Gebruiksaanwijzing /service van het product 10014080 van de fabrikant Miele
Ga naar pagina of 76
Oper ating Instructions Dishwasher T o prevent accidents and machine damage, read these instructions be‐ fore installation or use. en-US M.-Nr . 10 014 080 HG05.
Contents 2 IMPORT ANT SAFETY INSTRUC TIONS ................................................................. 4 Guide to the dishwasher ..................................................................................... 13 Appliance overview ........
Contents 3 Options .................................................................................................................. 38 Short ........................................................................................................
IMPORT ANT SAFETY INS TRUCTIONS 4 This dishwasher complies with current safety r equirements. Inap‐ pr opriat e use can, however , lead to personal injury and damage to property .
IMPORT ANT SAFETY INS TRUCTIONS 5 Correct use This dishwashe r is intended for use in domestic households and similar residential envir onments. This dishwasher is not suitable for outdoor use. It must only be used as specified in these oper ating instructions for cleaning domestic dishware and cutlery .
IMPORT ANT SAFETY INS TRUCTIONS 6 Safety with children Chil dren must be k ept away from the appliance unless they are constantly supervised. Chil dren should be supervised t o ensure that they do not play with the appliance. Keep small childr en away from the appliance at all times to avoid the risk of injury .
IMPORT ANT SAFETY INS TRUCTIONS 7 T echnical safety Installatio n, repair , and maintenance work should only be per‐ formed by a Miele-authorized service t echnician. Work by unquali‐ fied persons could be dangerous and may void the warr anty .
IMPORT ANT SAFETY INS TRUCTIONS 8 T o avoid the risk of damage to the dishwasher , make sure that the connection data on the data plate (fuse r ating, voltage, and frequen‐ cy) matches the electrical supply before connecting the dishwasher to the mains.
IMPORT ANT SAFETY INS TRUCTIONS 9 The manu facturer's warr anty will be invalidated if the appliance is not repair ed by a Miele-authorized service t echnician. Defective co mponents should be replaced by Miele original parts only . Only with these parts can the manufacturer guar antee the safe‐ ty of the appliance.
IMPORT ANT SAFETY INS TRUCTIONS 10 Pr oper installation The dishwasher must be install ed and connected in compliance with the installation plan. Be car eful when installing the dishwasher . Wear pr otective gloves to avoid injury on any sharp metal components.
IMPORT ANT SAFETY INS TRUCTIONS 11 Do not sit or lea n on the opened door . This could cause the dish‐ washer to tip and be damaged, and you could get injur ed. Dishes can be very hot at the end of a progr am. Allow them to cool until they are comfortable enough t o handle before unloading.
IMPORT ANT SAFETY INS TRUCTIONS 12 Please obser ve the information given in "T echnical data" r egard‐ ing the capacity of the dishwasher . Accessories Use only ge nuine original Miele parts. If spare parts or accesso‐ ries from other manufactur ers are used, the warr anty may become invalid.
Guide to the dishwasher 13 Appliance overview a Upper spr ay arm (not visible) b Cutlery tray (depending on model) c Upper basket d Middle spray arm e Air intake for drying (depending on model) f Lowe.
Guide to the dishwasher 14 Control panel a (O n/Off ) Button b Pr ogram selection c Pr ogram selection butt on d Short button with indica tor light e Delay Start button with indicat or light f Time display g Check/Refill indicators These operating instructions apply t o several differ ent dishwasher models with differ ent heights.
Caring for the envir onment 15 Disposal of packaging material The cardboar d box and packaging pr o‐ t ect the appliance during shipping. These materials ar e biodegradable and recyclable. Please r ecycle. Disposal of your old appliance Old appliances may contain materials th at can be recycled.
Before using for the first time 16 Opening the door P ull the handle t o open the door . If the door is opened during operation, a ll functions are aut omatically interrupt‐ ed.
Before using for the first time 17 Before using the appliance for the first tim e, you require: – Domestic dishwasher deter gent – Rinse aid formulated for domestic dishwashers Every dishwasher is test ed at the fac‐ t ory . There will be residual wat er in the appliance from this t est.
