Gebruiksaanwijzing /service van het product 2010 E-Class Coupe van de fabrikant Mercedes-Benz
Ga naar pagina of 312
E-Class Coupé Operator’s Manual 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 1.
Symbols Trademarks: R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. R PRE-SAFE ® is a registered trademark of Daimler. R SIRIUS and related marks are trademarks of SIRIUS XM Radio Inc.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 19 At a glance ........................................... 25 Safety and security ............................. 35 Controls in detail .
A ABS (Antilock Brake System) ............. 59 Indicator lamp ................................ 261 Messages in the multifunction display ................................... 245, 246 Accessory weight .............................. 213 Accidents .......
Program mode selector switch (manual shift program) .................. 109 Shifting procedure ......................... 104 Steering wheel gearshift control .... 108 Transmission position indicator ..... 105 Transmission positions .................. 105 AUX socket .
Climate control see Climate control system Climate control system .................... 152 Air conditioning ............................. 158 Air conditioning refrigerant ............ 303 Air distribution ............................... 161 Air recirculation mode .
Messages in the multifunction display ........................................... 232 Multifunction display ..................... 114 Symbol messages .......................... 244 Text messages ............................... 234 Trip computer ......
Emergency calls Tele Aid .......................................... 176 Emergency operations Remote door lock (Tele Aid) ........... 179 Remote door unlock (Tele Aid) ....... 179 Trunk lid, emergency release ........... 77 Emergency Tensioning Device see ETD Emission control .
Fuels, coolants, lubricants etc. ........ 301 Fuel tank Capacity ........................................ 302 Fuel filler flap and cap ................... 187 Refueling ........................................ 186 Fuses ...............................
Infant and child restraint systems see Children in the vehicle Inflation pressure see Tires, Inflation pressure Inside door handle .............................. 74 Instrument cluster ...................... 28, 110 Illumination .......................
Engine malfunction ........................ 267 ESC .......................................... 29, 265 ESC OFF ........................................ 265 Fog lamps ........................................ 89 Front passenger front air bag off .......
ATTENTION ASSIST ........................ 249 Automatic transmission .................................. 240 Backrests .............................. 249, 250 Battery ................................... 241, 254 Brake fluid ............................
P Paintwork, cleaning .......................... 224 Paintwork code ................................. 295 Panic alarm .......................................... 58 Panorama roof with power tilt/ sliding panel ...................................... 165 Cleaning .
Rear lamps see Ta il lamp s Rear side window Override switch ................................ 57 Rear view camera .............................. 149 Cleaning the camera lens .............. 226 Rear window defroster ..................... 164 Recommended tire inflation pressure .
Selective setting (KEYLESS-GO) ....... 73 Selective setting (SmartKey) ............ 71 Shelf below rear window, cleaning .. 228 Side impact air bags ........................... 40 Side marker lamps Cleaning lenses ............................. 225 Messages in the multifunction display .
Stolen Vehicle Recovery Services .. 179 System self-test ............................. 175 Telephone Answering/ending a call ................ 118 Hands-free microphone ................... 33 Menu ............................................. 118 Operation .
Tread depth (tires) .................... 206, 215 Treadwear .......................................... 207 Treadwear indicators (tires) .... 206, 215 Trip menu ........................................... 115 Trunk Closing .............................
Weights (vehicle) see Vehicle specification Wheel Changing ....................................... 279 Removing ....................................... 282 Spare ............................................. 279 Tightening torque .....................
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under C.
contacting you in a timely manner should the need arise. If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator.
Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: R the safety precautions in this manual R the “Technical data” section .
This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety. Daimler may access the information and share it with others R for safety .
24 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 24.
Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 28 Multifunction steering wheel ............. 30 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Cockpit Function Page : Steering wheel gearshift control 107 ; Cruise control lever 128 DISTRONIC PLUS lever 134 = Instrument cluster 110 ? Multifunction steering wheel 112 A Horn B Front Parktronic w.
Instrument cluster i Please refer to the overview of the indicator and warning lamps ( Y page 29). Function Page : Fuel gauge 112 ; Speedometer = Cruise control speed segments 128 DISTRONIC PLUS segme.
Indicator and warning lamps Function Page : ESC OFF warning lamp 265 ; Front fog lamps indicator lamp 90 = Rear fog lamp indicator lamp 90 ? Left turn signal indicator lamp 90 A ESC warning lamp 265 B.
Multifunction steering wheel Function Page : Multifunction display 114 ; Press button ~ : to end a call 119 to reject an incoming call 119 Press button 6 : to answer a call 118 to dial 2 119 to redial 2 119 Press button W or X to set the volume Press button 8 to mute.
Function Page Press button a : to confirm selection or message 113 to switch to the phone book 2 118 to dial a selected phone number 2 119 2 Function only available in telephone menu. Multifunction steering wheel 31 At a glance 207_AKB; 2; 35, en-US d2ureepe, Version: 2.
Center console Function Page : Hazard warning flasher switch 92 ; Alarm system indicator lamp 66 = Front passenger front air bag off indicator lamp 42, ? Electronic Stability Control system (ESC) swit.
Overhead control panel Function Page : Rear interior lighting on/off 93 ; Interior lighting control 93 = Right reading lamp on/off 93 ? Roof panel switch 165 A Information button (Tele Aid system) 178.
Door control panel Function Page : Memory function (for storing seat, exterior mirror and steering wheel settings) 86 ; Seat adjustment 81 = Central locking/unlocking switch 75 ? Inside door handle 74.
Vehicle equipment .............................. 36 Occupant safety .................................. 36 Panic alarm .......................................... 58 Driving safety systems ....................... 58 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
G Warning! The SRS self-check has detected a malfunction when the SRS indicator lamp 6 R does not come on at all R fails to go out after approximately 4 seconds after the engine was started R comes on.
you have any difficulties, please contact an authorized Mercedes-Benz Center. R Do not lean your head or chest close to the steering wheel or dashboard. R Keep hands on the outside of the steering wheel rim. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury when the driver front air bag inflates.
must be replaced. Their anchoring points must also be checked. Only use seat belts installed or supplied by an authorized Mercedes-Benz Center. R Air bags and pyrotechnic Emergency Tensioning Devices (ETDs) contain perchlorate material, which may require special handling and regard for the environment.
Front air bags G Observe Safety notes, see page 37. Driver’s front air bag : and front passenger front air bag ; are designed to provide increased protection for the driver and front passenger against the risk of injuries to the head and thorax.
doors create a risk of rendering the side impact air bags inoperative or causing unintended air bag deployment. Work on the doors must therefore only be performed by qualified technicians.
will deploy independently of the empty seat. Whether a seat belt is recognized as fastened depends on whether or not the latch plate is properly inserted into the buckle. Pelvis air bags : are not deployed in side impacts which do not exceed the system’s deployment threshold.
lamp as an indication of whether or not the front passenger is properly positioned. G Warning! If the 45 indicator lamp illuminates when an adult or someone larger than a small individual is in the front passenger seat, have the front passenger reposition himself or herself in the seat until the 45 indicator lamp goes out.
seat recommended for the size and weight of the child. The infant or child restraint must be properly secured with the vehicle’s seat belt, the seat belt and top tether strap, or lower anchors and top tether strap, fully in accordance with the child seat manufacturer’s instructions.
sufficient severity to deploy the driver front air bag 45 indicator lamp : will be illuminated, except with the SmartKey removed from the starter switch or with the starter switch in position 0 .
states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is not the case, all vehicle occupants should have their seat belts fastened whenever the vehicle is in motion.
seat belt force limiters, and front seat knee bolsters. The system is designed to enhance the protection offered to properly belted occupants in certain frontal (front air bags, driver’s side knee bag, and ETDs) and side (side impact air bags, pelvis air bags, window curtain air bags, and ETDs) impacts which exceed preset deployment thresholds.
the size and weight of the child. For additional information, see “Children in the vehicle”. A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.
upper body automatically as necessary ( Y page 49). X If necessary, tighten the lap portion to a snug fit by pulling shoulder portion up. All lap/shoulder belts except the driver’s seat belt have special seat belt retractors to secure child restraints properly.
