Gebruiksaanwijzing /service van het product FN 12540 S van de fabrikant Miele
Ga naar pagina of 40
Operating and installation instructions F rost-free freez ers FN 4693 S T o avoid the risk of accidents or damage to the appliance, it is essential to read these operating instructions before it is installed or used for the first time.
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Miele { home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Optional accessory .
Ice cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cooling drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Freezer tray .
a Safety lock indicator light b On/Off button c T emperatur e display d Controls for setting the temperatur e Left hand button: warmer Right hand button: colder e Super freeze button and indicator lig.
a Lighting b Frost fr ee system c Freezer tray d Freezer drawers with freezer calendar e Marker system for frozen food Description of the appliance 5.
Optional accessory The Miele | home system gives you the ability to check information about your appliance at any time. For example, if a temperature alarm, power cut or other fault message occurs, this information will be relayed directly to the Miele | home system.
Disposal of the packing material The transport and protective packing has been selected from materials which are envir onmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
This appliance complies with all relevant legal safety r equirements. Improper use can, however , present a risk of both personal injury and material damage. T o avoid the risk of accidents and damage to the appliance, read these instructions carefully befor e installation and before using for the first time.
Before connecting the appliance to the mains supply , make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply . This data must correspond in or der to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt.
Use Never handle frozen food with wet hands. Y our hands may freeze to the frozen food. Danger of fr ost burn. Do not take ice cubes out with your bare hands and never place ice cubes or ice lollies in your mouth straight from the fr eezer . The very low temperature of the frozen ice or lollies can cause frost burn to the lips and tongue.
The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.
Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven.
Normal energy consumption Increased energy consumption Defrosting Defrost the freezer when a layer of ice one centimetre thick has built up. A layer of ice hinders the cold from reaching the frozen food, and causes an increase in energy consumption.
Before using f or the first time ^ Clean the inside of the appliance and the accessories with warm water and a little washing up liquid, and then dry with a soft cloth. Important: T o ensure the correct functioning of the appliance, let it stand for between ½ and 1 hour after transporting it to its final location before connecting it to the mains.
^ Press the On/Of f button to come out of the setting mode. The electronics will then switch over to normal operation after a couple of minutes. Switching off f or longer periods of time If the appliance is not going to be used for a longer period of time, e.
It is very impor tant to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the corr ect temperature to deteriorate rapidly . T emperature influences the growth rate of these micro-organisms.
If you have adjusted the temperature, wait for appr o x. 6 hours if the appliance is not very full and for appro x. 24 hour s if the appliance is full before checking the temperatur e display as it will take this long for the display to show the accurate temperature of the appliance.
^ Press one of the temperatur e selector buttons repeatedly until an ^ appears in the display . ^ Press the Super fr eeze button again. ^ lights up in the temperature display . ^ Y ou can now adjust the level of brightness by pressing the temperature selector buttons.
Y our appliance has been fitted with a warning system which ensures that the temperature in the fr eezer cannot rise unnoticed and to avoid energy being wasted if the door is left open. T emperature alarm An alarm will sound and the temperature display will flash if the temperature in the fr eezer gets too warm.
Freezing fresh food Fresh food should be fr ozen as quickly as possible. This way the nutritional value of the food, its vitamin content, appearance and taste are not impair ed. Food which takes a long time to freeze will lose more water fr om its cells which then shrink.
Maximum freezing capacity T o ensure that fresh food placed in the freezer fr eezes through to the cor e as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate “Freezing capacity .
Storing frozen f ood When buying frozen food to stor e in your freezer , check – that the packaging is not damaged, – the use by date, – the temperature at which the fr ozen food is being stored in the shop. The length of time it can be kept is reduced if it has been stor ed at a temperature warmer than -18 °C.
– Do not season fresh foods or blanched vegetables before freezing. Only season cooked food lightly before fr eezing but care should be taken as the taste of some spices alters when frozen. – Do not place hot foods or drinks in the freezer . This causes already frozen food to thaw , and increases the energy consumption considerably .
When freezing, make sur e that food already fr ozen does not come into contact with fresh food being fr ozen as this could cause the frozen food to begin to defrost. Freezer calendar The freezer calendar on the fr eezer drawer gives the length of time which various foods can be stored for effectively .
Ice cubes (with or without release button depending on model) ^ Press down the r elease button on the ice cube tray and fill the tray with wa - ter . Any excess will flow out through the outlet. ^ Now pull the release button up to seal the ice cube tray .
Cool pack The cool pack prevents the temperature in the fr eezer rising too quickly in the event of a power cut. Place the cool pack in the upper drawer directly on top of food or to save space on the freezer tray . The cool pack will be at its most effective after it has been in the freezer for appr ox.
This freezer is equipped with a Fr ost free system. The fr eezer defrosts automatically . The moisture generated by defr osting collects in the condensor and is automatically dissipated by the condensor from time to time.
Never use cleaning agents containing abrasive substances such as sand, soda, acids or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear . Make sure that water cannot get into the electronic unit or into the ventilation gaps.
V entilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner . A build-up of dust will increase the energy consumption of the appliance. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time.
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
. . . the alarm sounds and the temperature display flashes. ^ Has the appliance door been open for longer than 60 seconds? The freezer temperatur e has risen above the temperature set because ^ the door has been opened too frequently , or large amounts of fresh food have been put in at once for freezing.
. . . the interior light is not working. ^ W as the door left open for too long? The lighting switches itself off automatically after approx. 15 minutes.
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes.
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – Y our Miele Dealer or – The Miele Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance.
Electrical connection U .K. All electrical work should be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. The appliance is supplied with a mains cable and moulded plug ready for connection to an a.
Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance ’ s energy consumption. Location This appliance should be installed in a dry , well ventilated room.
The appliance is supplied right-hand hinged. If left-hand door hinging is requir ed, follow the instructions below . Removing the door handle: First the side section of the handle must be removed: ^ Pull door handle a towards you. Side section b slides back, creating a gap d between side section b and mounting plate c .
^ Open the door , tilt it downwards and take it off. T ake care not to lose washer a . ^ Using a screwdriver r emove covers b . ^ Unscrew upper hinge pin c using the spanner supplied, and refit on the opposite side. ^ Put covers b back on again from behind and then push them firmly into place from the fr ont.
Refitting the handle: Please make sure you follow the instructions below carefully when you refit the handle. The door seal will be damaged if the handle is fitted incorrectly . ^ Loosely attach the handle to the opposite side of the door with the two front scr ews b .
Alteration rights reserved / 3105 FN 4693 S M.-Nr . 06 498 980 / 02 e n-G B.
Een belangrijk punt na aankoop van elk apparaat Miele FN 12540 S (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele FN 12540 S heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele FN 12540 S vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele FN 12540 S leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele FN 12540 S krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele FN 12540 S bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele FN 12540 S kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele FN 12540 S . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
