engine is running. There may be a malfunction in R the fuel management syst.
Problem Possible causes/consequences and M Solutions ? The red coolant temperature warning lamp comes on when the engine is running and an acoustic warning sounds. The coolant temperature has exceeded 248‡ (120†). X Stop in a safe location as soon as possible and allow the engine and coolant to cool down.
G Warning! Each tire, including the spare (if provided), should be checked at least once a month when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the Tire and Loading Information placard on the driver’s door B- pillar or the tire inflation pressure label on the inside of the fuel filler flap.
Problem Possible causes/consequences and M Solutions Canada only: 45 The front passenger front air bag off indicator lamp does not illuminate or does not remain illuminated with a BabySmart TM child seat properly installed on the passenger seat. The system is malfunctioning.
G Warning! If the 45 indicator lamp does not illuminate or remains out with the weight of a typical 12-month-old child in a standard child restraint or less on the front passenger seat, do not transport a child on the front passenger seat until the system has been repaired.
X Turn mechanical key ; back and remove it from the trunk lid lock. Locking the vehicle If you cannot lock the vehicle with the SmartKey or with KEYLESS-GO, lock it as follows: X Open the driver’s door. X Close the front passenger door, the rear doors, and the trunk.
Manually unlocking the gear selector lever If the vehicle’s electrical system is malfunctioning, the gear selector lever could remain locked in park position P . In this case the gear selector lever can be unlocked manually, e.g. to tow the vehicle.
X Fold the head restraint cushion by the top, back firmly until it engages : . X Repeat this procedure on the NECK-PRO active front head restraint for the second front seat. For information on NECK-PRO active front head restraints, see “NECK-PRO active front head restraints” ( Y page 52).
Replacing bulbs Safety notes Safe vehicle operation depends on proper exterior lighting and signaling to a large degree. Correct headlamp adjustment is extremely important. Have headlamps checked and readjusted at regular intervals and when a bulb has been replaced.
Bulbs You can replace the following bulbs yourself: Halogen headlamps Type : Low-beam lamp: H7 55 W ; Turn signal lamp: 3457A Bi-Xenon headlamps Type : Turn signal lamp: Turn signal lamp: 3457A Rear l.
G Observe Safety notes, see page 313. R Only use 12-volt bulbs of the same type and with the specified watt rating. R Switch the lights off before changing a bulb to prevent short circuits. R Always use a clean lint-free cloth when handling bulbs. R Your hands should be dry and free of oil and grease.
Replacing bulbs for rear lamps Before you start to replace a bulb for a rear lamp, do the following: X Switch off the ignition. X Turn the exterior lamp switch to position $ . X Open the trunk. Tail lamp unit X Driver’s side: Lift up the bottom and pull out the trim panel covering the driver side rear light.
G Warning! Wiper blades are components that are subject to wear and tear. Replace the wiper blades twice a year, preferably in the spring and fall. Otherwise the windshield will not be wiped properly. As a result, you may not be able to observe surrounding traffic conditions and could cause an accident.
not exceed a vehicle speed of 50 mph (80 km/h). Contact the nearest authorized Mercedes- Benz Center as soon as possible to have the spare wheel replaced with a regular road wheel. Never operate the vehicle with more than one spare wheel mounted. Do not switch off the ESP ® when a spare wheel is mounted.
away from the area under the lifted vehicle. Always lower the vehicle onto sufficient capacity jackstands before working under the vehicle. Always engage the parking brake firmly and block the wheels with wheel chocks or other sizeable objects before raising the vehicle with the jack.
X Place jack = on firm ground. X Position jack = under take-up bracket ; so that it is always vertical as seen from the side, even if the vehicle is parked on an incline. X Turn crank ? clockwise until jack = is fully seated in take-up bracket ; and the jack base evenly meets the ground.
Lowering the vehicle X Lower the vehicle by turning the crank counterclockwise until the vehicle is resting fully on its own weight. X Remove the jack. X Tighten the five wheel bolts evenly, following the diagonal sequence illustrated ( : to A ), until all bolts are tight.
Keep children away. Follow the instructions in this Operator’s Manual. A battery contains materials that can harm the environment if disposed of improperly. A large 12 V storage battery contains lead. Recycling of the battery is the preferred method of disposal.
Charging the battery G Warning! Never charge a battery while still installed in the vehicle unless the accessory battery charge unit approved by Mercedes-Benz is being used. Gases may escape during charging and could cause an explosion that may result in personal injury, paint damage or corrosion.
of the other vehicle, provide jump start power by an external battery or starter pack. R Jump starting should only be performed when the engine and catalytic converter are cold. R Do not jump start the engine or charge the battery if the battery is frozen.
X Connect negative terminal ? of charged battery B with negative terminal A with a jumper cable. Clamp the cable to negative terminal ? of charged battery B first. X Start engine of the vehicle with the discharged battery and run at idle speed. You can now turn on the electrical consumers.