After a vehicle standstill, the warning chime is reactivated and the seat belt telltale 7 is flashing again if the vehicle speed once exceeds 15 mph (25 km/h).
the BAS PLUS ( Y page 60) or the PRE- SAFE ® Brake ( Y page 63) is strongly engaging R when the radar sensors recognize the immediate risk of collision in certain situations (vehicles with DISTRONIC PLUS) R critical dynamic driving situations, e.
Contact an authorized Mercedes-Benz Center for availability. When the NECK-PRO active front head restraints have been triggered in an accident, the NECK-PRO active front head restraints must be reset. Otherwise, the NECK-PRO active front head restraints cannot offer any additional protection in the event of another rear-end collision.
Seat and head restraint G Observe Safety notes, see page 80. X Position seat = and head restraint properly. See ( Y page 81) for seat and head restraint adjustment.
Infant and child restraint systems G Observe Safety notes, see page 53. We recommend all infants and children be properly restrained at all times while the vehicle is in motion. All lap/shoulder belts except the driver’s seat belt have special seat belt retractors for secure fastening of child restraints.
Children can be killed or seriously injured by an inflating air bag. Note the following important information when circumstances require you to place a child in the front passenger seat: R Your vehicl.
Installation of infant and child restraint systems G Observe Safety notes, see page 53. G Warning! Always lock the seat backrests in their upright position when the rear seats are occupied by passengers. Lock the seat backrests in their upright position before installing top tether straps or when the extended cargo compartment is not in use.
Child seat anchors – LATCH-type (ISOFIX) G Observe Safety notes, see page 53. G Warning! Children too big for a toddler restraint must ride in seats using regular seat belts.
X Deactivating: Press override switch : again. Indicator lamp ; goes out. The rear side windows can be operated again using the respective switch located in the rear side trim panels. For more information on power windows, see the “Controls in detail” section ( Y page 95).
Safety notes G Warning! The following factors increase the risk of accidents: R Excessive speed, especially in turns R Wet and slippery road surfaces R Following another vehicle too closely The driving safety systems described in this section cannot reduce these risks or prevent the natural laws of physics from acting on the vehicle.
BAS G Observe Safety notes, see page 59. The Brake Assist System (BAS) operates in emergency situations. If you apply the brakes very quickly, the BAS provides full brake boost automatically, thereby potentially reducing the braking distance. X Apply continuous full braking pressure until the emergency braking situation is over.
X Keep constant pressure on the brake pedal until the emergency braking situation is over. During this process, the ABS prevents the wheels from locking up.
ESC G Observe Safety notes, see page 59. The Electronic Stability Control (ESC) is operational as soon as the engine is running. It monitors the vehicle’s traction (force of adhesive friction between the tires and the road surface) and handling. The ESC recognizes that the vehicle deviates from the direction of travel as intended by the driver.
G Warning! Switch on the ESC immediately if the aforementioned circumstances do not apply anymore. Otherwise the ESC will not stabilize the vehicle when it is starting to skid or a wheel is spinning.
When the driver and front passenger have fastened their seat belts, the PRE-SAFE ® Brake can also R brake the vehicle within a speed range of up to 124 mph (200 km/h) automatically R activate prevent.
your current speed is so close that the PRE- SAFE ® Brake will not be capable of slowing the vehicle sufficiently. When the danger of a collision still persists and you do not brake or accelerate significantly, the PRE-SAFE ® Brake may initiate full application of the brakes automatically.
i The PRE-SAFE ® Brake will remain passive while DISTRONIC PLUS is switched on ( Y page 130). After a hard collision or damage to the front of the vehicle from an accident, have the settings and operation of the radar sensors checked by an authorized Mercedes-Benz Center.
i If the alarm stays on for more than 30 seconds, the Tele Aid system initiates a call to the Customer Assistance Center automatically. The Tele Aid system will initiate the call provided that R you h.
68 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 68.
Vehicle equipment .............................. 70 Locking and unlocking ....................... 70 Starter switch positions ..................... 78 Seats .................................................... 80 Multifunction steering wheel .........
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
R The vehicle could be inadvertently unlocked if the SmartKey is within 3 ft (1 m) of the vehicle and - an outside door handle is splashed with water or - you attempt to clean an outside door handle R Remember that the engine can be started by anyone with a SmartKey that is left inside the vehicle.
i You can obtain the required batteries at any authorized Mercedes-Benz Center. i If the batteries are checked within signal range of the vehicle, pressing button & or % will lock or unlock the vehicle accordingly.
Fix whatever is affecting the window before trying to shut the door. Automatic central locking The doors and the trunk lock automatically when the vehicle is set into motion. You can open a locked door from the inside. Open door only when conditions are safe to do so.
Opening the trunk G Warning! Make sure the trunk is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death. ! When you open the trunk, the trunk lid swings open upwards.
X Lower the trunk lid using handle : or ; . X Close trunk lid with hands placed flat on trunk lid. Trunk lid emergency release The trunk lid can be opened from inside the trunk with the emergency release button. X Briefly press emergency release button : .
Starter switch positions SmartKey G Observe Safety notes, see page 53. Starter switch g For removing SmartKey (gear selector lever must be in park position P ) 1 Power supply for some electrical consumers, e.
the SmartKey is in the vehicle, the vehicle’s electrical systems can be switched on or the engine can be started using the KEYLESS-GO start/stop button. : KEYLESS-GO start/stop button ; Starter switch X Insert the KEYLESS-GO start/stop button into the starter switch (if not inserted already).
Seats Safety notes G Warning! In order to avoid possible loss of vehicle control the following must be done before the vehicle is put into motion: R seat adjustment R head restraint adjustment R steering wheel adjustment R rear view mirror adjustment R fastening of seat belts G Warning! Do not adjust the driver’s seat while driving.
Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. Seat adjustment ! When moving the seats, make sure there are no items in the footwell or behind the seats. Otherwise, you could damage the seats and/or the items.
Lock Seat Backrest Front Left is displayed in the multifunction display, then the respective seat backrest is not engaged in its lock. Carefully slow down, and drive with caution to an area which is in a safe distance from the roadway.
X Switch on the ignition. X Switching on: Press seat ventilation switch : . Three blue indicator lamps in seat ventilation switch : come on. X Press seat ventilation switch : repeatedly until the desired ventilation level is set. X Switching off: Press seat ventilation switch : repeatedly until all indicator lamps go out.
Steering wheel adjustment X Adjusting steering wheel up or down: Move stalk in direction of arrows : . X Adjusting steering wheel in or out: Move stalk in direction of arrows ; . i The memory function ( Y page 86) lets you store the settings for the steering wheel together with the settings for the seat position and the exterior rear view mirrors.
