Gebruiksaanwijzing /service van het product JV5-320DS van de fabrikant Mimaki
Ga naar pagina of 140
COL OR INKJET PRINTER OPERA TION MANU AL MIMAKI ENGINEERING CO., L TD. TKB Gotenyama Building, 5-9 -41, Kitashinag awa, Shinagawa-ku, T oky o 141-0001, Japan Phone : +81-3-5420-8671 Fax : +81-3-5420-8687 URL : http://www .
Foreword Congratulations on you r purchase of MIMAKI color ink jet printer “JV5-320DS” . The JV5-320DS is a color ink-jet printer for high qu ality printing realizing prin ting on fabric media (for soft sign) with sublimation transfer ink (4-color and 6-color), base d on the color ink-jet printer JV5- 320S.
3 T ABLE OF CONTENTS CHAPTER 1 Safety Precautions Types of media that can be us ed ................ ............................ .............. ........ 1-2 Basic specifications ....... .................................................................
4 CHAPTER 4 Daily Care Routine Maintenance ..... ............................ .......................................... .......... 4 -2 Notes on cleaning solution ......... ................. ................................. ............ 4-2 Cleaning of platen sheet meta l/platen sheet metal holde r .
5 Invoking NCU functions .......... ................ ............................................. ........ 6 -25 List of functions ................. ............................................................. ........ 6-25 Setting a NCU functions .
6.
Types of media that can be used ..... ............................ .......... 1-2 Basic specifications ....... ................................. .............. .......... 1-3 Specifications for ink ..... ...............................................
1 Safety Precautions 1-2 T ypes of media that can be used Y ou can use only the roll media with this machine. The types and sizes of media that can be used with the printer are explained below . T ypes of media that can be used T ransfer paper Fabric (for soft sign graphics) Sizes of media that can be used Leaf media cannot be used.
1-3 Basic specifications Basic specifications Item Specificati on Print head Method Drop-on-demand piezo electric print heads Specification 4-heads Staggerds Drawing mode (scan x feed) 720 x 540dpi 540or720 x 720dpi 540 x 900dpi 540or720 x 1080dpi 720 x 1440dp i 1440 x 1440dpi Usable inks Sublimation transfer ink :4 colors (Y .
1 Safety Precautions 1-4 Recomended Environm ent A vaila ble tem p. 20 °C to 35 °C Humidity 35 to 65 % Rh (No condensation) Guaran teed tem p. 2 0 °C to 25 °C T emperature change ± 10 °C / h or less Dust Equivalent to normal of fice level W eight Main unit 1200 kg Outside dimensions W idth 5170 mm Depth 1610 mm Height 1640 mm *1.
1-5 Specifications for ink S pecifications for ink Item Supply Dedicated sublimatio n transfer ink cartridge Color Black ink cartridge Blue ink cartridge Magenta ink cartridge Y ellow ink cartridge Li.
1 Safety Precautions 1-6.
Configurations and Functions .......... ............................ .......... 2-2 Front side of machine (left side) .............................. .................... 2-2 Rear ................................................... ....................
2 Before Use 2-2 Configurations and Functions This chapter explains name of each part and the operation panel of this machine. Front side of machine (lef t side) Here, only different in point from the JV5-320S are explained. For other names and functions, refer to the JV5-320S Operatio n Manual.
2-3 Configurations and Functions Rear Counter weight attaching arm Attach the wei ght to adjust the weight of the take-up/feeding ten- sion bar . Media setting position NG label This is the guide for setting the media.
2 Before Use 2-4 Relationship s between ink st ation and head row The carriage mounts four heads e ach with eight rows of nozzle s. One color ink is applied to each row of nozzles. Remember these relationships when checking the head s for clogged nozzles, repla cing ink cartridge and replenishing inks.
2-5 Operation Panel Operation Panel The operation panel of t his machine fu nctions in the same way as that of the JV5-320S with exception of the following points. As this machine is not equipped with the print heater , lamps related to the print heater does not light.
