Gebruiksaanwijzing /service van het product MF 55TK36 van de fabrikant Metz
Ga naar pagina of 26
Palma MF 55TK36 – V T Stereo Operating instructions.
.
- 1 - Contents Remote control handset RK18 .............. 2 Control Panel Buttons ............................ 3 Antenna Connections ............................. 3 Preparation ............................................. 4 Features .................
- 2 - Infra-red light! Do not point the remote control handset at your eyes and press any of the buttons on it! Remote control handset RK18 The remote control handset sends its commands to the TV set with the aid of infra-red light. For this reason, it must always be pointed towards the TV set in order to operate correctly.
- 3 - Control Panel Buttons Antenna Connections.
- 4 - Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moder- ate climates. Features It is a remote controlled colour television.
- 5 - 9. X-rays The x-rays generated in this television are shielded sufficiently. 10. Naked Flame Sources Do not place naked flame sources on the apparatus. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays.
- 6 - Before Switching on your TV Power connection IMPORTANT: The TV set is designed to op- erate on 230V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you con- nect the set to the mains.
- 7 - Operating the TV You can operate your TV both using the remote control handset and onset but- tons. A.P.S. (Automatic Programming System) " PLEASE, CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM " message will be displayed when you turn on your TV for the first time.
- 8 - Programme Selecting (Previous or next programme) Press P- button to select the previous pro- gramme. Press P+ button to select the next pro- gramme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9.
- 9 - Sound Menu T o change sound settings Enter the Sound Menu directly , pressing the RED ( ) button or , As you enter the main menu, sound will be the first selected option. In the main menu, select SOUND using P+ or P- button, then enter the sound menu pressing or button.
- 10 - Setting Effect You can use this feature to switch the sound effect on and off. Pressing or button will turn on and off this feature. If the current sound system is MONO and the sound ef- fect is set ON , then the sound will be heard as if it is STEREO .
- 11 - Setting Headphone Balance When balance control is in mid position, the cursor is displayed with the two reciprocal arrows. Using P+ or P- button select Balance. Press button to change balance rightwards. Press button to change balance leftwards.
- 12 - Setting Sharpness Using P+ or P- button select Sharpness. Press button to increase peaking level. Press button to decrease peaking level. Mode This item is used to change the picture size. By pressing or button you may choose one off three options.
- 13 - It is displayed on the upper right of the screen. If sleep timer is activated it is dis- played with the TV status and erased with it after 3 seconds. If there is left only one minute of the down counting of the timer, it is displayed auto- matically on the upper right of the screen, and stayed there until finishing.
- 14 - For band C, 01 - 83. For band S, 01 - 41. Standard The "Standard" setting is fixed to "BG" . You cannot change this item's setting. Selecting Search To start the search process, press but- ton for forward search or button for back- ward search.
- 15 - pressed to the RED ( ) button ( NAME ). The first letter begins to blank on the se- lected name. To change that letter P+ or P- button can be used, and to select the other letters, or button can be used.
- 16 - press or button. To cancel APS dur- ing running press or button. After APS is finalized, a programme list will apper on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.
- 17 - To cancel mute, there is two alternative; the first one is pressing to " " button, thus vol- ume is set to the preceding value, and the second one is increasing the volume level, thus it starts at the minimum level to in- crease.
- 18 - To Select Index Page T o select the page number of the index (gen- erally page 100), press button. To Select Teletext with a TV Programme Press button. The text is now superim- posed over the programme on the screen. Press button again to return to the T e l e - text page.
- 19 - Press an appropriate RED ( ), GREEN ( ), YELLOW ( ) or BLUE ( ) button in order to reach the relevant p age quickly . For T optext If Toptext transmission is present, colour coded buttons will appear in status row. If Toptext transmission is not present, status row will not appear.
- 20 - DECODER FOR SATELLITE RECEIVER VIDEO HEADPHONE AUDIO Connect Peripheral Equipment.
- 21 - Copy Facility Source selection for VCR recording. Select Features Menu in the Main Menu. Select A V -2 OUTPUT source pressing or button. Camera and Camcorder T o connect to Front-A V input ( F AV): Connect your camera or camcorder at the front side of your TV.
- 22 - Sound is coming from only one of the speak- ers. Is the balance set to one direction ex- treme? See SOUND menu. Remote Control Your TV no longer responds to the remote control. Press the TV button on the remote control once more. Perhaps the batteries are exhausted.
.
Metz - W erke GmbH & Co KG • Postfach 1267 • D-90506 Zirndor f • info@metz.de • www .metz.de Metz. Always first class. Unterhaltungselektronik Fotoelektronik Kunststofftechnik Industrieele.
Een belangrijk punt na aankoop van elk apparaat Metz MF 55TK36 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Metz MF 55TK36 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Metz MF 55TK36 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Metz MF 55TK36 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Metz MF 55TK36 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Metz MF 55TK36 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Metz MF 55TK36 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Metz MF 55TK36 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