The crash-responsive exit aid can only be triggered when the easy-entry/exit feature is activated via the control system. Mirrors Notes Adjust the interior and exterior rear view mirrors before driving so that you have a good view of the road and traffic conditions.
you may not be able to observe traffic conditions and could cause an accident. Exterior rear view mirror parking position To assist during parking maneuvers, you can set the passenger-side exterior rear view mirror so that you can see the rear wheel and the road curb.
Each memory position button on the driver’s side can store all of the following settings: R Seat position R Steering wheel position R Exterior rear view mirrors’ position G Warning! Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle.
5 T Parking lamps 5 6 L Low-beam headlamps or high-beam headlamps 7 R Vehicles without front fog lamps: Rear fog lamp 7 N Vehicles with front fog lamps: Front fog lamps 8 R Vehicles with front fog lam.
When ambient light is bright: When the SmartKey is in starter switch position 1 or when the KEYLESS-GO start/stop button has been pressed once, all lamps are off. When the engine is running, the daytime running lamps 6 come on automatically. When the low-beam headlamps are switched on, the green indicator lamp L in the instrument cluster comes on.
Regulations regarding permissible lamp operation. X Switch on the ignition. X Turn the exterior lamp switch to position T or L ( Y page 87). Vehicles with front fog lamps X Switching on front fog lamps: Pull out the exterior lamp switch to first stop ( Y page 87).
Adaptive Highbeam Assist The Adaptive Highbeam Assist is only available in vehicles with Bi-Xenon headlamps. Depending on the driving and traffic situation, low-beam leveling and the high-beam headlamps are controlled via an optical sensor. The sensor is located on the front of the overhead control panel.
Hazard warning flasher The hazard warning flasher can be switched on at all times, even with the SmartKey removed from the starter switch. The hazard warning flasher comes on automatically when an air bag deploys. X Switching on: Press hazard warning flasher switch : .
The corner-illuminating lamps will come on automatically depending on the steering angle, even if you did not switch on either turn signal. If the corner-illuminating lamps came on automatically, they will also go out automatically depending on the steering angle and vehicle speed.
Switching off: X Press hazard warning flasher switch ( Y page 92). or X Unlock the vehicle with the SmartKey. Wipers Notes ! Do not operate the wipers when the windshield is dry. Dust that accumulates on a windshield might scratch the glass and/ or damage the wiper blades when wiping occurs on a dry windshield.
Intermittent wiping will be continued when all doors are closed and R the automatic transmission is in drive position D or reverse gear R or R the wiper setting is changed using the combination switch Single wipe X Press the combination switch briefly in direction of arrow B to the resistance point.
The windows operate differently when the switch is pulled and held. See the “Closing when a window is blocked” section in this chapter for details.
If the window is blocked again and opens slightly: X Immediately after the window was blocked, pull and hold the respective switch upward until the window is fully closed.
there is no danger of anyone being harmed by the closing procedure. If potential danger exists, proceed as follows: R Release button & to stop the closing procedure.
carpets in the footwell, make sure the pedals still have sufficient clearance. During sudden driving or braking maneuvers the objects could get caught between or under the pedals. You could then no longer brake or accelerate. This could lead to accidents and injury.
You can start your vehicle without the SmartKey in the starter switch using the KEYLESS-GO start/stop button. The SmartKey must be located in the vehicle. KEYLESS-GO start/stop button : USA only ; Canada only X Make sure the KEYLESS-GO start/stop button is inserted in the starter switch ( Y page 78).
Driving off G Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle’s ABS will not prevent this type of loss of control. ! Do not run a cold engine at high engine speeds.
X Give very little gas. X Have the problem checked at an authorized Mercedes-Benz Center as soon as possible. The coolant temperature is above 248‡ (120†) The coolant is too hot and is no longer cooling the engine. X Stop the vehicle in a safe location as soon as possible.
X Releasing: Pull on release handle : . When the ignition is switched on or the engine is running, the brake warning lamp $ (USA only) or J (Canada only) in the instrument cluster goes out.
! Allow the engine to warm up under low load use. Do not place full load on the engine until the operating temperature has been reached. Avoid spinning of a drive wheel for an extended period when driving off on slippery road surfaces.
R the position of the accelerator pedal R the vehicle speed With drive position D selected, you can influence transmission shifting by R limiting the gear range R extending the gear range R changing t.
Effect A Neutral position No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). To avoid damage to the transmission, never shift the automatic transmission into neutral position N while driving.
Automatic shift program Program mode selector switch C Comfort For comfort driving S Sport For sporty driving For selecting automatic program mode ( C or S ) on vehicles with dynamic handling package, see “Dynamic handling package with sport driving mode” ( Y page 143).
in manual program mode M , see “Manual shift program” ( Y page 108). Steering wheel gearshift control (example illustration) i You cannot shift with the steering wheel gearshift control when the automatic transmission is in park position P , neutral position N , or reverse gear R .
smoothness from automatic program mode S . In manual program mode M , system- controlled automatic gearshifting is switched off. You need to change the gears by manually upshifting or downshifting using the gear selector lever or the steering wheel gearshift control.
i When you brake or stop, the automatic transmission shifts down into a gear from which you can easily accelerate or take off. Kickdown You can also use the kickdown while driving in manual program mode M when you want maximum acceleration. X U.S. vehicles: Fully depress the accelerator pedal.
Activating the instrument cluster The instrument cluster is activated when you R open the driver’s door R switch on the ignition R switch on the exterior lamps Adjusting the instrument cluster illumination X To brighten illumination: Turn dimmer : clockwise.
Fuel gauge The fuel gauge is on the left-hand side of the instrument cluster ( Y page 28). Once the fuel level has fallen below the reserve mark, the yellow fuel tank reserve warning lamp 8 for the fuel reserve comes on. Control system Introduction The control system is activated as soon as the starter switch is in position 2 .
A Press button ; = to call up line for menus and to select menus Press button briefly 9 : to select submenu or scroll through lists within Audio menu to select previous or next track, scene or stored .
Multifunction display : Text field ; Line for main menus = Outside temperature indicator/additional speedometer ? Automatic transmission program mode indicator A Transmission position/gear range indicator Settings, functions, submenus as well as any malfunctions appear in the text field.
Trip menu In the Trip menu, you can show an additional display for the speedometer and call up or reset your vehicle’s statistical data. The following information is available: R Standard display ( .
= Average speed since last reset ? Average fuel consumption since last reset The fuel consumption statistics since last reset reset automatically to 0 after 99 999 miles or 9 999 hours, whichever occurs first.
instructions appear in the multifunction display. Please refer to separate COMAND system operating instructions for instructions on how to activate the route guidance system. Audio menu The functions in the Audio menu operate the audio equipment which you have currently switched on.
X Selecting next or previous track: Press button : or 9 briefly. X Selecting a track from the track list (quick search): Press and hold button : or 9 . The current track does not appear during Audio AUX mode operation. Operating video DVD X Switch on the COMAND system and select DVD-Video.
X Press button 6 . You have answered the call. The caller’s number appears only if it is transmitted. The caller’s name appears only if the number and the name are stored in the phone book. Ending a call or rejecting an incoming call X Press button ~ .
X Press button : or 9 to select the desired number or name. X Press button 6 or a . The control system dials the selected phone number. Assistance menu In the DriveAssist menu, you can change the settings of your driving systems.
messages that may be stored in the system. Such messages appear in the multifunction display and are based on conditions or system status the vehicle’s system has recorded. G Warning! Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed.
Submenus in the Settings menu X Press button = or ; to select the Sett. menu. X Press button : or 9 to select a submenu. Scroll down with button : , scroll up with button 9 . With the selection marker on the desired submenu, use the button a to access the individual functions within that submenu.
