Gebruiksaanwijzing /service van het product 2005 van de fabrikant Microsoft
Ga naar pagina of 32
Deployment Guide Deploying Microsoft Of fice Live Communications Server 2005 and the F5 BIG-IP L TM System v9.
1 Introducing the BIG-IP and Live Communications Server 2005 Enterprise Edition configuration Microsoft® and F5 have collaborated on a highly effective way to intelligently direct traffic for Microsoft Office Live Commun ications Server 2005 Enterprise Edit ion with the F5 BIG-IP® appli cation traffic management device.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 2 Configuration example The Live Communications Server 2005 Enterprise Edition introduces the concept of a pool. Multiple Li ve Communications Se rvers communicate with a single back-end SQL Serv er (or cluster of servers).
3 Configuring the BIG-IP and Live Communications Server for deployment To configure the BIG-IP and Live Communications Server for integ ration, you need to com plete the following procedures: • Conn.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 4 2. Type your user name and password, and click OK . The Welcome screen opens. Once you are logged onto the BI G-IP LTM system, the Welcome screen of the new Configuration utility open s.
5 Creating a self IP Self IP addresses are the IP addres ses owned by the BI G-IP LTM system that you use to access the internal and ex ternal VLANs. The next step in this configuration is to create a self IP address for the VLAN we created in the preceding procedure.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 6 2. Click the Create button. The New Monitor screen opens. 3. In the Name box, type a name for the Monitor. In our example, we type lcs_monitor .
7 on the BIG-IP device that contain the Live Communications Servers, one for TLS (Transport Layer Secu rity) traffi c and one for RPC (Remote Procedure Call) traffic. Creating the TLS pool The first pool we create is for TLS traffic. 1. On the Main tab, expand Local Traffic , and then click Pools .
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 8 8. In the Resources section, from the Load Balancing Method list, choose your preferred load bala ncing method (different load balancing methods may yi eld optimal results for a particular network).
9 Creating the RPC pool The next pool is for RPC traffic. 1. On the Main tab, expand Local Traffic , and then click Pools . The Pool screen opens. 2. In the upper right portion of the screen, click the Create button. The New Pool screen opens. 3. From th e Configuration list, select Advanced .
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 10 Creating a profile BIG-IP version 9.
11 8. Click the Finish ed button. Figure 7 Creating the TCP profile For more inf ormation on creatin g or mo difying profiles, or applying profiles in general, see the BIG-IP documentation.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 12 3. In the Name box, type a name for this virtual server. In our example, we type tls_virtual . 4. In the Destination section, select the Host option button.
13 10. Click the Finished button. For additional informat ion about configuring a vir tual server, click the Help butto n. Creating the RPC virtual server The next virtual server we create references the rpc_pool . To create the RPC virtual server 1. On the Main tab, expand Local Traffic , and then click Virtual Servers .
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 14 7. In the Configuratio n section, from th e Type list, select Forwar ding (IP) . 8. From the Protocol list, select All Protocols .
15 To create a SNAT 1. On the Main tab, expand Local Traffic , and then click SNATs . The SNATs screen opens. 2. In the upper right portion of the screen, click the Create button. The New SNAT screen opens. 3. In the Name box, type a name for this SNAT.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 16 In a redundant configuration , you also need to configure a Floatin g Self IP address for the VLAN on both devices.
17 Using Access Proxy and Director with the BIG-IP LTM system for remote access The Live Communications Server 2005 produ ct allows the network of an organization to federate (peer) with other Li ve Communications Server-enabled networks for core presence and instant messaging.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 18 WA R N I N G There are a wide variety of ways to deploy the BIG-IP LTM system with Access Proxy and Director devices , and the configurati on depends on your network configuration.
19 Configuration example In this configurati on, th ere are BIG-IP devices on both s ides of the array of Access Proxy devices, to direct traffic for inbound and outbound traffic.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 20 Prerequisites The following are prerequisites to the Access Proxy configuration.
21 • Creating the self IP on the outsid e BIG-IP LTM system • Configuring a health monit or • Creating a pool for the Access Proxy d e vices on the outside BIG-IP LTM system • Creating the TCP.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 22 Configuring a health monitor The next step in this configuration is to configure a health moni tor on the BIG-IP LTM system for the Access Proxy devices.
23 6. The other fields in the Config uration section are o ptional. Configure these fields as applicable for your network. (For additional information about configuri ng a pool, click the Help button.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 24 Creating the virtual server on the outside BIG-IP LTM system After you define the pool, the next step is to define the followin g virtual server on the BIG-IP devices to load balance the traffic to the Access Proxy pool.
25 Configuring the inside BIG-IP LTM system The next section of this deployment is to configure the in side BIG-IP LTM system (as shown in Figure 12). On the inside BIG-IP LTM system, you need to comp.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 26 To create a pool for the Ac cess Proxy devices from the Configuration utility 1. On the Main tab, expand Local Traffic , and then click Pools .
27 A Director is a Pool (typically a Enterprise Edition serv er) with no locally homed users, and acts as a authorizat ion/AD-routin g proxy for outsid e users and domains, protecting internal Li ve Communications Servers against unauthenticated SIP traffic.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 28 Creating the TCP profile The next step is to create a TCP prof ile. To create this TCP profile, use the procedure Creating the TCP profile , on page 23.
29 a pool for the next hop server in the enterpri se network , on page 26. In our example, this is internal_n exthop_pool , the virtual server IP address is 10.
Deploying Microsoft Office Live Communications Server 2005 and th e F5 BIG-IP LTM System v9 BIG-IP® Deployment Guide 30 Appendix A: Backing up and restoring the BIG-IP system configuration We recommend saving your BIG-IP conf i guration before you begin th is configuration.
31 3. In the Restore a Configuration section, choose the configuration file you want to restore from the list box, or type the pat h where your configuration files were saved. 4. Click the Restore button. To check the status of th e restoration, click the View Log button .
Een belangrijk punt na aankoop van elk apparaat Microsoft 2005 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Microsoft 2005 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Microsoft 2005 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Microsoft 2005 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Microsoft 2005 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Microsoft 2005 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Microsoft 2005 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Microsoft 2005 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