2 Before Use 2-6 Operation to set function menus T o set a function menu, press the [FUNCTION] key in LOCAL mode and press [ ], [ ], [ ] or [ ] or [ENTER] key as appropriate. If the printer is no t in LOCAL mode, press the [REMOTE] key once.
2-7 Operation to set function menus 4 Press the [ ] or [ ] key to set ON/OFF of automatic cleaning. 5 Press the [FUNCTION] key again if the setting of [CLEANING INTERV AL] and [CLEAN- ING TYPE] is needed. This setting is permi tted only when automatic cleaning [ON] is selected.
2 Before Use 2-8 Outline of menu hierarchy Function menu Press the [FUNCTION] key to invoke the function menu..
2-9 Operation to set function menus POST.
2 Before Use 2-10 Direct keys Pressing direct keys will easily invoke frequently used functions..
2-11 Operation to set function menus Setting values in function menus The menus conta in the following functions. SET UP functions Function name Sub function Setting value Function MEDIA FEED (Refer to P .6-5 in this manual.) COMPENSA TION -255 to 255 Draws a pattern to compensate the feeding amount of the media and compensates.
2 Before Use 2-12 Print. MAINTE. (Refer to P .6-10 in this manual.) CLEANING Press [FUNC- TION] key to set items on the right. CLEANING INTER V AL 0.1 to 100.0 mm Clean s the print heads automatically every completion of printing. CLEANING TYPE SOFT , NORMAL, HA RD WIPING Press [FUNC- TION] key to set items on the right.
2-13 Operation to set function menus MAINTENANCE functions For functions that are not exp lained in det ail in this manual, related items are indicated in gray . Function name Sub function Setting value Function ST .MAINTE- NANCE Refer to the Chapter 4 of the JV 5-320S Operation Manual.
2 Before Use 2-14 HD.MAINTE- NANCE FILL UP INK Refer to the Chapter 3 of the JV5-320S Operation Manual. The heads are charged with ink. Use this function if nozzles are not unclogged by [CLEANING] and [NOZZLE W ASH].
2-15 Operation to set function menus SLEEP SET UP Refer to the Chapter 4 of the JV 5-320S Operation Manual. REFRESH REFRESHinter- val OFF , 1 to 168 h While the power switch is of f, the printer performs refreshing opera- tion at fixed intervals to prevent ink clogging or the like.
2 Before Use 2-16 MACHINE SET functions Function name Sub function Setting value Function REAR MIST F AN (Refer to P .6-17 in this manual.) STOP TIMER CONTINUE, 0 ~ 240mm Sets th e operation of the mist fan in the rear of the machine. [STOP TIMER] sets the time until the fan stops af ter drawing is com- pleted.
2-17 Operation to set function menus INFORMA TION ERROR HISTOR Y (Refer to P .6-21 in this manual.) (Can be selected directly by pressing [INFORMA TION] key .) Displays the history of the errors the printer has developed up to now . T wo or more errors, if any , can be displayed in turn by pressing the [ ] or [ ] key .
2 Before Use 2-18 NCU functions NCU functions are display ed only when the machine is equipped wit h the optional nozzle check unit (OPT -J0218). Function name Sub function Setting value Function NOZZLE CHECK (Refer to P .6-26 in this manual.) O N, OFF Set whether or not to p erform nozzle missing detection.
Adjusting the head gap ... ............................................. .......... 3-2 Setting the media on the pr inter ........... ............... ........... ........ 3-3 Attaching/removing platen sh eet metal .....................................
3 Printing 3-2 Adjusting the head gap Set the head gap (hei ght from the medi a to the nozzle plane of the heads). When the carriage is to move above the platen for printing or maintenan ce, it moves while keeping the head gap at the preset value. The upper limit of the head gap varies with media thickness.