X Press button a to change the setting. Depending on the previous setting the Display Unit Speed-/Odometer: will be set to miles or km . The selected display unit is valid for: R Odometer and trip odo.
In low ambient light conditions the following lamps will come on additionally: R Low-beam headlamps R Parking lamps R Tail lamps R License plate lamps R Side marker lamps For more information on the daytime running lamp mode, see ( Y page 89).
X Press button a to change the current status. Depending on the previous status, the Locator Lighting: function will be Enabled or Disabled . You can temporarily deactivate the headlamps delayed shut-off feature: X Before exiting the vehicle, turn the SmartKey in the starter switch to position 0 .
X Press button a to change the current status. Depending on the previous status, the Automatic Door Lock: feature will be Enabled or Disabled . Switching the radar sensors on or off If your vehicle is equipped with DISTRONIC PLUS it is equipped with a radar sensor system which you can switch on or off.
G Warning! You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated. To stop steering wheel movement, move steering wheel adjustment stalk or press one of the memory position buttons.
Cruise control The cruise control maintains the speed you set for your vehicle automatically. The use of the cruise control is recommended for driving at a constant speed for extended periods of time. The currently set speed or last set speed (“Resume” function) appears in the multifunction display for approximately 5 seconds.
the grade eases, the set speed will be resumed. On downhill grades, the cruise control maintains the set speed by braking with the vehicle’s brake system. In addition, on longer downhill grades the automatic transmission will downshift automatically.
X Increasing: Briefly lift the cruise control lever up past the resistance point in direction of arrow : . X Decreasing: Briefly press the cruise control lever down past the resistance point in direction of arrow ; . X Release the cruise control lever.
It is the driver’s responsibility at all times to be attentive to the road, weather and traffic conditions. Additionally, the driver must provide the steering, braking and other driving inputs necessary to remain in control of the vehicle. High-frequency sources such as toll stations, speed measuring systems etc.
Always obey applicable speed limits. Do not use the DISTRONIC PLUS if you are driving on a road with steep uphill or downhill slopes. When traveling in Canada in a vehicle not registered in Canada, you must switch off the radar sensor system ( Y page 126).
when the necessary distance to the vehicle ahead is again established. G Warning! An intermittent warning sounds and the distance warning lamp · in the instrument cluster is illuminated if the DISTRO.
= Preset distance threshold to the preceding vehicle ? Preceding vehicle, if detected DISTRONIC PLUS deactivated When the DISTRONIC PLUS is deactivated, you will see the following display in the multifunction display.
Switching on while driving You can switch on the DISTRONIC PLUS when the vehicle speed is above 20 mph (30 km/h). Below 20 mph (30 km/h) , you can only switch on the DISTRONIC PLUS if the preceding vehicle has been detected and is shown in the multifunction display.
will no longer brake your vehicle. You are always responsible for maintaining a distance from other vehicles, observing road speeds and braking well in advance.
Setting the current speed X Accelerate or decelerate to the desired speed. X Briefly lift the DISTRONIC PLUS lever in direction of arrow : or depress in direction of arrow ; ( Y page 134). The current speed is set. X Remove your foot from the accelerator pedal.
X Briefly pull the DISTRONIC PLUS lever in direction of arrow ? ( Y page 134). The DISTRONIC PLUS is activated and resumes to the last set speed or, if no speed is stored, it will set and store the current speed. X Remove your foot from the accelerator pedal.
X Increasing distance: Turn distance setting switch : in direction of arrow ; . Increasing the distance setting tells the DISTRONIC PLUS to maintain a greater following distance to the preceding vehicle. X Decreasing distance: Turn distance setting switch : in direction of arrow = .
Turns and bends In turns or bends, the DISTRONIC PLUS may not detect a preceding vehicle, or it may detect one too soon. This may cause your vehicle to brake late or unexpectedly. Offset driving A vehicle traveling in your lane but offset from your direct line of travel may not be detected by the DISTRONIC PLUS.
Cross-traffic The DISTRONIC PLUS may inadvertently detect crossing vehicles. If you switch on the DISTRONIC PLUS, for example, at a traffic light with cross traffic, the vehicle may suddenly start to drive off.
Activating HOLD X Make sure the activation conditions are met. X Depress the brake pedal. X Continue to depress the brake pedal with increased pedal pressure until the message HOLD appears in the multifunction display. The HOLD function is activated. You can now release the brake pedal.
In addition, a continuous acoustic warning signal may sound, when the HOLD function is activated and you R turn off the engine, release the seat belt and open the driver’s door R open the hood The acoustic warning signal makes you aware of the fact that you have parked the vehicle with the HOLD function activated.
X Press button ; . Indicator lamp : goes out. The comfort driving mode is selected. The automatic program mode C is selected and will be displayed in the multifunction display ( Y page 107).
! Ultrasonic signals from outside sources (e.g. truck air brakes, car wash, or jackhammers) may impair the operation of the Parktronic system. Range of the sensors Front sensors Center approx. 40 in (100 cm) Corners approx. 24 in (60 cm) Rear sensors Center approx.
Current transmission position Warning indicator D Front area activated R or N Front and rear area activated As your vehicle approaches an object, one or more distance segments will illuminate, depending on the distance. When the seventh distance segment illuminates, you have reached the minimum distance.
or X Check the Parktronic system operation at another location to rule out interference from outside radio or ultrasonic signals. Parking Guidance The Parking Guidance is part of the Parktronic system. With the Parktronic system switched on ( Y page 146), the Parking Guidance is also available.
R You may not use the Parking Guidance when transporting cargo that protrudes the vehicle. R Do not use the Parking Guidance when driving with snow chains or when a spare wheel is mounted.
X If applicable, drive straight backward a little. An arrow pointing toward you indicates the backward direction. X Drive straight backward until an acoustic signal sounds. Stop the vehicle. You have reached the stop position. The arrow is completely white.
maneuvering. Otherwise, they could be injured. G Warning! The rear view camera is only an aid and may display obstacles R from a distorted perspective R inaccurately R may not display obstacles at all The rear view camera does not relieve you of the responsibility to be cautious.
image again, disengage and reengage reverse gear R . X Switching off: Shift the automatic transmission into park position P , neutral position N , or drive position D . ATTENTION ASSIST The ATTENTION ASSIST supports you during long, monotonous rides, e.
be warned once more after 15 minutes at the earliest. During long trips, take regular and duly rests that allow you to recover sufficiently. The ATTENTION ASSIST will be reset and restarts evaluating the degree of your fatigue when R you turn off the engine R you release the seat belt and open the driver’s door, e.
Rear climate control Canada only The rear climate control allows separate climate settings for the rear compartment. Control panels Dual-zone automatic climate control USA only Function Recommendation/Notes : Air distribution and air volume (automatic mode) i Switch on the automatic mode.
Function Recommendation/Notes B A/C cooling on/off i Switch on/off the air conditioning. ( Y page 158) C Rear window defroster ( Y page 164) D Climate control on/ off i Switch on/off the climate control system. ( Y page 157) E Temperature control, passenger side i Set the temperature to 72‡ (22†).
Function Recommendation/Notes A Air distribution and air volume (automatic mode) i Switch on the automatic mode. The indicator lamp above button à comes on.
Function Recommendation/Notes Front climate control panel : Air distribution and air volume (automatic mode) i Switch on the automatic mode. The indicator lamp above button à comes on. ( Y page 158) ; Front defroster i Keep this setting selected only until the windshield and the front side windows are clear again.
