Gebruiksaanwijzing /service van het product CP-D31N van de fabrikant Microsoft
Ga naar pagina of 52
1 • Microsoft ® and Internet Explorer ® , Windows ® , Windows Vista ® are registered trademark of Microsoft Corporation in the U.S. and/or other countries.
2 Content Content Content .......................................................................................... 2 1. Main functions .......................................................................... 3 1.1 Configuring and controlling via a web browser .
3 1. Main functions 1. Main functions 1.1 Configuring and controlling via a web browser Y ou can adjust or control the projector via a network from a web browser on a computer that is connected to the same network. Logon the network from the web browser and it offers the menus to configure the network settings, monitor the projector and so on.
4 1. Main functions 1.3 Messenger Function The text data can be sent via the network and displayed on the screen. Y ou can display the transferred text on real time or choose one from ones once stored in the projector and display it. ( 42 ) 1 4 3 2 T ransfer text data Display text data (ex.
5 2. Equipment connection and network setting 2.1 R equir ed equipment prepar a tion 2. Equipment connection and network setting The following equipments are required to connect the projector to your computer through the network.
6 2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and computer with a LAN cable. * Before connecting with an existing network, contact the network administrator . Next, please check the computer setting as explained below .
7 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 7) Set IP address, subnet mask and default gateway for computer . Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window 5) Open “Local Area Connection Properties” window you use for network device.
8 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your computer should be common with projector ’ s one.
9 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.2.3.c) Fig. 2.2.3.b “Internet Properties” window 2.
10 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.4 “Logon Menu” 2.2.4 Check connection Check computer and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not.
11 3. Network Functions 3.1 Configuring and Controlling the Pr ojector via a W eb Browser Y ou can change the settings of or control the projector via a network by using a web browser from a computer that is connected to the same network. ( 12 ) 3.
12 3. Network Functions 3.1 Configuring and Controlling the Pr ojector via a W eb Browser Y ou can adjust or control the projector via a network from a web browser on a computer that is connected to the same network. • Internet Explorer ® 5.5 or later is required.
13 3. Network Functions When configuring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs.
14 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.1 Logon Refer to the following for configuring or controlling the projector via a web browser . 1) Enter “http://192.168.1.10/” into the address bar of the web browser and press “Enter” key or click “ ” button.
15 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.2 Network Infor mation All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID.
16 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.3 Network Settings Displays and configures network settings. Item Description IP Configuration Configures network settings. DHCP ON Enables DHCP .
17 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 (Port:23) Configures command control port 1 (Port:23).
18 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) Item Description SNMP Port Configures the SNMP port. Port open Click the [Enable] check box to use SNMP . T rap address Configures the destination of the SNMP Trap in IP format.
19 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings Displays and configures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function.
20 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.6 Aler t Settings Displays and configures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly fixed.
21 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) The Alert Items are shown below . Setting Item Description Alarm Time Configures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm .) SNMP T rap Click [Enable] check box to enable SNMP Trap alerts.
22 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Sunday Configures the Sunday schedule.
23 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) The schedule settings are shown below . Item Description Schedule Click [Enable] check box to enable the schedule. Date (Month/Day) Configures the month and date.
24 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and configures the date and time settings. Item Description Current Date Configures the current date in year/month/day format.
25 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) Item Description Time difference Configures the time difference. Set the same time dif ference as the one set on your computer . If unsure, consult your IT manager .
26 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and configures passwords and other security settings. Item Description Administrator authority Configures the Administrator ID and password.
27 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) Click [Apply ] button to save the settings. • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection.
28 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.10 Projector Contr ol Controls the projector . Item Description Main Power T urns the power on/off. Input Source Selects the input source. Picture Mode Selects the picture mode setting.
29 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) Item Description Image Aspect Selects the aspect setting. Over Scan Adjusts the over scan setting. V Position Adjusts the vertical position. H Position Adjusts the horizontal position.
30 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) Item Description Audio V olume Adjusts the volume setting. Speaker T urns the built-in speaker on/off. Audio Source - Computer in1 Assigns the AUDIO SOURCE- COMPUTER IN1 input port.