Before using for the first time 18 Add rinse aid only until it is visible in the opening. The rinse aid reservoir holds appr ox. 3.7 o z. (110 ml). Close the flap firmly so that it clicks int o place. Otherwise water can ent er the rinse aid reservoir during a pr o‐ gram.
Before using for the first time 19 Setting the rinse aid dosage Y ou can adjust the rinse aid dosage for best r esults. The rinse aid dosage is set in stages fr om 0 t o 6.
L oading the dishwasher 20 Tips Remove coarse food residues fr om the dishwar e. There is no need t o rinse items under runni ng water! Do not wash it ems soiled with ash, sand, wax, grease, or paint in the dishwasher . These will damage the dishwasher .
L oading the dishwasher 21 Items not recommended for dish‐ washing – Wooden cutlery, cutting boar ds and dishwar e or it ems with wooden parts – Craft it ems, antiques, valuable vases, and decor ative glasswar e – Plastic items which ar e not heat-re‐ sistan t: the high temper atures in the dishwasher may cause them to melt or lose shape.
L oading the dishwasher 22 Loading e xamples Loading for 10 standar d place settings with cutler y tray Upper basket Lower basket Cutlery tray (depending on model).
L oading the dishwasher 23 Loading for 16 standar d place settings with cutler y tray Upper basket Lower basket Cutlery tray (depending on model).
L oading the dishwasher 24 Loading for 10 standar d place settings with cutler y basket Upper basket Lower basket Cutlery basket.
L oading the dishwasher 25 Loading for 13 standar d place settings with cutler y basket Upper basket Lower basket Cutlery basket.
L oading the dishwasher 26 Upper basket F or safety reasons, do not oper‐ ate the dishwasher without the upper and lower baskets in place (ex cept when running the Tall items progr am, if available). Use the upper bask et for small, light‐ weight and delicate items such as cups, saucers, glasses, dessert bowls, etc.
L oading the dishwasher 27 Adjusting the upper basket In order t o gain more space for taller it ems the upper basket can be adjust ed on three levels with 3/4" (2 cm) be‐ tween each level. The upper basket can also be set at an angle with one side high and the other side low .
L oading the dishwasher 28 Lower bask et F or larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Glasses, cups and small items such as saucers can also be placed in the lower basket. Do not place thin, deli‐ cate glasswar e in the lower basket.
L oading the dishwasher 29 Cutlery Cutlery tray (depending on model) Arr ange the cutlery in the tr ay as shown. T o make unloading much easier , cutler y shou ld be grouped in zones, one for knives, one for forks, one for spoons, etc.
L oading the dishwasher 30 Cutlery basket (depending on model) The cutlery basket can be placed any‐ wher e on the fr ont rows of spikes in the lower basket. T o avoid the risk of injury, knives and forks should be placed with the han‐ dles upwards in the basket.
Operation 31 Detergent O nly use deter gents formulated for domestic dishwashers. Refer to the manufactur er's packaging as t o whether T ab products are suitable for the water har dness level in your area. Please note that the cleaning and dry‐ ing results of T ab detergents can vary greatly .
Operation 32 Adding detergent P r ess the opening catch on the de‐ ter gent dispenser . The flap will spring open. The flap is always open at the end of a pr ogr am.
Operation 33 T urning on T urn on the water supply if it is turned off. Open the door . Mak e sure the spr ay arms are not ob‐ structed. T urn the dishwasher on with the button. The indicator light ne xt to the progr am select ed will come on.
Operation 34 Starting a progr am S tart the progr am by closing the door within four seconds of the last press of a button. The progr am will begin. If you do not close the door within four sec onds, the indicator lights of the selected pr ogram and the time display will flash.
Operation 35 Energy management T o save energy, the dishwasher will switch off aut omatically 10 minutes af‐ ter the last time a button has been pressed or 10 minut es after the end of the progr am (see "Options - Optimize Standby"). P r ess the button to switch the dishwasher back on.
Operation 36 T urning off At the end of a pr ogram: Open the door . The dishwasher can be switched off at any time using the button. T urning the dishwasher off during a pro‐ gr am st ops the progr am. T urning the dishwasher off during the delay star t time will also stop the pr oc‐ ess.