Function Recommendation/Notes K Temperature control, raising i Set the temperature to 72‡ (22†). ( Y page 159) L Display M Temperature control, lowering i Set the temperature to 72‡ (22†). ( Y page 159) Notes on climate control system The climate control system is operational whenever the engine is running.
Air conditioning The air conditioning is operational while the engine is running and cools the interior air to the temperature set by the operator. In addition, the air conditioning dehumidifies the interior air and helps prevent window fogging.
X Deactivating: Press rocker switch H or I ( Y page 155). The indicator lamp above button à goes out. Setting temperature Dual-zone automatic climate control You can adjust the air temperature on each side of the passenger compartment. You should raise or lower the temperature setting in small increments, preferably starting at 72‡ (22†).
Center air vents : Left center air vent, adjustable ; Right center air vent, adjustable = Thumbwheel for air volume control for adjustable right center air vent ? Thumbwheel for air volume control for adjustable left center air vent X Opening/closing: Turn thumbwheels = and ? upward or downward.
Rear center console air vents : Thumbwheel for air volume control for rear center air vents ; Right rear center air vent, adjustable = Rear climate control panel (3-zone automatic climate control, Canada only) ? Left rear center air vent, adjustable X Opening/closing: Turn thumbwheel : upward or downward.
You can also defog the windshield and the door windows. i Keep this setting selected only until the windshield or the door windows are clear again. X Activating: Press button ¬ .
Air recirculation mode Switch to air recirculation mode to prevent unpleasant odors from entering the vehicle from the outside (e. g. before driving through a tunnel). This setting cuts off the intake of outside air and recirculates the air in the passenger compartment.
The temperature can be adjusted for each zone individually. X Deactivating: Press button á . The indicator lamp above the button goes out. The temperature can be adjusted for all zones via the driver’s-side settings. 3-zone automatic climate control X Activating: Press button á .
X Retracting/Extending: Move the roof panel switch to the resistance point in the required direction of arrow : , ; or = until the roller sunblind has reached the desired position. X Express operation: Move the roof panel switch past the resistance point in direction of arrow : , ; or = and release.
X Switch on the ignition. Opening X Opening manually: Press and hold the roof panel switch to the resistance point in direction of arrow ; . X Release the roof panel switch when the desired position is reached.
function for as long as you hold the roof panel switch. Synchronizing The tilt/sliding panel and roller sunblind must be synchronized after a malfunction or if the tilt/sliding panel does not open smoothly. ! Do not attempt to open the tilt/sliding panel before the tilt/sliding panel is properly synchronized.
Please pay attention to and comply with the following instructions when loading the vehicle and transporting cargo: R Always place items being carried against front or rear seat backrests, and fasten them as securely as possible. R The heaviest portion of the cargo should always be kept as low as possible against front or rear seat backrests.
Retaining hooks Two retaining hooks can be used to attach cargo items such as bags. ! Do not use the retaining hooks to tie down cargo. Use retaining hooks to secure light-weight items only. The maximum permissible weight per retaining hook is 6,6 lbs (3 kg).
Setting up seat backrest X Fold seat backrest : rearward until it engages. ! Make sure that the seat belt is not pinched. X Check for secure locking by pushing and pulling on the seat backrest.
1 Glove box unlocked 2 Glove box locked Front armrest storage compartments i There is a small and a large storage compartment located underneath the armrest. The small storage compartment can be removed for the purpose of emptying. X Opening storage compartments: Press button : or ; .
damage not covered by the Mercedes-Benz Limited Warranty. When not in use, keep the cup holder closed. An open cup holder may cause injury to you or others when contacted during braking, vehicle maneuvers, or in an accident.
X Adjust sun visor by pushing or pulling. Vanity mirror The vanity mirror lamp : only functions when the sun visor is engaged in mounting ; . X Flip sun visor down.
X Removing ashtray insert: Push button = to disengage ashtray insert : and remove it. X Reinstalling ashtray insert: Push ashtray insert : down into the retainer until it engages. Cigarette lighter G Observe Safety notes, see page 53. G Warning! Never touch the heating element or sides of the lighter; they are extremely hot.
To ensure your system is activated and operational, please press Information button ï to perform the acquaintance call. Failure to complete either of these steps may result in a system that is not activated.
1-800-FOR-MERCedes (1-800-367-6372) (USA only) or 1-888-923-8367 (Canada only) as soon as possible. Emergency calls ! In order to activate the Tele Aid system, a subscriber agreement must be completed. To ensure your system is activated and operational, please press Information button ï to perform the acquaintance call.
X Wait for a voice connection to the Customer Assistance Center. X Close cover : after the emergency call is concluded. G Warning! If you feel at any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, vehicle in a dangerous road location), please do not wait for voice contact after you have pressed the emergency button.
X Terminating calls: Press button ~ on the multifunction steering wheel. or X Press the respective button for ending a telephone call on the COMAND system. Information button X Press and hold Information button : for longer than 2 seconds. A call to the Customer Assistance Center will be initiated.
Search & Send “Search & Send” is a navigation destination address entry service. For more information on “Search & Send”, refer to separate COMAND system operating instructions. Remote door unlock In case you have locked your vehicle unintentionally (e.
G Warning! Before programming the integrated remote control to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. When programming a garage door opener, the door moves up or down.
release the hand-held remote control button and the signal transmitter button. X Step 6: Press and hold the just-trained signal transmitter button ( ; , = or ? ) and observe indicator lamp : .
remote control until the frequency signal has been learned. Upon successful training, indicator lamp : will flash slowly and then rapidly after several seconds.
i Certain types of garage door openers are incompatible with the integrated remote control. If you should experience further difficulties with programming the integrated remote control, contact an aut.
Zone map South America X Press button = approximately 3 seconds. The currently selected zone appears in compass display ; . X Selecting zone: Press button = until the desired zone is selected. Do not press the button again until the direction is indicated.
Vehicle equipment ............................ 186 The first 1000 miles (1500 km) ....... 186 At the gas station ............................. 186 Engine compartment ........................ 188 Tires and wheels ............................... 192 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
i Only use premium unleaded gasoline with a minimum Posted Octane Rating of 91 (average of 96 RON/86 MON). Information on gasoline quality can normally be found on the fuel pump. Please contact gas station personnel in case labels on the pump cannot be found.
Engine compartment Hood G Warning! Do not pull the release lever while the vehicle is in motion. Otherwise the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and/or others. Opening G Warning! Do not open the hood when the engine is overheated.
Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving off. Do not continue driving if the hood can no longer engage after an accident, for example.
For information on messages in the multifunction display concerning engine oil, see the “Practical hints” section ( Y page 254). Adding engine oil ! Only use approved engine oils and oil filters required for vehicles with Maintenance System.
may burn if it comes into contact with hot engine parts. X Using a rag, slowly open cap : approximately 1 / 2 turn counterclockwise to relieve excess pressure.
checked for brake pad thickness and leaks immediately. Contact an authorized Mercedes-Benz Center immediately. Do not add brake fluid as this will not solve the problem. For more information, see “Practical hints”. When checking the brake fluid level, the vehicle must be parked on level ground.
R Regularly check the tires and rims for damage. Dented or bent rims can cause tire inflation pressure loss and damage to the tire beads. R If the vehicle is heavily loaded, check tire inflation pressure and correct as required. R Do not allow your tires to wear down too far.
The Tire and Loading Information placard lists the recommended cold tire inflation pressures : for maximum loaded vehicle weight. The tire inflation pressures listed apply to the tires installed as original equipment.