31 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) Item Description Option Auto Search T urns the automatic signal search function on/off. Direct Power On T urns the direct power on function on/off. Auto Power Off Configures the timer to shut off the projector when no signal is detected.
32 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.11 Projector Status Displays the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp.
33 3. Network Functions 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.12 Network Restar t Restarts the projector ’ s network connection. Item Description Restart Restarts the projector ’ s network connection in order to activate new configuration settings.
34 3. Network Functions 3.2 E-mail Aler ts The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error . • Up to five e-mail addresses can be specified.
35 3. Network Functions 3.2 E-mail Alerts (continued) 8) Click [Alert Settings] on the main menu to configure the E-mail Alerts settings. 9) Select and configure each alert item. Refer to the item 3.1.6 Alert Settings ( 20 ) for further information.
36 3. Network Functions 3.3 Projector Mana gement using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.
37 3. Network Functions 3.4 Ev ent Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector . • Y ou can schedule the following control events: Power ON/OFF , Input Source, T ransferred Image Display and T ransferred T ext Display .
38 3. Network Functions • In Standby mode the power indicator will flash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet.
39 3. Network Functions • A Network Restart is required after the Daylight Savings Time or SNTP configuration settings have been changed. • The battery for the built in clock may be dead if the clock loses time even when the date and time have been set correctly .
40 3. Network Functions 3.5 MY IMAGE (Still Image T ransfer) Display The projector can display still images that are transferred via the network. • It is possible to allocate the image file up to 4 in the maximum. • Using MY BUTT ON that registered MY IMAGE can display transferred image.
41 3. Network Functions 3.5 MY IMAGE (Still Image T ransfer) Display (continued) Configure the following items from a web browser when MY IMAGE is used. Example : If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.
42 3. Network Functions 1 4 3 2 3.6 Messenger Function The projector can display the text data transferred via the network on the screen. The text data can be displayed on the screen in two ways that .
43 3. Network Functions 3.6 Messenger Function (continued) Configure the following items from a web browser when Messenger function is used. Example : If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser .
44 3. Network Functions 3.7 Command Control via the Networ k Y ou can configure and control the projector via the network using RS-232C commands. Communication P or t The following two ports are assigned for the command control. Command Control Settings ( 17 ) Configure the following items from a web browser when command control is used.
45 3. Network Functions 3.7 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. ( 26 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password.
46 3. Network Functions 3.7 Command Control via the Network (continued) Command F or mat Command formats differ among the dif ferent communication ports. ● TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands.
47 3. Network Functions Reply Data f or mat The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data.
48 3. Network Functions 3.7 Command Control via the Network (continued) Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. The projector does not accept commands without authentication success when authentication is enabled.
49 3. Network Functions 3.8 Controlling the exter nal de vice via the pr ojector (using the NETWORK BRIDGE function) This projector is equipped with the NETWORK BRIDGE function to perform mutual conversion of a network protocol and a serial interface.
50 3. Network Functions 3.8.2 Communication setup 3.8.3 Communication por t 1) Using the COMMUNICA TION TYPE menu, select the NETWORK BRIDGE for the CONTROL port. 2) Using the SERIAL SETTINGS menu, select the proper baud rate and parity for the CONTROL port, according to the specification of the RS-232C port of the connected device.
51 3. Network Functions 3.8.4 T r ansmission method 3.8.4.1 HALF-DUPLEX The transmission method can be selected from the menus, only when the NETWORK BRIDGE is selected for the COMMUNICA TION TYPE.
52 3. Network Functions • With using the HALF-DUPLEX method, the projector can send out 254 byte data as maximum at once. • If it is not required to monitor the response data from an external devi.
Een belangrijk punt na aankoop van elk apparaat Microsoft CP-D31N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Microsoft CP-D31N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Microsoft CP-D31N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Microsoft CP-D31N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Microsoft CP-D31N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Microsoft CP-D31N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Microsoft CP-D31N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Microsoft CP-D31N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