Operation 37 Interrupting a progr am The progr am will be interrupted as soon as you open the door . After four seconds, the indicator light of the selected pr ogram and the time dis‐ play will flash. P r ess the progr am selection button and close the door within four sec‐ onds.
Options 38 Short The Short option reduces the dur a‐ tion of progr ams in which this option is available. In order t o achieve optimum cleaning r esults, consumption r ates ar e in‐ creased with this option. Open the door . T urn the dishwasher on with the button.
Options 39 T urning off the refill indicat or If you consistently use a T ab detergent, you can deactivate the r efill indicator if you wish. Open the door . T urn the dishwasher off with the button, if it is turned on. P r ess the progr am selection button , and, simultaneously switch the dishwasher on using the button.
Options 40 Delay Start Y ou can set the start time for a pro‐ gr am, e.g., t o take advantage of night time electricity rat es. The start time can be delayed between 30 minutes and 24 hours. The delay period is shown in 30 mi‐ nutes incr ements for a delay period be‐ tween 30 minutes and 9 hours 30 mi‐ nutes.
Options 41 Open the door if you need t o check how long the delay period has left to run. The time up until the progr am starts will count down in the display in hours for dur ations above 10 hours, and in mi‐ nutes for dur ations below 10 hours.
Options 42 Buzzer tones A sequence of audible tones will sound at the end of the pr ogr am or if there is a fault. The buzzer at the end of a pr ogram and the warning buzzer in the event of a fault will sound 4 times at intervals with a short pause between each set.
Options 43 Optimize Standby "Optimize Standby" is activat ed by de‐ fault. T o save energy, the dishwasher will switch off aut omatically a few minutes after the last time a button has been pressed or aft er the end of a progr am.
Options 44 F actor y default settings If you have alter ed any settings from the fact ory default, you can reset them back to the factory default settings as follows: Open the door . T urn the dishwasher off with the button, if it is turned on.
Pr ogram overview 45 Pr ogram When to use Pr ogram sequence Pr e- wash Main wash Interim rinse Final rinse Drying Normal Pr ogram for r egular use to complet ely wash a full load of normally soiled dish‐ ware with the ability t o ad‐ just energy and wat er con‐ sumption based on the soil load of the dishware.
Cleaning and care 46 Check and clean your dishwasher regularly . This will help avoid prob‐ lems and faults. All sur faces are susceptible t o scratching.
Cleaning and care 47 Cleaning the door front I f soiling remains longer , it may happen that the surfaces can be‐ come discolored or changed. Remove any soiling immediately . Cle an the front with a solution of warm water and a little dishwashing liquid applied with a soft sponge.
Cleaning and care 48 Filter system The filter system in the base of the wash cabinet pr events food fr om being redeposit ed on dishes. It also protects the circulation pump fr om damage caused by foreign objects. This dishwasher must not be u sed without all the filters in place! Collection of coarse soil may cause the filt ers to clog.
Cleaning and care 49 T o clean the inside of the filter , the flap must be opened: P r ess catches together in the di‐ rection of the arr ows as shown, and open the filter . Rin se all the filters under running wa‐ ter . Then close the flap so that the catch engages.
Cleaning and care 50 Cleaning the spray arms P articles of food can get stuck in the spr ay arm jets and b earings. The spray arms should therefor e be inspected and cleaned regularly (appr ox.
F requently Asked Questions 51 With the help of the following guide, minor faults in the performance of the appli‐ ance, some of which may result fr om incorrect oper ation, can be put right without contacting Miele Service. This will save time and money .
F requently Asked Questions 52 Problem P ossible cause and solution The warning buzzer is sounding. A ll the program indica‐ tor lights flash when the door is opened. F ault code appears in the time display . There may be a t echnical fault.
F requently Asked Questions 53 W ater intake fault Problem P ossible cause and solution The dishwasher stop‐ ped working shortly af‐ ter the progr am started. The warning buzzer is sounding. The Intake/Drain indica‐ tor light is flashing on and off.
F requently Asked Questions 54 W ater drainage fault Problem P ossible cause and solution The dishwasher stops durin g a program. The warning buzzer is sounding. The Intake/Drain indica‐ tor light flashes. F ault code appears in the time display .
