Gebruiksaanwijzing /service van het product Mecablitz 58 AF-2 van de fabrikant Metz
Ga naar pagina of 44
MECABLITZ 58 AF-2 digital für/for Nikon-Digitalkameras, incl. CLS-System Bedienungsanleitung Mode d’emploi Gebruiksaanwijzing Operating instruction Manuale istruzioni Manual de instrucciones 709 47 0159.
ķ 1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 2 Dedicated flash functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 2.1 Division into camera groups .
115 ķ Introduction Thank you for purchasing a Metz product. W e are happy to welcome you as a customer . Of course, you are excited to start using the flash unit right away . However , it is worthwhile reading the operating instructions first to lear n how to use the flash correctly .
116 ķ 2 Dedicated flash functions Dedicated flash functions are flash functions that have been specially adapted to a given camera system. Depending on the type of camera, different flash func- tions are supported.
117 ķ be set manually on the camera. Using lenses not equipped with a CPU (i.e., lenses without auto focus mode), results in cer tain functional limita- tions. 3 Preparing the flash unit for use 3.1 Mounting the flash unit Mounting the flash unit on the camera T urn off the camera and flash before mounting or removing.
118 ķ 3.4 Power Pack P76 (optional accessor y) If a batter y-operated flash does not meet your needs in terms of number of flas- hes and recycling times, a Power Pack P76 (optional) can be connected to the flash unit to provide extra power . A V58-50 connecting cable (optional) is necessar y for connecting the Power Pack P76 to the flash unit.
119 ķ • Set the flash mode of your choice ( , automatic , manual l, etc.) using the and arrows. The flash mode you choose is then highlighted. The settings take effect immediately . • Press the button , and the display changes back to the normal view .
120 ķ Setting procedure: • Press the button until „Mode“ flashes on the LC display . • Set the flash mode using the and arrows. The flash mode you choose is then highligh- ted. The setting takes effect immediately . • Press the button to change the display back to the normal view .
121 ķ Group B: • Matrix-controlled fill-in flash mode. • Settings made on flash unit. • Display on flash unit after saving: BL Group C: • 3D multi-sensor fill-in flash mode. • Settings made on flash unit. • Display on flash unit after saving: BL Group D: • D-TTL 3D flash mode.
122 ķ 5.5 Automatic fill-in flash mode When shooting in automatic fill-in flash mode in daylight, the automatic flash mode will automatically set a correction of between -1 and -2 f-stops to compensate for flash exposures (see 6.4 and 10.5). This has a graduated lightening effect on shadowy areas, which has a natural appearance on the photograph.
123 ķ Setting procedure: • Press the button until „Mode“ flashes on the LC display . • Choose the flash mode using the and arrows. The flash mode is then highlighted. The setting takes effect immediately . • Press the button to change the LC display back to the normal view .
124 ķ 6 Flash parameters (Parameter menu) For the flash unit to operate correctly , various flash parameters such as the zoom position of the main reflector , aper ture, ISO light sensitivity , etc. have to be adjusted to match the camera. When using the flash unit with cameras in Group A (see table 1), these parame- ters have to be set by hand.
125 ķ 6.2 Aper ture (F) If there is no digital data transfer between the camera and flash unit, for exam- ple with cameras from Group A (see table 1) or when using non-CPU-capable lenses, the aperture can be manually set from 1.0 to 45 (at ISO 100), in full f- stop inter vals.
126 ķ 6.4 Flash exposure correction (EV) Manual flash exposure correction (EV) can help offset extreme dif ferences in contrast between the subject and background. Corrections from -3 f-stops (EV) to +3 f-stops (EV) can be made, in 1/3 increments (also see 10.
127 ķ 6.6 Manual par tial light output (P) In the manual mode and the strobe mode , the light output can also be adjusted to fit the shooting situation with the manual partial light output para- meter (P). Settings in manual flash mode M range from P 1/1 (full light output) to P 1/256, in inter vals of 1/3.
