Gebruiksaanwijzing /service van het product ARC-8050 van de fabrikant Areca
Ga naar pagina of 36
ARC-8050 (Thunderbolt to 6Gb/s SAS RAID Stor age) Quick Start Guide V ersion: 2.0 Issue Date: January , 2014 Thunderbolt™ Prod uct.
Copyright and Trademarks The information regarding products in this manual is subject to change without prior notice and does not represent a commitment on the part of the vendor , who assumes no liability or responsibility for any errors that may appear in this manual.
Contents 1. Installation .................................................................. 4 1.1 Before Y ou First Installing................................................... 4 1.2 Summary of RAID Storage Setup Steps ...............................
INSTALLATION 4 1. Installation This section describes how to install the ARC -8050 Thunderbolt RAID storage with host computer and disks. 1.1 Before You First Installing Thanks for purchasing the ARC -8050 as your RAID data storage.
INSTALLATION 5 1.2 Summary of RAID Storage Setup Steps • For Mac OS X Step 1. Physically Install the Hardware (Chapter 1.5.1 ) 1. Install HDDs. 2. Connect power cord. 3. Connect Thunderbolt cable. Step 2. Install the MRAID Software P ackage (Chapter 1.
INSTALLATION 6 Step 2. Install the MRAID Software P ackage (Chapter 1.5.3.1 ) 1. Download the install_mraid installer from the website at “ http://www.areca.com.tw/support/s_ thunderbolt/thunder bolt.htm ”. 2. Double-click on the install_mraid zipped le.
INSTALLATION 7 Front View Rear View 1. Disk Activity LED 2. Disk F ault / Link LED 3. LCD P anel with K eypad 4. Thunderbolt P ort1 5. Thunderbolt P ort2 6. Thunderbolt P ort1 Link LED 7. Thunderbolt P ort2 Link LED 8. System F an1 9. LAN P ort (F or McRAID W eb Manager) 10.
INSTALLATION 8 1.4 Locations of the Storage Component The following components come with LEDs that inform ARC -8050 RAID storage managers about the oper ational status. 1.4.1 Drive Tray LED Indicators Figure 1-1, Activity/F ault LED The following table describes the RAID storage disk driv e tray LED behavior .
INSTALLATION 9 1.4.2 LCD Panel LED Indicators There are a variet y of status conditions that cause the RAID stor- age panel monitoring LED to light. The front panel LCD comes with three (3) status-indicating LEDs. The LEDs on the front panel are dened, from top to bottom, P ower , Busy , and Caution, as shown in Figure 1-2.
INSTALLATION 10 1.5 Setting Up RAID Storage Setting up your ARC -8050 RAID storage inv olves these main steps: • Physically Install the RAID Stor age and Drives • Install the MRAID Software • Congure RAID V olumes • Format RAID V olumes • Unmounting RAID V olumes Details about these steps are described in the following sections.
INSTALLATION 11 2. Install t he drive into the drive tr ay and secure the drive to the drive tr ay by four of the mounting screws. Figure 1-5, Sliding Drive T ray into Enclosure 3. After all drives are in the drive tr ay , slide all of them back into the ARC -8050 RAID storage and make sure y ou latch the drive tra ys.
INSTALLATION 12 • Thunderbolt Computer Port Connection By installing Thunderbolt technology capable computer and ARC -8050 Thunderbolt port using the Thunderbolt cable which is included in your Thunderbolt capable computer .
INSTALLATION 13 Figure 1-7, Thunderbolt Computer Daisy Chain Step 3. Connecting Monitor Port (Optional) Y ou can connect LAN port to the manager clinet system, if you want to congure and manage the RAID stor age from the clinet system through out-of -band manager .
INSTALLATION 14 Figure 1-8, Connecting the P ower to Enclosure. 3. ARC -8050 RAID storage automatically turns off when the computer to which it is attached sleeps or is disconnected. Note: Y ou can press and hold the “Reset” button for 3 seconds to force the RAID storage AC power on or off .
INSTALLATION 15 2. Double-click on the zipped le that comes from the website or resides at <CDROM>packagesMacOS to add the installer on the Finder . 3. Launch the installer by double-clicking the install_mraid on the Finder . The MRAID Installer opens.
INSTALLATION 16 • ArcHTTP has to be installed for GUI RAID console (MRAID storage manager) to run. It also runs as a service or daemon in the background that allows capturing of events for mail and SNMP traps notication.
INSTALLATION 17 8. A program bar appears that measures the progress of the driver installation. 9. When this screen shows, you hav e completed the driver installation and click on the " Next " button to continue.
INSTALLATION 18 10. After installation is completed, click on the " Done " button to reboot your computer in order to complete installation. 11.
INSTALLATION 19 • Method 1: McRAID Storage Manager From ArcHT TP Start McRAID Storage Manager – Browser Edition There is one “ MRAID ” icon showing on your desktop. Double- click on the “ MRAID ” icon to locate your ArcHT TP utility and CLI program le folder .