F requently Asked Questions 55 General pr oblems Problem P ossible cause and solution The warning buzzer is sounding. The indicator light of the selected program and the time display flash. The dishwasher does not start or the delay start time stops run‐ ning.
F requently Asked Questions 56 Noises Problem P ossible cause and solution There is a knocking noise in the wash cabi‐ net. A spray arm is hitting the dishwar e. Int errupt the pr ogram, and r earrange the items which are obstructing the spr ay arm.
F requently Asked Questions 57 P oor cleaning results Problem P ossible cause and solution The dishes are not clean. The dishes were not loaded corr ectly . See notes in "L oading the dishwasher". The progr am was not powerful enough. Select a mor e int ensive progr am (see "Progr am overview").
F requently Asked Questions 58 Problem P ossible cause and solution Dishware is not dry or cutler y and glasses are spotty . The rinse aid dosage is set too low or the rinse aid r eservoir is empty . Replenish the reservoir , increase the dosage, or change the brand of rinse aid (see "Befor e using for the first time - Rinse aid").
F requently Asked Questions 59 Problem P ossible cause and solution There are rust stains on the cutler y . The affected items ar e not corrosion resistant.
F requently asked questions 60 Cleaning the drain pump and non -return valve If the water has not been pumped away at the end of a p rogr am, the drain pump or the non-return valve might be blocked. They are, however , easy to clean. T urn off the dishwasher and pull the plug.
Customer service 61 Repairs F or problems that you cannot resolve on your own, please contact: – your Miele dealer or – Miele Service The telephone number for Miele is li sted at the back of these instruc‐ tions.
Optional accessories 62 Dishwasher deter gent and rinse aid, as well as clea ning and care pr oducts, are available as optional accessories. All the products ar e designed for use with Miele dishwashers. These and many other useful products can be or der ed via the Miele website or from Miele (see end of this manual for contact details).
Optional accessories 63 Dishwasher care products Miele cleaning and care pr oducts pro‐ vide optimum car e for your dishwasher . Dishwasher cleaner – Cleans the dishwasher effectively and thor oug.
64.
65 Installation Instructions Please refer t o the Installation Diagram supplied with these instructions. T o comply with IEC sound testing pr otocols, please contact Miele for additional instructions.
Electrical connection 66 Installation, repairs and other work by unqualified persons could be dange rous. Check that the voltage, frequency and fuse r ating shown on the data plate match the household mains supply . The power outlet must be accessible aft er installation.
Electrical connection 67 Hardwired electrical connection It is p ossible to har dwire this appliance to an e xisting power cable. CA UTION: Before servicing, discon‐ nec t the power supply by either re‐ moving the fuse, shutting off the power main or manually "tripping" the circuit br eaker .
W ater connection 68 W ater intake W at er in the dishwasher must not be used as drinking water . – The dishwasher may be connected to a col d or hot water supply up to a maximum of 140°F/60°C. We would only r ecommend connec‐ tion to a hot water supply if it is eco‐ nomical, e.
W ater connection 69 Drainage – The machine comes equipped with a built- in non-return valve on the dis‐ charge side t o prevent waste wat er from flowing back int o the dishwash‐ er .
Sound emission testing 70 Pr erequisites for sound emission tests Load the dishwasher with 16 sta ndar d place settings and use the Normal pr o‐ gram. Setup for sound emission tests The dishwasher must be set up according t o the following specifications.
Sound emission testing 71 Push the pr ovided fleece strips (depending on model) under the toe-kick until it is flush with the appliance feet . P ush the t oe-kick into place in such a way that it is flush with the door front .
Sound emission testing 72 Remo ve the prot ective film from the provided insulating strip (depending on model) . P ush the insulating strip int o the front top edge of the t oe-kick .
.
.
9 Independence Way Princeton, NJ 08540 Phone: Fax: www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial number of your appliance available before contacting Technical Service.
M.-Nr . 10 014 080 / 02 en-US G 4970 / G 4975 .
Een belangrijk punt na aankoop van elk apparaat Miele 10014080 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele 10014080 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele 10014080 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele 10014080 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele 10014080 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele 10014080 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele 10014080 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele 10014080 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