Installing towing eye bolt Depending on whether you are towing a vehicle or you are being towed, the towing eye bolt can be screwed into threaded holes which are located behind covers on each bumper. The towing eye bolt is supplied with the vehicle tool kit, located underneath the trunk floor ( Y page 268).
Removing towing eye bolt X Loosen towing eye bolt ; by turning it counterclockwise. X Unscrew towing eye bolt ; . X Store the towing eye bolt ; and wheel wrench back into the vehicle tool kit.
X Vehicles with manual transmission: Shift the manual transmission into the neutral position (no gear selected). or X Vehicles with automatic transmission: Shift the automatic transmission into neutral position N . X Release the brake pedal. X If engaged, release the parking brake.
X Open the driver’s door. X Opening: Using your hands, pull fuse box cover : in direction of arrow = and remove in direction of arrow ; . X Closing: Hook fuse box cover : into the opening at the front. X Press fuse box cover : back on until it engages.
330 204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.1 2009-07-16T17:54:06+02:00 - Seite 330.
Vehicle equipment ............................ 332 Parts service ..................................... 332 Warranty coverage ........................... 332 Identification labels .......................... 332 Vehicle specification C 250 (204.052) ...
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
The Vehicle Identification Number (VIN) can be found R on certification label : on the driver’s door B-pillar R embossed underneath the carpet in the front passenger footwell ( Y page 333) R on the lower edge of the windshield ( Y page 333) Example certification label (U.
Vehicle specification C 250 (204.052) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. i The C 250 is available in Canada only. Engine C 250 Engine, type 272 Mode of operation 4-stroke engine, gasoline injection No.
Engine C 250 Sport Engine, type 272 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 6 Bore 3.46 in (88.00 mm) Stroke 2.69 in (68.40 mm) Total piston displacement 152.3 cu in (2 496 cm 3 ) Compression ratio 11.4:1 Output acc. to SAE J 1349 23 201 hp/6 100 rpm (150 kW/6 100 rpm) Maximum torque acc.
Engine C 250 4MATIC Total piston displacement 152.3 cu in (2 496 cm 3 ) Compression ratio 11.4:1 Output acc. to SAE J 1349 25 201 hp/6 100 rpm (150 kW/6 100 rpm) Maximum torque acc.
Engine C 250 4MATIC Sport Maximum torque acc. to SAE J 1349 181 lb-ft/ 2 900 - 5 500 rpm (245 Nm/ 2 900 - 5 500 rpm) Maximum engine speed 6 500 rpm Firing order 1-4-3-6-2-5 Poly-V-belt 2 401 mm Electrical system C 250 4MATIC Sport Alternator 14 V/150 A Starter motor 12 V/1.
Electrical system C 300 Alternator 14 V/150 A Starter motor 12 V/1.4 kW Battery 12 V/74 Ah Spark plugs, type Bosch Y 7 MPP33 Spark plugs, electrode gap 0.031 in (0.8 mm) Spark plugs, tightening torque 15 - 18 lb-ft (20 - 25 Nm) Main dimensions C 300 Overall vehicle length 182.
Electrical system C 300 Sport Alternator 14 V/150 A Starter motor 12 V/1.4 kW Battery 12 V/74 Ah Spark plugs, type Bosch Y 7 MPP33 Spark plugs, electrode gap 0.031 in (0.8 mm) Spark plugs, tightening torque 15 - 18 lb-ft (20 - 25 Nm) Main dimensions C 300 Sport Overall vehicle length 182.
Main dimensions C 300 4MATIC Overall vehicle length 182.3 in (4 630 mm) Overall vehicle width 36 79.2 in (2 012 mm) Overall vehicle height 57.0 in (1 449 mm) 37 56.9 in (1 445 mm) 38 Wheelbase 108.7 in (2 760 mm) Track, front 60.4 in (1 533 mm) 37 60.
Main dimensions C 300 4MATIC Sport Overall vehicle length 182.3 in (4 630 mm) Overall vehicle width 40 79.2 in (2 012 mm) Overall vehicle height 57.0 in (1 449 mm) Wheelbase 108.7 in (2 760 mm) Track, front 60.4 in (1 533 mm) Track, rear 60.5 in (1 536 mm) Turning circle 35.
Main dimensions C 350 Track, front 60.4 in (1 533 mm) Track, rear 60.5 in (1 536 mm) Turning circle 35.4 ft (10.8 m) Weights C 350 Roof load max. 220 lb (100 kg) Trunk load max. 220 lb (100 kg) Vehicle specification C 350 Sport (204.056) The quoted data apply only to the standard vehicle.
Weights C 350 Sport Roof load max. 220 lb (100 kg) Trunk load max. 220 lb (100 kg) Vehicle specification C 350 4MATIC (204.087) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment.