Example illustration: Tire inflation pressures for particular tire sizes Some tire inflation pressure labels may only show the rim diameter instead of the entire tire size, e.g. R 18 or 18" . The rim diameter is part of the tire size as specified on the tire sidewall ( Y page 209).
can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Check the tire inflation pressure at least once a month. Check and adjust the tire inflation pressure when the tires are cold ( Y page 193).
The tire inflation pressures are not listed in the Operator’s Manual. G Warning! The tire pressure loss warning system does not provide a warning for wrongly selected tire inflation pressures.
Advanced Tire Pressure Monitoring System (Advanced TPMS), (USA only) Your vehicle is equipped with the Advanced Tire Pressure Monitoring System (Advanced TPMS). It measures the tire inflation pressure in the vehicle’s tires and issues warnings in case of pressure loss in one or more of the tires.
replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. i If a condition causing the TPMS to malfunction develops, it may take up to 10 minutes for the system to signal a malfunction using the TPMS telltale flashing and illumination sequence.
Tire inflation pressure warnings If the system detects a significant loss of tire inflation pressure in one or more than one tire, a message appears in the multifunction display. In addition, an acoustic warning sounds and the low tire pressure telltale in the instrument cluster comes on.
may be displayed for the wrong position temporarily. After driving for a few minutes, the inflation pressure will be shown for the correct position. Maximum tire inflation pressure G Warning! Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures.
Tire and Loading Information G Warning! Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver’s door B-pillar. Overloading the tires can overheat them, possibly causing a blowout.
X Step 4: The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1 400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1 400 - 750 (5 x 150) = 650 lbs).
Example 1 Example 2 Example 3 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs 1 500 lbs Example 1 Example 2 Example 3 Step 2 Number of.
Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle. You can obtain the GVWR and GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 294).
Tire care and maintenance G Warning! Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them.
Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels. Cleaning tires ! Never use a round nozzle to power wash tires. The intense jet of water can result in damage to the tire.
The safe speed on a wet, snow covered or icy road is always lower than on a dry road. You should pay particular attention to the condition of the road whenever the outside temperature is close to the freezing point.
Thoroughly clean the mounting face of wheels and brake disks, i.e. the inner side of the wheels/tires, during each rotation. Check for and ensure proper tire inflation pressure.
Letter “T” preceding the size designation: Temporary spare tires which are high pressure compact spares designed for temporary emergency use only. Tire width Tire width : indicates the nominal tire width in millimeters.
Index Speed rating H up to 130 mph (210 km/h) V up to 149 mph (240 km/h) W up to 168 mph (270 km/h) Y up to 186 mph (300 km/h) ZR...Y up to 186 mph (300 km/h) ZR.
Load identification i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. In addition to the load index, special load identification : may be molded into the tire sidewall following the letter designating the speed symbol B ( Y page 209).
Tire type code Tire type code ? may, at the option of the manufacturer, be used as a descriptive code for identifying significant characteristics of the tire.
GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle weight. The gross vehicle weight on each axle must never exceed the GAWR for the front and rear axle indicated on the certification label located on the driver’s door B-pillar.
Sidewall The portion of a tire between the tread and the bead. TIN (Tire Identification Number) Unique identifier which facilitates efforts by tire manufacturers to notify purchasers in recall situations or other safety matters concerning tires and gives purchasers the means to easily identify such tires.
Always use winter tires at temperatures below 45‡ (7†) and whenever wintry road conditions prevail. Not all M+S rated tires provide special winter performance. Make sure the tires you use show the mountain/ snowflake i marking on the tire sidewall.
Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges. G Warning! On slippery road surfaces, never downshift in order to obtain braking action.
obstacles. If there are any floormats or carpets in the footwell, make sure that the pedals still have sufficient clearance. During sudden driving or braking maneuvers, the objects could get caught between the pedals. You could then no longer brake or accelerate.
removed without putting other road users at risk R maintain a greater distance to the vehicle ahead and drive with particular care R carefully apply the brakes at the end of a trip and immediately aft.
when conditions indicate possible hydroplaning: X Reduce vehicle speed. X Avoid track grooves in the road. X Apply brakes cautiously. Standing water ! Do not drive through flooded areas.
cause determined and corrected immediately. If you must drive under these conditions, drive only with at least one window fully open at all times. Maintenance Notes The Maintenance System in your vehicle tracks the distance driven and the time elapsed since the last maintenance service.
In addition, a signal sounds when the message appears. Any authorized Mercedes-Benz Center will reset the maintenance service indicator following a completed maintenance service. Calling up the maintenance service indicator display i The menu overview can be found on ( Y page 114).
While in operation, even while parked, your vehicle is subjected to varying external influences which, if gone unchecked, can attack the paintwork as well as the vehicle underbody and cause lasting damage.
Tar stains Quickly remove tar stains before they dry and become more difficult to remove. A tar remover is recommended. Paintwork, painted body components ! Affixing stickers, magnets, adhesive tape or similar materials to painted body components may damage the paintwork.
If the vehicle is very dirty, prewash it before running it through the automatic car wash. ! Make sure the combination switch is set to wiper setting $ . Otherwise, the rain sensor could activate and cause the wipers to move unintentionally. This may lead to vehicle damage.
! If you use a power washer to clean the sensor covers, observe the following: R Follow the instructions provided by the power washer manufacturer. R Maintain a distance between the sensor covers and the nozzle of the power washer.
! Do not use a dry cloth, abrasives, solvents or cleaners containing solvents. Do not touch the protective layer with hard objects such as an ice scraper or ring. Never apply strong force and only use a soft, non- scratching cloth when cleaning the rear part of the tilt/sliding panel.
Carpets X Use Mercedes-Benz approved Carpet and Fabric Care for cleaning the carpets. Headliner and shelf below rear window X Use a soft bristle brush or a dry-shampoo cleaner in case of excessive dirt. Seat belts X Only use clear, lukewarm water and soap.
Vehicle equipment ............................ 230 Where will I find ...? .......................... 230 Vehicle status messages in the multifunction display ....................... 232 What to do if … .................................. 260 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
= Tab ? Removing vehicle tool kit box A Vehicle tool kit box cover B Opening vehicle tool kit box cover C Tab D Vehicle tool kit E Vehicle tool kit box F Luggage bowl X Removing vehicle tool kit box: Pull tab = in direction of arrow ? and lift vehicle tool kit box E .
X Turn the crank handle in the direction of arrow as far as it will go. Operational position X Turn the crank handle clockwise. Before placing the jack back into the vehicle tool kit: X Fully collapse the jack. X Fold in the crank handle (storage position).
addressed as soon as possible at an authorized Mercedes-Benz Center. Failure to repair the condition noted may cause damage not covered by the Mercedes- Benz Limited Warranty, or result in property damage or personal injury. G Warning! No messages will be displayed if either the instrument cluster or the multifunction display is inoperative.
Text messages Safety systems Display messages Possible causes/consequences and M Solutions PRE-SAFE Inoperativ e See Operator's Manual The PRE-SAFE ® system has failed. All other occupant safety systems, such as the air bags, are still available.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator’s Manual The front passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the front passenger seat, or the front passenger seat is empty.
G Warning! If the 45 indicator lamp remains out even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals use the passenger seat until the system has been repaired.
G Warning! If the 45 indicator lamp remains illuminated with an adult occupant on the front passenger seat even after performing the above corrective steps, do not have any passenger use the front passenger seat until the system has been repaired.
Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS Currently Unavailabl e See Operator's Manual The DISTRONIC PLUS is temporarily unavailable.
Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS - - - mph One of the activation conditions for the DISTRONIC PLUS has not been fulfilled. You may have attempted to set a speed below 20 mph (30 km/h). X Drive faster than 20 mph (30 km/h) if the situation allows and set the speed.
Display messages Possible causes/consequences and M Solutions Radar Sensors Deactivate d See Operator's Manual You have attempted to activate the DISTRONIC PLUS or the PRE-SAFE ® Brake even though you have switched off the radar sensors on the vehicle.
Display messages Possible causes/consequences and M Solutions P Shift to 'P' In addition an acoustic warning sounds. You have turned off the engine with the KEYLESS-GO start/ stop button with the automatic transmission in neutral position N and opened the driver’s door.
Tires Display messages Possible causes/consequences and M Solutions Check Tire Pressure Then Restart Run Flat Indicator There has been a warning message about a loss in the tire inflation pressure and the tire pressure loss warning system was not restarted yet.
Display messages Possible causes/consequences and M Solutions TirePress. Sensor(s)M issing At least one sensor is defect (e.g. battery is empty). The respective tire is indicated by – – instead of the tire inflation pressure in the multifunction display.
Display messages Possible causes/consequences and M Solutions Check Tires The tire inflation pressure in at least one tire is significantly below the reference value. The respective tire is indicated in the multifunction display. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ABS and ESC Inoperativ e See Operator’s Manual In addition, the yellow ESC warning lamp ä , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBD, ABS, and ESC Inoperativ e See Operator's Manual In addition, the yellow ESC warning lamp ä , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on.
G Warning! Driving with the message Check Brake Fluid Level displayed can result in an accident. Have your brake system checked immediately. Do not add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
Display messages Possible causes/consequences and M Solutions 6 Front Left SRS Malfunctio n Service Required Components of the driver’s supplemental restraint system may not work properly. X Drive with added caution to the nearest authorized Mercedes-Benz Center.
Driving systems Display messages Possible causes/consequences and M Solutions À Attention Assist Time for a rest? The ATTENTION ASSIST has determined that your concentration has declined considering certain criteria. In addition, an acoustic warning sounds.
Display messages Possible causes/consequences and M Solutions _ Rear Left Backrest Not Latched or Rear Right Backrest Not Latched The left or right rear seat backrest is not engaged. X Adjust the rear seat backrest until it is fully engaged in position.
Display messages Possible causes/consequences and M Solutions + Key Not Detected (message appears in red) The SmartKey with KEYLESS-GO is not detected while the engine is running because there is strong radio-frequency interference. X Stop the vehicle as soon as it is safe to do so.
Engine Display messages Possible causes/consequences and M Solutions + Check Coolant Level See Operator's Manual The coolant level is too low. X Add coolant ( Y page 190). X If you have to add coolant frequently, have the cooling system checked at an authorized Mercedes-Benz Center.
! The engine should not be operated with the coolant temperature above 248‡ (120†). Doing so may cause serious damage which is not covered by the Mercedes-Benz Limited Warranty. Display messages Possible causes/consequences and M Solutions ? Coolant Low Stop Vehicle! Turn Engine Off The poly-V-belt could be broken.
Display messages Possible causes/consequences and M Solutions # The battery is no longer charging. Possible causes: R alternator malfunctioning R broken poly-V-belt R a malfunction in the electronic system X Stop immediately in a safe location or as soon as it is safe to do so and check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions 8 Gas Cap Loose A loss of pressure has been detected in the fuel system. The fuel cap may not be closed properly or the fuel system may be leaking. X Check the fuel cap ( Y page 186). X If it is not closed properly: Close the fuel cap.
Display messages Possible causes/consequences and M Solutions b Check Center Brake Lamp The high-mounted brake lamp is malfunctioning. This message will only appear if all LEDs have stopped working. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Check Left High Beam or Check Right High Beam The left or right high-beam lamp is malfunctioning. X Halogen headlamp: Replace the bulb as soon as possible ( Y page 275). X Bi-Xenon headlamp: Contact an authorized Mercedes- Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Switch Off Lights You have removed the SmartKey from the starter switch, opened the driver’s door and left the headlamps on or removed the SmartKey with KEYLESS-GO from the vehicle and left the headlamps on.
Display messages Possible causes/consequences and M Solutions b Check Front Left Turn Signal or Check Front Right Turn Signal The left or right front turn signal lamp is malfunctioning.
G Warning! Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You may lose control of the vehicle. Continued driving with a flat tire will cause excessive heat build-up and possibly a fire. G Warning! Follow recommended tire inflation pressures.
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The brake system is still functioning normally but due to a malfunction.
Problem Possible causes/consequences and M Solutions $ (USA only) J (Canada only) The red brake warning lamp comes on while driving and an acoustic warning sounds.
Safety systems Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off.
i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and front passenger’s seat belt are fastened, or the vehicle is standing still and a door is opened.
Problem Possible causes/consequences and M Solutions å The yellow ESC OFF warning lamp comes on while the engine is running. The ESC has been switched off. Risk of accident! When the ESC is switched off it will not stabilize the vehicle if the system recognizes that the vehicle starts to skid or that a wheel is spinning.
Driving systems Problem Possible causes/consequences and M Solutions · The red distance warning lamp comes on while driving and an acoustic warning sounds. You are gaining too rapidly on the vehicle ahead of you or DISTRONIC PLUS or PRE-SAFE ® Brake has recognized a stationary obstacle on your probable line of travel.
Engine Problem Possible causes/consequences and M Solutions ; The yellow engine malfunction indicator lamp comes on when the engine is running. There may be a malfunction in R the fuel management syst.
Problem Possible causes/consequences and M Solutions ? The red coolant temperature warning lamp comes on when the engine is running and an acoustic warning sounds. The coolant temperature has exceeded 248‡ (120†). X Stop in a safe location as soon as possible and allow the engine and coolant to cool down.
Tires Problem Possible causes/consequences and M Solutions h USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. The Advanced TPMS detects a loss of pressure in at least one tire. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
G Warning! If the 45 indicator lamp does not illuminate or remains out with the weight of a typical 12-month-old child in a standard child restraint or less on the front passenger seat, do not transport a child on the front passenger seat until the system has been repaired.
X Turn mechanical key ; back and remove it from the trunk lid lock. Locking the vehicle If you cannot lock the vehicle with the SmartKey or with KEYLESS-GO, lock it as follows: X Open the driver’s door. X Close the passenger door and the trunk. X Press the central locking switch ( Y page 75).
Fuel filler flap G Warning! Avoid contact with the vehicle walls as they may contain sharp edges. Otherwise, you could injure yourself while releasing the fuel filler flap. In case the central locking system does not release the fuel filler flap, you can open it manually.
X Pull the top of the head restraint cushion in direction of arrow : as far as it will go. X Adjust the head restraint cushion downward in direction of arrow ; as far as it will go. X Firmly press the top of the head restraint cushion towards the head restraint cover in direction of arrow = until it engages.
X Remove the battery compartment cover. X Pat the SmartKey against the palm of your hand until battery = falls out. X Insert the new battery with the positive terminal (+) facing up. Use a lint-free cloth. X Insert the tabs of the battery compartment cover into the housing and press the cover closed.