INSTALLATION 20 Click on the “Quick Create” in the main menu, your v olume is automatically congured based on the number of disks in your system. Y ou can create a RAID set associated with exactly one volume set. The user can change the R aid Level, Capacity , Initialization Mode, and Stripe Size.
INSTALLATION 21 • Method 3: LCD P anel with K eypad Y ou can use LCD front panel and keypad function to simply create the RAID volume. The LCD status panel also informs you of the disk arr ay’ s current operating status at a glance. The LCD congur ation is described in a separate manual: ARC - 8050_LCD manual.
INSTALLATION 22 If you’re not sure which format to use, choose Mac OS X Extended (Journaled). 3. Specify your P artition Information, Option setting and click on the “ Apply ” button.
INSTALLATION 23 1.5.2.4 Make A Bootable RAID Volume Y ou can follow the following procedures to add ARC-8050 RAID volume on Intel-based Mac bootable device listing. 1. Set the BIOS selection in System Controls: Adv ance Congu- ration to “EFI” option for Intel-based Mac boot.
INSTALLATION 24 2. When the volume icon disappears from the desktop , RAID storage can be disconnected from the computer . 1.5.3 Windows Users 1.5.3.1 Install the MRAID Software This section describes how to install the MRAID software to your oper ating system.
INSTALLATION 25 5. When the License Agreement screen appears, read and agree to the license information; then let the InstallShield Wizard guide you through the installation process. 6. On the Setup T ype screen, use the settings to specify these things: and click on the “ Next ” button to continue.
INSTALLATION 26 • “Complete” to install driver , ArcHT TP and CLI utility at once, check the rst box. • “Custom” to install special components and change the pro- gram directory . When this “ Custom ” check box is checked, go to the Custom Setup screen.
INSTALLATION 27 8. A program bar appears that measures the progress of the driver installation. When this screen completes, you hav e completed the MRAID installation. If you hav e no ARC-8050 RAID stor age unit yet con - nected or powered on, a “MRAID Installer Information” message displays.
INSTALLATION 28 Note: “For Windows, Install Driver First” For Windows PC: the Thunderbolt certied device driv er must be installed before plugging in the device for it to function properly . 1.5.3.2 Congure RAID Volumes There are often multiple ways to accomplish the same congu - ration and maintenance tasks for y our RAID storage.
INSTALLATION 29 • Method 1: McRAID Storage Manager From ArcHT TP Start McRAID Storage Manager – Browser Edition Right-click on the “ Start ” menu and choose “ Programs ”. Double-click on the “ MRAID ” program icon to start the ArcHT TP utility (From the Start menu, choose Programs > MRAID > ArcHT TP).
INSTALLATION 30 Click on the “Quick Create” in the main menu, your v olume is automatically congured based on the number of disks in your system. Y ou can create a RAID set associated with exactly one volume set. The user can change the R aid Level, Capacity , Initialization Mode, and Stripe Size.
INSTALLATION 31 The LCD initial screen is shown below: 1.5.3.3 Format RAID Volumes After the volume set is ready for system accesses, it needs to be partitioned, formatted, and mounted by the oper ating system. The following steps show how to make any new disk arr ays or independent disks accessible to Windows system.
INSTALLATION 32 T o unmount ARC-8050 RAID stor age from a Windows system: 1. Click on the "Safely R emove Hardware and Eject Media" icon in the notication area, at the lower right -hand side of your screen, and then, in the list of devices, choose the Thunder- bolt storage v olume option that you want to remov e.
SPECIFICATION 33 2. Specication This section presents a brief overview of the 6Gb/s S AS RAID storage, ARC-8050. (Thunderbolt to 6Gb/s S AS RAID storage) 2.1 Overview Thunderbolt technology is a revolutionary high-speed, dual proto- col I/O technology designed for performance, simplicity and ex - ibility .
SPECIFICATION 34 Unsurpassed Data Availability Designed and lever aged with Areca’s existing high performance solution, the RAID storage deliv ers high-capacity at the best of cost performance value. It supports the hardw are RAID 6 engine to al- low two HDDs failures without impact the existing data and perfor - mance.
SPECIFICATION 35 2.2 Features Controller Architecture • 800 MHz dual core ROC for RAID core and SAS microcode • 1GB on-board DDR3-1333 SDRAM with ECC protection • Support bootable from RAID stor.
SPECIFICATION 36 Function Advantages Features Benets Bootable Drive Support Provide user the capability of adding bootable drive via Thunderbolt on Apple thunderbolt-capable machine. Advanced Congur ation Provide optimized par ameter to adjust controlled rmware behavior for smooth data streaming.
Een belangrijk punt na aankoop van elk apparaat Areca ARC-8050 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Areca ARC-8050 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Areca ARC-8050 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Areca ARC-8050 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Areca ARC-8050 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Areca ARC-8050 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Areca ARC-8050 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Areca ARC-8050 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