3-3 Setting the media on the printer Setting the media on the printer This printer can be used with roll media and cut sheet media. Use the media recommended by MIMAKI. (Refer to “Sizes of media that can be used (P .1-2)” ) Leaf media canno t be us ed with this machine.
3 Printing 3-4 Att aching/removing platen sheet m et al When using transfer paper for the me dia, attach the platen sheet metal. When using fabric media, remove the platen sheet metal. Att ach the platen sheet met al When using sublimation transfer pape r , attach the platen sheet metal.
3-5 Setting the media on the printer 3 Check that the height of the platen sheet met al is same as that of the platen sheet met al holder . If the platen sheet metal is higher , the reasons may be: • The platen sheet metal is placed on the screw of the platen sheet metal holder .
3 Printing 3-6 Setting position for fabric media When setting fabric media (platen sh eet metal is not used), be careful about the setting position for the media.
3-7 Setting the media on the printer Setting media When setting media, use the heavy media feeding/take-up machine. Set the media by follo wing procedures below: When setting media, be su re to set the media press on the proper positio n. The media press of this mach ine also functions as the detect ion plate to detect the media wid th.
3 Printing 3-8 [4] Adjust the media (Supplement ation/ notes) Procedures for fixing media on heavy media take-up machine When fixing me dia on the pape r core, use adhesive t ape etc. and p ay attention to the next points to avoid folds: • Make intervals of adhesive t ape within 500mm.
3-9 Setting the media on the printer Notes when feeding fabric media If the set fabric media is fed in the status without te nsion on both in front and in the rear , the media may entwine the feeding roller . When feeding fabric media, perform the work putting tension on the fabr ic media by holding with your hand.
3 Printing 3-10 If the media cannot be detected autom atically In some cases, the media cannot be de tected automa tically depending on th e set media. In this case, detect the media by following proced ures below: STEPS: 1 Set the “MEDIA DETECT” in the setting function to “MANUAL”.
3-11 Setting the media on the printer 5 Press the [ ] [ ] keys to move the carriage to the right edge of the media and pre ss the [ENTER] key . Align the drawing origin arrow of the head cover with the rig ht edge of the media. Press the [ENTER] key to determin e the right edge of the media.
3 Printing 3-12 [5]Adjusting the counter weight T o keep the proper tension of the media and to take up stably , attach the counter weight to the take-up ten- sion bar and the feeding tension bar after setting media. Please note that the counter weight attached may slack off the media on the in k rece iver and soil the me dia.
3-13 Setting the media on the printer [6]Set the media press This machine has two types of media press depending on the med ia type. For fabric media 1 Prepare the me dia press for fabric media. 2 Paste the media press on both edges of the media. Make arrow marks on the media press matches the edge surface of the media.
3 Printing 3-14 For transfer p aper 1 Prepare the me dia press for transfer p aper . 2 Paste the media press on both edges of the media. Make arrow marks of the media press match the edge surface of the media.
3-15 Setting the media on the printer Setting the media using the roll holder Set roll media as following workflow . Roll holder is ancillary . It is not suitable for continuo us drawing on long media/ for long hours or for wide wid th/heavy media.
3 Printing 3-16 When [MEDIA RESIDUAL] of [MAINTEN ANCE] function has been set to ON STEPS: 1 Detection is completed, and the carriage returns to the station . 2 Input a value of the media length using the [ ] or [ ] key an d press the [ENTER] key .
3-17 Setting the media on the printer Notes on media edge su rface and pinch roller If you press the media edge surface with the pinch ro ller when you moved down th e clamp lever , the media may not be fed prop erly .
3 Printing 3-18 Effective Plotting Area The printer has an area where printing is not permitted, for mechanical reasons. This area is called “non-printing area”. Margin This function adjusts the right and left mar gins of the media. Use this function when mar gines other than 25 mm , which is the standard mar gin, are required.