Bulbs You can replace the following bulbs yourself: Halogen headlamps Type : Low-beam lamp: H7 55 W ; High-beam lamp: H7 55 W = Parking and standing lamp: W 5 W ? Turn signal lamp: 3457A Bi-Xenon headlamps Type : Corner-illuminating lamp: H7 55 W Notes on bulb replacement ! Do not replace LEDs or bulbs not described in this section.
recommended to have such work done by a qualified technician. Before you start to replace a bulb for a front lamp, do the following: X Switch off the ignition.
X Driver’s side only: Release the washer fluid reservoir ( Y page 277). X Turn housing cover : counterclockwise and remove it. X Turn bulb socket ; counterclockwise and pull it out. X Pull the bulb out of bulb socket ; . X Insert the new bulb into bulb socket ; .
properly. As a result, you may not be able to observe surrounding traffic conditions and could cause an accident. ! Never open the hood when a wiper arm is folded forward. Hold on to the wiper when folding a wiper arm back. If released, the force of the impact from the tensioning spring could crack the windshield.
X Turn the steering wheel so that the front wheels are in a straight-ahead position. X Engage the parking brake. X Shift the automatic transmission into park position P .
Never start the engine when the vehicle is raised. Also observe the notes on the jack. X Prevent the vehicle from rolling away by blocking wheels with wheel chocks or other sizeable objects. When your vehicle is equipped with a wheel chock, it is included with the vehicle tool kit ( Y page 230).
X Place jack ? on firm ground. X Position jack ? under take-up bracket = so that it is always vertical as seen from the side, even if the vehicle is parked on an incline. X Turn crank A clockwise until jack ? is fully seated in take-up bracket = and the jack base evenly meets the ground.
X Unscrew the alignment bolt. X Install the last wheel bolt and tighten it slightly. Lowering the vehicle X Lower the vehicle by turning the crank counterclockwise until the vehicle is resting fully on its own weight.
Keep children away. Follow the instructions in this Operator’s Manual. A battery contains materials that can harm the environment if disposed of improperly. A large 12 V storage battery contains lead. Recycling of the battery is the preferred method of disposal.
! Never loosen or detach battery terminal clamps while the engine is running or the SmartKey is in the starter switch or KEYLESS-GO button is in position 1 . Otherwise the alternator and other electronic components could be severely damaged. Have the battery checked regularly at an authorized Mercedes-Benz Center.
Make sure the cable clamps do not touch any other metal part while the other end is still attached to a battery. If the battery is discharged, the engine can be started with jumper cables and the fully charged battery of another vehicle or an equivalent starter pack.
! Never invert the terminal connections! X Connect positive terminal ; of charged battery B with positive terminal = with a jumper cable. Clamp the cable to positive terminal ; of charged battery B first. X Start engine of the vehicle with charged battery B and run at idle speed.
i If the battery is disconnected or discharged R the SmartKey will not turn in the starter switch R the automatic transmission will remain in park position P For more information see “Battery” ( Y page 283) or “Jump starting” ( Y page 285). For information on manually unlocking the gear selector lever, see ( Y page 272).
X Insert wheel wrench into towing eye and tighten towing eye bolt ; by turning it clockwise. or X If your vehicle is not equipped with a wheel wrench, use a suitable object to turn the towing eye bolt. Removing towing eye bolt X Loosen towing eye bolt ; by turning it counterclockwise.
! The vehicle may be towed only for distances up to 30 miles (50 km) and at a speed not to exceed 30 mph (50 km/h). i While being towed with the hazard warning flasher in use, use the combination switch in the usual manner to signal turns. Only the selected turn signal will operate.
! The fuse box cover must be properly positioned as described. Otherwise, moisture or dirt could enter the fuse box and possibly impair fuse operation. Fuse box in trunk X Open the trunk. X Opening: Turn lock : clockwise. X Pull cover ; downward in direction of arrow.
292 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 292.
Vehicle equipment ............................ 294 Parts service ..................................... 294 Warranty coverage ........................... 294 Identification labels .......................... 294 Vehicle specification E 350 (207.356) ...
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Example certification label (U.S. vehicles) ; VIN = Paintwork code Example certification label (Canada vehicles) ; VIN = Paintwork code i Data shown on certification label are for illustration purposes only. These data are specific to each vehicle and may vary from data shown in the illustration.
Vehicle specification E 350 (207.356) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. Engine E 350 Engine, type 272 Mode of operation 4-stroke engine, gasoline injection No.
Engine E 550 No. of cylinders 8 Bore 3.86 in (98.00 mm) Stroke 3.56 in (90.50 mm) Total piston displacement 333.2 cu in (5 461 cm 3 ) Compression ratio 10.
! Using tires other than those approved by Mercedes-Benz can have detrimental effects, such as R poor handling characteristics R increased noise R increased fuel consumption Moreover, tires and rims n.
Same size tires E 350 E 350 (Sport Package) 17" wheels Rims (light alloy) Wheel offset 7.5 J x 17 H2 1.77 in (45 mm) Winter tires 18,19 235/45 R17 94H M+S i E 550 E 550 (Sport Package) 18" wheels Rims (light alloy) Wheel offset 8.0 J x 18 H2 1.
Mixed size tires E 350 17" wheels Front axle Rims (light alloy) Wheel offset 7.5 J x 17 H2 1.77 in (45 mm) All-season tires 20 235/45 R17 94H M+S Rear axle Rims (light alloy) Wheel offset 8.5 J x 17 H2 1.93 in (49 mm) All-season tires 20,21 255/40 R17 94H M+S E 550 18" wheels Front axle Rims (light alloy) Wheel offset 8.
i Please note that the tire inflation pressure of the spare wheel differs from the tire inflation pressure of the road tires. All models Rim (light alloy) 3.5 B x 17 H2 Wheel offset 0.77 in (19.5 mm) Minispare tire 22 T 135/80 R17 103M Recommended tire inflation pressure 61 psi (4.
Model Capacity Fuels, coolants, lubricants, etc. Cooling system E 350 approx. 8.9 US qt (8.4 l) MB 325.0 Anticorrosion/ Antifreeze E 550 approx. 8.0 US qt (7.6 l) Fuel tank All models 17.4 US gal (66.0 l) Gasoline engine: Premium unleaded gasoline (Minimum Posted Octane 91 [Avg.
Viscosity grades for engine oils Using the chart below, select oil viscosity according to the lowest air temperature expected before the next oil change.
is fully loaded or operating in mountainous terrain. Fuel requirements Only use premium unleaded gasoline. The octane number (posted at the pump) must be 91 min. It is an average of both the Research Octane Number (RON) and the Motor Octane Number (MON): (RON+MON)/2.
The coolant solution must be used year round to provide the necessary corrosion protection and increase boil-over protection. Refer to the Maintenance Booklet for replacement interval. Coolant system design and coolant used determine the replacement interval.
Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. X Use MB Windshield Washer Concentrate “MB SummerFit”.
307 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 307.
308 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 308.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 3716 13 Part no. 207 584 27 81 Edition B 2010 É2075842781'ËÍ 2075842781 207_AKB; 2; 35, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T07:10:21+02:00 - Seite 310.
Een belangrijk punt na aankoop van elk apparaat Mercedes-Benz 2010 E-Class Coupe (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mercedes-Benz 2010 E-Class Coupe heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mercedes-Benz 2010 E-Class Coupe vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mercedes-Benz 2010 E-Class Coupe leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mercedes-Benz 2010 E-Class Coupe krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mercedes-Benz 2010 E-Class Coupe bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mercedes-Benz 2010 E-Class Coupe kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mercedes-Benz 2010 E-Class Coupe . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