Engine C 63 AMG Engine, type 156 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 8 Bore 4.02 in (102.20 mm) Stroke 3.72 in (94.60 mm) Total piston displacement 378.8 cu in (6 208 cm 3 ) Compression ratio 11.3:1 Output acc. to SAE J 1349 47 450 hp/6 800 rpm (336 kW/6 800 rpm) Maximum torque acc.
! Using tires other than those approved by Mercedes-Benz can have detrimental effects, such as R poor handling characteristics R increased noise R increased fuel consumption Moreover, tires and rims n.
Same size tires Model C 250 49 C 250 4MATIC 49 16" wheels Rims (light alloy) Wheel offset 7 J x 16 H2 1.69 in (43 mm) All-season tires 50 205/55 R16 91H M+S Winter tires 50,51 205/55 R16 91H M+S i Model C 300 52 C 300 4MATIC 52 C 350 49 C 350 4MATIC 49 17" wheels Rims (light alloy) Wheel offset 7.
Mixed size tires Model C 250 Sport 53 C 250 4MATIC Sport 53 C 300 53 C 300 Sport 54 C 300 4MATIC 53 17" wheels Front axle Rims (light alloy) Wheel offset 7.5 J x 17 H2 1.85 in (47 mm) All-season tires 55 225/45 R17 91H M+S Rear axle Rims (light alloy) Wheel offset 8.
Model C 300 Sport 57 C 300 4MATIC Sport 57 C 350 58 C 350 Sport 57 C 350 4MATIC 58 18" wheels Front axle AMG rims (light alloy) Wheel offset 8 J x 18 H2 1.97 in (50 mm) All-season tires 59 225/40 R18 92H XL (Extra Load) M+S Rear axle AMG rims (light alloy) Wheel offset 8.
Spare wheel ! Compare the recommended tire inflation pressure for your vehicle with the tire inflation pressure on the yellow label located on the spare wheel rim.
Model Capacity Fuels, coolants, lubricants, etc. Engine with oil filter C 250 64 C 250 Sport 64 C 300 C 300 Sport 65 C 350 8.5 US qt (8.0 l) Approved engine oils C 250 4MATIC 64 C 250 4MATIC Sport 64 C 300 4MATIC C 300 4MATIC Sport 65 C 350 4MATIC 64 7.
Model Capacity Fuels, coolants, lubricants, etc. Front axle C 250 4MATIC 64 C 250 4MATIC Sport 64 0.63 US qt (0.6 l) Hypoid gear oil (SAE 85W-90) C 300 4MATIC C 300 4MATIC Sport 65 C 350 4MATIC 64 1.2 US qt (1.1 l) Rear axle C 250 64 C 250 Sport 64 1.
Model Capacity Fuels, coolants, lubricants, etc. Fuel tank All models 17.4 US gal (66.0 l) Premium unleaded gasoline (Minimum Posted Octane 91 [Avg. of 96 RON/86 MON]) C 300, all models (with automatic transmission): Flexible Fuel Vehicles (identified by a label reading Premium gasoline or E85 only! on the fuel filler flap).
Approved engine oils Engine oils are specifically tested for their suitability in our engines and durability for our service intervals. Therefore, only use approved engine oils and oil filters required for vehicles with the Maintenance System.
Air conditioning refrigerant R134a (HFC) refrigerant and special PAG lubricating oil are used in the air conditioning system. ! Never use R 12 (CFC) or mineral-based lubricating oil.
Flexible Fuel Vehicles All models of the C 300 with automatic transmission are Flexible Fuel Vehicles. Flexible Fuel Vehicles are identified by a label reading Premium gasoline or E85 only! on the fuel filler flap. These vehicles are designed to operate on premium unleaded gasoline or ethanol fuel (E85), or on any mixture of these two.
the use of quality gasoline containing additives that prevent the build-up of carbon deposits. After an extended period of using fuels without such additives carbon deposits can build up, especially o.
system checked for signs of leakage). Please make sure the mixture is in accordance with label instructions. The water in the cooling system must meet minimum requirements, which are usually satisfied by normal drinking water. If you are not sure about the water quality, contact an authorized Mercedes-Benz Center.
Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. X Use MB Windshield Washer Concentrate “MB SummerFit”.
359 204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.1 2009-07-16T17:54:06+02:00 - Seite 359.
360 204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.1 2009-07-16T17:54:06+02:00 - Seite 360.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 0712 13 Part no. 204 584 5381 Edition B 2010 É2045845381zËÍ 2045845381 204_AKB; 5; 23, en-US d2ureepe, Version: 2.11.8.1 2009-07-16T17:54:06+02:00 - Seite 362.
Een belangrijk punt na aankoop van elk apparaat Mercedes-Benz 2010 C-Class (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mercedes-Benz 2010 C-Class heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mercedes-Benz 2010 C-Class vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mercedes-Benz 2010 C-Class leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mercedes-Benz 2010 C-Class krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mercedes-Benz 2010 C-Class bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mercedes-Benz 2010 C-Class kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mercedes-Benz 2010 C-Class . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