3-19 Establishing the Origin Est ablishing the Origin Establish the origin for pr inting the data on the medi a loaded on the printer . When printing requires an area other th an that defined by the estab lished orig in, set the origin at another point by following the origin setting procedure again.
3 Printing 3-20 Other notes Handling of media af ter drawing The drawn media will be taken up with the take-up machi n e located in the rear of the machine. If the media taken up will be left on the floor etc. for long hours as it is in roll status, it may set of f due to the media’ s own weigh t.
3-21 Other notes When cutting media After drawing, if you wish to cu t the media with scissors etc., be careful about the following point: If you cut the media with sc issors etc., the media may drop into the ink tray and be blot- ted. When cutting me dia, follow the procedures below: 1.
3 Printing 3-22 Use method of rear surface dryness fan When drawing on the fabric media, in k broke through to the rear side of the media may impact on the dr awing surface after take-up because ink does not get dry . In th is case, use the rear surface dryness fan to dehydrate ink on the rear surface.
Routine Maintenance ...... ............................................. .......... 4-2 Notes on cleaning solution ................. ......................................... 4-2 Cleaning of platen sheet metal/ platen sheet metal holder .......... 4-2 Cleaning the media sensor (2 places) .
4 Daily Maintenance 4-2 Routine Maintenance Notes on cleaning solution Use the cleaning liquid dedicated fo r the ink being used. Cleaning of platen sheet me t al/platen sheet met al holder W ipe dust on the platen sheet metal with soft brush, dry cloth or paper towel.
4-3 Setting periodical operations in stand-by m ode [ROUTINE SETUP] Setting periodical operations in st and-by mode [ROUTINE SETUP] While the printer is waiting for the ne xt printing job, it can perform variou s operations at fixed intervals to prevent ink clogging or the like.
4 Daily Maintenance 4-4 Other maintenance functions Changing the time for issuing warning of flushing Box filter replacement. [FIL TER EXC. L V .] The filter on the flushing BOX could be stained, de pending on the use environm ent and working conditions, earlier than the standard time for re placement.
4-5 Other maintenance functions 3 With [ ] key , select [FIL TER EXC. L V .], and press [ENTER] key . 4 With [ ] or [ ] keys, enter the BOX replacement level. Fix with [ENTER] key . 5 Press [END] key several times. It returns to the local mode.
4 Daily Maintenance 4-6 Cleaning the flushing tray Each time when the power is put on , the following messages are indicated . Pe rform the cleaning of the ink tray . STEPS: 1 Press [ ] key . The carriage moves and goes off the station. 2 Open the maintenance cover and remove the F- BOX filter and F-BOX filter base.
4-7 Cleaning the flushing tray 5 Close the maintenance cover , and press the [ENTER] key . 6 The operation will return to the local mode. Clean the in k on the flushing tray every day . When it is continuously used with out cleaning, there could arise material failure to the machine from functional decline du e to the sta ins.
4 Daily Maintenance 4-8 Replacing F-Box filte rs When the following warning message is indicated, quickly replace the filters on the suction fan box. If yo u continue to use for some time a fter t.
4-9 Replacing F-Box filters 3 With [ ] key , select [FIL TER EXCHANGE], and press [ENTER] key . The carriage moves off the station. 4 Open the maintenance cover and remove the F-BOX filter from F-BOX filter base. 5 Attach new F-BOX fi lter to F-BOX filter base.
4 Daily Maintenance 4-10 Replace the filter of exhaust fan in the rear T o maintain the drawing quality , replace the f ilter of exhaust fan in the rear periodically . (SPC-0629/ exhaust fan filter set [sold separately]) It is recommended to re place the filter per 1000m 2 drawing.
4-11 Replace the filter of the slider fa n. Replace the filter of the slider fan. Replace the filter periodically to maintain the performance of the slider fan. (SPC-0630/head fan filter set [sold separately]) It is recommended to re place the filter per 1000m 2 drawing.
