Gebruiksaanwijzing /service van het product SP648B van de fabrikant MicroNet Technology
Ga naar pagina of 33
User’s Ma nual EtherFast 10/100M Smart Switch Model No.: SP648B http://www.micronet.info.
FCC Warning This equipment has been tested and fo und to comply with the r egulations for a Class A digital de vice, pursuant to Part 15 of the FC C Rules. Thes e limits are de signed t o provide reasonable protection agains t harmful interfere nce when the equ ipment is op erated in a commercial environment .
UL Warning a) Elevated Operating Ambient Tem perature- If installed in a closed or multi-unit rack assembly, the operating am bient temperature of the rack environm ent may be greater than room am bient.
.
i Table of Content ------------------------------------------------------------ About This Guide.................................................................................................................1 Purpose ................................
ii Configuring Se tup Setting.............................................................................................. 19 Port Settings ..............................................................................................................
1 ABOUT THIS GUIDE Congratulations on your pur chase of the 48+4G- Port 10/100/1000 Mbps Gigabit Eth ernet Web Smart S witch. This de vice integrat es 1000Mbps Gigabit Et hernet, 100Mb ps Fast Ethernet and 10Mbp s Ethern et network capabilities in a highly flexible package.
2 INTRODUCTION This chapter describ es the features of the 48+4G -Port 10/100/1000Mbps Giga bit Ethernet Web Smart Switch and some background info rmation about Ethernet/Fast Ethernet/Gigabit Ethernet switching techno logy. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.
3 100Mbps Fast Ethernet is a s tandard specifi ed by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps Ethernet standard with the ability to transmit and receive data at 100Mbps, w hile mainta ining the CSMA/ CD Ether net protocol.
4 VLAN (Virtual Local Area Network) A VLAN is a gro up of end-st ations that are not constraine d by their phys ical location and can communicate as if a common broa dcast domain, a LAN. The primary utility of using VLAN is to r educe late ncy and need for route rs, using fa ster switchin g instead.
5 Easy setting via W e b Management Utility Standa rd 19” Rack-m ount size.
6 UNPACKING AND INSTALLATIO N This chapte r provides unpacking and install ation inform ation fo r the Swi tch. Unpacking Open the shippi ng cartons o f the Switch a nd carefully unpacks its contents.
7 Figure 1. Combine the Switch with the pro vided screws Then, use scre ws provided with the equi pment rac k to mount eac h switc h in the rack. Figure 2.
8 IDENTIFYING EXTERNAL COMP ONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front pan els of the Switch.
9 Rear Panel Figure 4. Rear panel of the Swi tc h AC Power Connector: This is a three-pronged connector t hat sup ports the power cord. Plug in the female connector of t he provided power cor d into thi s connector, and the m ale into a power outlet. Supported i nput vol tages ran ge from 100-240V AC at 50- 60Hz.
10 UNDERSTANDING LED INDI CATORS The front panel LEDs provi des instant status feedback, a nd, helps m onitor and troubleshoot when neede d. Figure 5. LED indicat o rs of the Swit ch Power and System LEDs POWER: Power Indicator On : When the Power LED lights on, the Switch is receiving power.
11 Off : No link. SPEED: On (Green) : When the green light is on, the respective port is connected to a 1000Mbps Gigabit Ethernet network. On (Amber) When the Amber light is on, the respective port is connected to a 100Mbps Fast Ethernet network.
12 CONFIGURATION Through the Web Browser you can co nfigure the S witch such as VLAN, Trunki ng, QoS… etc. With the attached Web Management Utility, you can easily d iscover all the Web Management Switch, assi gn the IP Address, c hanging the password a nd upgradin g the new firmware.
13 Discovery List This is the list where you can discover all th e Web management devices in the entire network. By pressing t he “Disco very” button, you can li st all the Web M anagem ent devices in the discovery list. Double click or press the “Add to monitor list” button to select a device from the Discovery List to the Monitor List.
14 View Trap: The Trap function can receive the ev ents that happen from the Web Management Switch in the Monito r List. There is a light indicator be hind the “View Tra p” button, when th e light.
15 The factory default password is "admin". Figure 9. Configuration Setting Password Ch ange: You ca n use this Pas sword Chan ge when yo u need to cha nge the password, fill in the password n eeded in the dialog box and p ress “Set” button to pro ceed the password c hange imm ediately.
16 Toolbar The toolbar in the Web Management Utility have four main tabs, File, View, Options and Help. In the “File TAB” , there are Monitor Save, Monitor Save As, Monitor Load and Exit.
17 Login Before you configur e this device, note that when the Web Smart Switch is configured through an Ethernet connection, m ake sure the manager P C must be set on sam e the IP network . For example, when the default network ad dress of the default IP address of the Web Smart Switch is 192.
18 Figure 14. Device Status Setup Menu When the main pa ge appears , find the Setup menu in the left side of the screen (Figure 15). Click on the setup item that you want to configure.
19 Configuring Setup Setting Find that there are four items, including Port S ettings, VLAN Settings and Trunk Settings in Setup m enu. Port Settings In Port Settings menu (Figure 16), this page will show each port’s status, press the ID parameter to set each port’s Speed, Flow Control , and QoS priori ty .
20 This setting h as six modes — 100M F ull , 100M Half , 10M Full , 10M Half, Auto and Disable —for speed or port disable selections. Note: If speed set to be exist 100M full mode or 10M full mode, flow control have fixed setting to disable Flow Control: This setting determines whether or not the Switch will be handling flow control.
21 Figure 20. VLAN Settings Once you wa nt to modify th e VLAN Gro up, check on t he ID parameter, t he ID VLAN configuration window will po p out. Figure 21. VLAN Gr oup Change Note 1 : group 1 and Group 2 can not be m anaged at the same time Note 2:When add a new Vlan, the members of default Vl an 1 are removed automatically.
22 Device Status Click on the “Status” to presen t the device status on this screen, it will show the System Status, Port Status, VLAN Status and Trunk Status . Press “Refresh” when you need to renew the posted information. Statistic The Statistic Menu screen will show the status of each port p acket count.
23 Figure 24. System Setting The System Setting includ es the System name, Location name, Logi n Timeout, IP Address, Subnet Mask and Gateway. Through th e Web Management Utility, you can easily recognize the device by using the System Nam e and the Location Name.
24 Figure 26. Trap Setting System Events: Monitoring the system’s trap. Device Bootup: a trap whe n booting up the system . Illegal L ogin: a trap when there is using a wro ng password login, and it will reco rd from where the IP to be login. Fiber Port Events: Monitoring the Fiber port status.
25 To restore a current setting file to the device, you must specify the backup file and press “Restore” button to proceed the setting of the recorded file. Figure 28. Backup Set t i ng Note: when restoring a recorded file, the current password will not be erased.
26 TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet IEEE 802.
27.
Een belangrijk punt na aankoop van elk apparaat MicroNet Technology SP648B (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen MicroNet Technology SP648B heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens MicroNet Technology SP648B vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding MicroNet Technology SP648B leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over MicroNet Technology SP648B krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van MicroNet Technology SP648B bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de MicroNet Technology SP648B kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met MicroNet Technology SP648B . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