128 ķ • Press the key to confirm the special function selection. • Choose the setting desired using the and arrows. The setting takes effect immediately . • Press the button repeatedly to return the display to its normal reading. If the button is not pres- sed, the display will change back to the normal view after about 5 seconds.
129 ķ 7.3 Flash Bracketing Series (FB) A series of flash exposures (flash-bracketing FB) can be carried out in the and automatic flash modes. A flash bracketing series consists of three successive flash shots with different flash exposure correction values.
130 ķ Example: The focal length of the camera lens is 50 mm. The extended zoom mode sets a 35 mm reflector position on the flash unit. However , 50 mm continues to be shown on the display . • When „Ext ON“ is displayed, the extended zoom mode is activated.
131 ķ 7.6 Cordless remote mode (Remote) • When „Remote OFF“ appears, the cordless remote mode is deactivated. • When „Remote Master“ appears, the flash unit is operating as a guiding master flash unit on the camera. • When „Remote Slave“ appears, the flash unit is operating completely as a sla- ve flash unit.
132 ķ 7.8 Secondar y reflector The secondar y reflector is used for frontal brightening in the case of indirect ligh- ting when the main reflector is pivoted to the side or upwards (see 10.3). If the secondar y reflector produces too much light, it can be reduced to 1/2 or 1/4 .
133 ķ 7.10 Auto OFF Function (Standby) T o save batter y power and prevent inadver tent batter y discharge, the flash unit is factor y-set to automatically switch over to standby mode, while flash re.
134 ķ 7.11 KEYLOCK The KEYLOCK function enables the user to lock the buttons on the flash unit to prevent them from inadvertently being pressed. When the KEYLOCK function is activated, a symbol appears on the display above the two middle but- tons.
135 ķ 8 Motor Zoom Reflector The zoom position of the main reflector can be adjusted for focal lengths of at least 24 mm (35 mm format). For lenses with focal lengths of 12 mm or more, the integrated wide-angle diffuser can be positioned over the main reflector .
136 ķ 10 Flash techniques 10.1 Bounce flash Bounce flash illuminates the subject more softly and reduces dense shadows. It also reduces the drop in light from foreground to background that occurs for physical reasons. The main reflector of the flash unit can be swivelled horizontally and tilted vertically for bounce flash.
137 ķ 10.5 Manual flash exposure corrections The auto flash exposure mode of the flash unit, as of most cameras, is adjusted to a reflection factor of 25% (the average reflection factor of flash subjects).
138 ķ 13 Correct exposure indication The correct exposure indication „OK“ only lights up if the shot was correctly exposed in TTL flash mode (3D-TTL, D–TTL, i-TTL, etc.) or automatic flash mode. If no „OK“ exposure indication appears after the shot, then the shot was underexposed.
139 ķ 16 Flash range indication The maximum flash range is indicated on the display panel of the flash unit. The value indicated relates to subjects with a reflection factor of 25%, which applies to most photographic situations.
ķ 17 Flash exposure memor y Some Group E cameras (see T able 1) have flash exposure memor y (FV memo- r y). This is supported by the flash unit in i-TTL flash mode. It can be used to defi- ne and store the exposure level for the subsequent shot before the shot is actual- ly taken.
141 ķ 18.4 Automatic FP high-speed synchronisation V arious Group E cameras (D2Hs and D200, for example) suppor t automatic FP high-speed synchronisation (see the camera’ s operating instructions). This flash mode makes it possible to use a flash unit even with shutter speeds that are faster than the flash sync speed.
142 ķ 21 Wireless remote operation Wireless remote operation is compatible with the Nikon Advanced Wireless Lighting system. In this system, the exposure of one or more slave flash units is controlled remotely by a master flash unit on the camera.
143 ķ 21.2 Settings on the master flash unit • Use the key to access, in succession, the settings for the master flash unit M and the slave groups A, B, and C. • While M, A, B or C is displayed, use the key to set the flash mode (TTL or M). If no flash mode is displayed, the master or group is deactivated.
144 ķ 21.5 Ser vo mode The Ser vo mode is a simple slave mode in which the slave flash unit always triggers a flash as soon as it receives a light pulse. Adjustment procedure for ser vo flash mode • Select a mode for the camera flash unit without pre-flash.