4 Daily Maintenance 4-12 6 Fasten the knurled screws fixing the filter . 7 Close the front cover , and press the [ENTER] key . After performing the initial operation, the printer returns to LOCAL mode. Be careful about th e attac hing direction of the filter plate.
4-13 Cleaning of ink tray/ink tray sheet metal Cleaning of ink tray/ink tray sheet met al Clean the ink tray and the ink tray sheet metal when replacing media. STEPS: 1 Wipe the ink tray and the ink tray sheet met al to the direction indic ated with an arrow .
4 Daily Maintenance 4-14 If ink is hardened and it cannot be wiped off with p a per towel STEPS: 1 Wear latex gloves and goggles. 2 Close the ink discharging cock of the ink tray (two positions for right and left) . 3 Connect the hose with the polyethylene resin t ank for dra in.
Warning errors newly added .......................................... ........ 5-2 Error messages newly added .............. ............... ................... 5-2 This chapter describes the act ions to be taken when the printer develops any trouble.
5 In Case of T rouble 5-2 W a rning errors newly added Here, warning messages that are newly disp layed in the JV5-320DS are explained. For other warning messages, refer to the JV5-320S Operat ion Manual. Error messages newly added Here, error messages that are newly displayed in the JV5-320DS are explained.
Functions Invoked by [FUNCTION] Key ........... ................................. ........... 6-2 Invoking SET UP functions ................... 6-3 Registering printing conditions in a lump (type registration) ..................................... 6-3 List of functions .
6 Operation for Functions 6-2 Functions Invoked by [FUNCTION] Key The following five types of functio ns can be invoked by pre ssing the [FUNCTION] key . Function name Description Page in this manual SET UP Make various settings concerning print quality .
6-3 Invoking SET UP functions Invoking SET UP functions Registering printing conditions in a lump (type registration) FUNCTION mode provides 16 setup functions. The setting value of each of the 15 functions other than SETUP RESET can be registered as any of the fol- lowing four types.
6 Operation for Functions 6-4 Settings of the setup functions The operation described below on the operation pane l is required to execu te the setup functions. STEPS: 1 Make sure that the printer is in LOCAL mode, and then select [SET UP] using the [FUNCTION] key and press the [ENTER] key .
6-5 Invoking SET UP functions Outline of the setup functions MEDIA FEED Set particulars related to media feed. The table below show s the setting items. COMPENSA TION Compensates the feeding amount of the media when you replaced the media ty pe or when you changed the heater temperature without fail.
6 Operation for Functions 6-6 FINE quality Set a desired print quality in FINE mode (7 20 dpi resolution i n the Y -axis direction). A vailable setting values: [STD.
6-7 Invoking SET UP functions LOGICAL SEEK Set LOGICALseek ON / OFF . A vailable setting values: [ON, OFF] Movement of heads when LOG ICALseek is OFF Movement of heads wh en LOGICALseek is ON INK LA YERS Set the number of layers in which ink is applied.
6 Operation for Functions 6-8 PRE-FEED Set whether or not to feed the m edia back and forth before printing to prevent the media from sticking to the platen. A vailable setting values: [ON, OFF] The setting values for each user type are stored separately from those for other user types.
6-9 Invoking SET UP functions COLOR P A TTERN Sets whether you draw the nozzle missing check pattern on both edges of the media respec tively . A vailable setting values fo r right edge: [ON, OFF] When the pattern is to be printed, the printing location of image data is shifted by 18 mm from the origin in the scanning direction.
6 Operation for Functions 6-10 PRIORITY Concerning the following setup func tions, select whether priority is gi ven to the settings made on the printer or to the designation from the host. [MEDIA COMP .] , [HEA TER] , [PRINT MODE] , [INK LA YERS] , [DR YING TIME] , [PRE-FEED] , [MARGIN] , [COLOR P A TTERN] , [REFRESH] , [FD.
