Gebruiksaanwijzing /service van het product 2152-1M-01 van de fabrikant METRObility Optical Systems
Ga naar pagina of 20
Installation & User Guide 2151-AD-01 • 2152-1A-01 • 2152-1D-01 • 2152-1F-01 • 2152-17-01 2152-1J-01 • 2152-1K-01 • 2152-1M-01 • 2152-1X-01 • 2152-1Y -01 2152-AA-01 • 2152-AD-01 .
This publication is protected by the copyright laws of the United States and other countries, with all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, tra.
T able of Contents Metrobility , Metrobility Optical Systems, Lancast, and “ twister ” are registered trademarks of Metrobility Optical Systems, Inc. The Metrobility Optical Systems logo is a trademark of Metrobility Optical Systems, Inc. The information contained in this document is assumed to be correct and current.
4 Introduction The Metrobility Gigabit “twister” and SONET “twister” repr esent the latest technology available for extending Gigabit Ethernet, OC-3/STM-1 and OC-12/STM- 4 networks. Since Metrobility first developed “twister” media conversion, it has set the standard for providing affordable means of integrating mixed media networks.
Gigabit “ twister ” and SONET “ twister ” 5 Overview The Metrobility “twister” pr ovides seamless integration between fiber optic multimode and singlemode segments in Gigabit Ethernet, OC-3/STM-1 or OC-12/ STM-4 environments.
6 Installation Guide Installation Guide Follow the simple steps outlined in this section of the guide to install and start using your Metr obility “twister”.
Gigabit “ twister ” and SONET “ twister ” 7 NOTE: The ON/OFF positions ar e not the same on all units. By default, all DIP switches ar e disabled. Link Loss Return (LLR) Switch The Metrobility “twister” incorporates Link Loss Return functionality as an aid in troubleshooting remote fiber connections.
8 Installation Guide LLCF is enabled when the LLCF switch is in the ON position. The fiber -to- fiber repeater is shipped with LLCF disabled. On the fiber-to-fiber convert- ers (2151-AD-, 2125-xx- and 2135-34-01), LLCF is always enabled and cannot be disabled.
Gigabit “ twister ” and SONET “ twister ” 9 Fiber Optic Interface Multimode ports are labeled MM. Singlemode ports are labeled SM. Extended distance ports are labeled LH (Long Haul) or ELH (Extended Long Haul). Each fiber port provides an SC or LC connector .
10 Installation Guide Upon receiving power , the “twister” goes into normal operation mode. V erify valid connections via the PWR LED on the front panel. If an additional extension cord is used to connect the power supply to the outlet, follow the guidelines below .
Gigabit “ twister ” and SONET “ twister ” 11 User Guide This section contains more detailed information regarding the operating features of the Metrobility “twister”. LED Indicators The Metrobility “twister” provides three LEDs on the front panel for the visible verification of unit status and proper functionality .
12 User Guide Link Loss Return (LLR) The fiber ports on the “twister” have been designed with Link Loss Return function- ality for troubleshooting remote connections. When LLR is enabled * , the port’ s transmitter (TX) shuts down if its receiver (RX) fails to detect a valid receive link.
Gigabit “ twister ” and SONET “ twister ” 13 Link Loss Carry Forward (LLCF) The fiber-to-fiber “twister” units incorporate LLCF functionality to assist in trouble- shooting a remote connection. When LLCF is enabled * , the ports do not transmit link signals until they receive link signals from the opposite port.
14 User Guide Copper Loss Carry Forward (CLCF) The copper-to-fiber “twister” incorporates CLCF for identifying a lost copper connection. When CLCF is enabled * , the fiber port’ s transmitter shuts down if the copper port stops receiving link pulses.
Gigabit “ twister ” and SONET “ twister ” 15 T opology Solutions Enterprise Switch Singlemode F/O Links Multimode F/O Links Switch Switch singlemode F/O singlemode F/O singlemode F/O Servers .
16 User Guide l e d o M r e b i F e p y T e v a W h t g n e L e l b a C h t g n e L e l b a C e z i S / e r o C d a l C X R t u p n I r e w o P ) n i m ( X R t u p n I r e w o P ) t a s ( X T t u p t .
Gigabit “ twister ” and SONET “ twister ” 17 BWDM Interface Connector ________________________________________________________ SC Supported Link Length ________________________________________.
18 User Guide Product Safety , EMC and Compliance Statements This equipment complies with the following requirements: •U L • CSA • EN60950 (safety) • FCC Part 15, Class A • EN55022 Class A (.
Gigabit “ twister ” and SONET “ twister ” 19 W arranty and Servicing Three-Y ear W arranty for the Metrobility “twister” Metrobility Optical Systems, Inc. warrants that every “twister” product will be free from defects in material and workmanship for a period of THREE YEARS.
Product Manuals The most recent version of this manual is available online at http://www .metrobility .com/support/manuals.htm Product Registration T o register your product, go to http://www .metrobility .com/support/registration.asp 25 Manchester Street, Merrimack, NH 03087 tel: 1.
Een belangrijk punt na aankoop van elk apparaat METRObility Optical Systems 2152-1M-01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen METRObility Optical Systems 2152-1M-01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens METRObility Optical Systems 2152-1M-01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding METRObility Optical Systems 2152-1M-01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over METRObility Optical Systems 2152-1M-01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van METRObility Optical Systems 2152-1M-01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de METRObility Optical Systems 2152-1M-01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met METRObility Optical Systems 2152-1M-01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