145 ķ 22 Care and maintenance Remove dust and grime with a soft dr y cloth or silicon-treated cloth. Do not use cleaning agents as these may damage the plastic parts. 22.1 Firmware updates The flash unit’ s fir mware can be updated through the USB port and adjusted to the technical requirements of future cameras (Firmware Update).
146 ķ A batter y symbol appears on the display • There is a Metz Power Pack P76 connected to the mecablitz and there are batteries in the batter y compartment of the mecablitz. Remove batteries from the mecablitz. The AF measuring beam of the flash unit is not activated.
147 ķ Automatic switching to the flash sync speed fails to occur . • The camera has a between-the-lens shutter (as do most compact cameras), Switching to sync speed is therefore unnecessar y . • The camera operates with FP high-speed synchronisation (camera setting).
222 T abelle 3: Leitzahlen bei maximaler Lichtleistung (P 1/1) T ableau 3: Nombres-guides pour la puissance maximale (P 1/1) T abel 3: Richtgetallen bij vol vermogen (P 1/1) T able 3: Guide numbers at.
223 T abelle 4: Blitzleuchtzeiten in den T eillichtleistungsstufen T ableau 4: Durée de l’éclair pour les dif férents niveaux de puissance T abel 4: Flitsduur en deelvermogensstappen T able 4: Fl.
224 T abelle 5: Kameraverschlusszeiten im Stroboskop-Betrieb T ableau 5: Vitesses d’obturation du reflex en mode stroboscope T abel 5: Belichtingstijden bij de stroboscoopfunctie T able 5: Camera sh.
225 Batterietyp Blitzfolgezeiten Blitzanzahl T ype de pile/accu T emps de recyclage Nombre d’éclairs T ype voeding Flitsvolgtijden Aantal flitsen Batter y type Rec ycling times Number of flashes Tipo batterie T empi di ricarica Numero ampi Tipo de pila Tiempo de secuencia de dest.
226 Ihr Metz-Produkt wurde mit hochwertigen Materialien und Komponenten entworfen und hergestellt, die recycelbar sind und wieder ver wendet werden können. Dieses Symbol bedeutet, dass elektrische und elektronische Geräte am Ende ihrer Nutzungsdauer vom Hausmüll getrennt ent- sorgt werden müssen.
227 Hinweis: Im Rahmen des CE-Zeichens wurde bei der EMV-Prüfung die korrekte Belichtung ausgewertet. SCA-Kontakte nicht berühren ! In Ausnahmefällen kann eine Berüh- rung zur Beschädigung des Gerätes führen. Ķ Remarque: L ’exposition correcte a été évaluée lors des essais de CEM dans le cadre de la certification CE.
Anschluß Power Pack Prise pour Power Pack Aansluiting Power-Pack Power pack connection Presa per Power Pack Conexión Power Pack Firmwareupdate-Buchse Mise à jour du micrologiciel Updaten van de fir.
Display Display Mode Para Sel Sel TTL E-TTL*/ P-TTL* TTL-BL E-TTL-HSS*/ P-TTL-HSS* A M M-HSS* Mode-Menü* Parameter-Menü** Select-Menü (Sonderfunktionen**) W erkseinstellung (Reset) Display Mode Para Sel Display + Para — F M-Zoom EV ISO 1,0 .
709 47 0159.A1 Ķĸńķƴį Plastics technology Metz - W erke GmbH & Co KG • Postfach 1267 • D-90506 Zirndorf • info@metz.de • www .metz.de Metz - always first class. Consumer electronics Photoelectronics 709 47 0159.A1 58AF-2 Ni Print 26.
Een belangrijk punt na aankoop van elk apparaat Metz Mecablitz 58 AF-2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Metz Mecablitz 58 AF-2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Metz Mecablitz 58 AF-2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Metz Mecablitz 58 AF-2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Metz Mecablitz 58 AF-2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Metz Mecablitz 58 AF-2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Metz Mecablitz 58 AF-2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Metz Mecablitz 58 AF-2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