6-11 Invoking SET UP functions HEAD GAP (See P .3-2) Set the head gap (height from the media to the nozzle plan e of the heads). A vailable setting values: [1.5 mm ~ 5.0 mm] (In steps of 0.1 mm / Default: 1.5 mm) The upper limit of the head gap varies with media thickness.
6 Operation for Functions 6-12 Invoking MAINTENANCE functions The maintenance functions described here are to be executed to keep the printer in good condition. T o carry out maintenance of the printer , select [M AINTENANCE] from the FUNCTION menu and make the necessary settings.
6-13 Invoking MAINTENANCE functions Setting a maintenance function T ake the following step s on the operation panel to execu te a maintenance function. STEPS: 1 Make sure that the printer is in LOCAL mode, and then select [MAINTENANCE] using the [FUNCTION] key and press the [ENTER] key .
6 Operation for Functions 6-14 Make setting of the media rema ining amount display function [MEDIA RESIDUAL] Set ON/OFF of the media remaining amo unt display function. (Normally OFF ) W ith the media remaining amount disp lay function set to ON, the media remaining amou nt is displayed in REMOTE mode.
6-15 Invoking MAINTENANCE functions Moving the printer safe ly [BeforeMovingIt.] Use this function to lock the statio n when the printer is to be moved. Use this function when the printer is to be moved in such a way th at some vibration is expected. However , when the printer is to be moved, be sure to contact your dealer or an of fice of MIMAKI.
6 Operation for Functions 6-16 Invoking MACHINE SETUP functions List of functions This section describes briefl y the machine setup functions and their setting values. Functions of [INFORMA TION] key This section describes briefly the [INFORMA TION] functions and their setting values.
6-17 Invoking MACHINE SETUP functions Setting a MACHINE SETUP The operation described below on the operation panel is required to execute machine setup functions. STEPS: 1 Make sure that the printer is in LOCAL mode, and then select [MACHINE SET UP] using the [FUNCTION] key and press the [ENTER] key .
6 Operation for Functions 6-18 DR YNESS FEED Set whether or not to perform feeding for media drying. A vailable setting values: [ON, OFF] W ith DR YNESS FEED set to ON, the printer feeds the media up to the location of the post-heater where the media is dried.
6-19 Invoking MACHINE SETUP functions UNIT SETUP Set the units of measure to be used with the printer . T emperature Set the unit of temperature. A vailable setting values: [°C ( Centigrade) , °F ( Fahrenheit) ] Length Select the unit system for th e units of length and area.
6 Operation for Functions 6-20 CART . PRIORITY Y ou can select the cartridge status to use first w ith the double cartridge function of ink supply . A vailable setting values : [INK LEVEL, EXP . DA T A] (Default: INK LEVEL) When INK LEVEL is selec ted First use the cartridge of less remaining amount of ink.
6-21 Invoking MACHINE SETUP functions ERROR HIST OR Y History of errors and warnings that have occurred up to now are displayed. (ONL Y ERROR, ONL Y W ARNING , ALL) Using the [ ] or [ ] key , the errors and warnings can be displayed one by on e in the order of occurrence.
6 Operation for Functions 6-22 Settings of the setup functions (grouped for eac h user type) Settings of the maintenance functions.
6-23 Invoking MACHINE SETUP functions Settings of the machine setup functions Settings of NCU Settings of DISPLA Y Settings of REPLACE COUNTER Date and time Drawn only when the m achine is equipped with the optional nozzle check unit (OPT -J0218).
6 Operation for Functions 6-24 VERSION Displays version inform ation of the equipment. Serial&DealerNo Displays the serial No. and dealer No. of the printer . Item Display Remarks Model JV5-320DS Main F / W V ersion ∗ . ∗∗ NCU F / W V ersion ∗ .
6-25 Invoking NCU functions Invoking NCU functions This function is available only wh en the machine is equipped with the optional nozzle check unit (OP T - J0218). List of functions This section describes briefly the NC U functions and th eir setting values.
6 Operation for Functions 6-26 Outline of the NCU functions The NCU functions consist of op erations con cerning the nozzle miss ing detection function. Setting Make settings of the function that monitors nozzle missin g with the nozzle check unit. Nozzle check Set whether or not to perform nozzle missing detection.
6-27 Invoking NCU functions NG ACTION [AFTERtheDRA Wend] (*1) Set the operation of the printer after completion of pr inting of one file in case a preset number of missing nozzles or more are detected and thus NG judgment is made.
6 Operation for Functions 6-28 DISPLA Y setting Set a language to be used with the printer . Language Japanese English German French Spanish Italian Portuguese The setting is reflected on th e indications on t he LCDs.
6-29 Applied settings of functions Applied settings of functions Initial settings can be changed, as required. Settings of heaters Setting items for heaters The items that can be set for the three heaters are as de scribed below . SET TEMP . Set temperature for each of the two heaters.
6 Operation for Functions 6-30 Det ailed settings of heaters Make settings of the pre-heater and post-heater built in the platen. The temperatures of heaters can be adjusted even during printing so that optimum temperatures can be obtained.
6-31 Applied settings of functions Setting the temperatures and st andby time of heaters Set the temperatures and standby time of heaters by the following procedure: STEPS: 1 Make sure that the printer is in LOCAL mode. If it is in REMO TE mode, press the [REMOTE] key once.
6 Operation for Functions 6-32 How to operate function menus The following pages show the operating procedures a nd the messages displayed on the LCDs, using the fol- lowing icons. For detailed information of operatio n procedures, refe r to the relevant pages.
6-33 Functions related to print quality Functions related to print quality W ith function menus of the printer , th e print quality can be checked and se tting can be changed to improve the print quality . Correcting media feed during printing [FEED COMPENSA TION.
6 Operation for Functions 6-34 Functions related to ink When ink set s (4-color , 6-co lor) are to be changed MAINTENANCE <ENT> ST.MAINTENANCE <ent> HD.MAINTENANCE <ENT> FILL UP INK <ent> DISCHARGE&WASH <ent> Remove the i nk car- tridges.
6-35 Functions related to ink When ink set s (4-color and 6-colo r) are to be changed (continued) Set all Sb52 INK cartridg es. Sb52-4Color MMCC YYKK KKYY CCMM FILLING UP NOW. PLEASE WAIT Sb52-4Color ∗ ∗ ∗ ∗ ∗ ----------- -------------- ----- Choose an ink ty pe.
6 Operation for Functions 6-36 Function Flowchart [BOOT] JV5-320DS.
6-37 Function Flowchart [BOOT].
6 Operation for Functions 6-38 Function Flowchart [LOCAL mode].
6-39 Function Flowchart [LOCAL mode] (S).
6 Operation for Functions 6-40.
6-41 Function Flowchart [LOCAL mode].
6 Operation for Functions 6-42 Function Flowchart [REMOTE mode].
6-43 Function Flowchart [REMOTE mode].
6 Operation for Functions 6-44 Function Flowchart [FUNCTION Key].
6-45 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-46.
6-47 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-48.
6-49 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-50.
6-51 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-52.
6-53 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-54.
6-55 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-56.
6-57 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-58.
6-59 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-60.
6-61 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-62.
6-63 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-64.
6-65 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-66.
6-67 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-68.
6-69 Function Flowchart [FUNCTION Ke y].
6 Operation for Functions 6-70 D202100-10-27112009.
.
Printed in Jap an © MIMAKI ENGINEERING CO., L TD. FW:6.0 NH.
Een belangrijk punt na aankoop van elk apparaat Mimaki JV5-320DS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mimaki JV5-320DS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mimaki JV5-320DS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mimaki JV5-320DS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mimaki JV5-320DS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mimaki JV5-320DS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mimaki JV5-320DS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mimaki JV5-320DS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
