Gebruiksaanwijzing /service van het product 5010 van de fabrikant Mitel
Ga naar pagina of 32
USER GUIDE IP Phone 5010 MITEL NETW ORKS.
3 3 00 I C P - 7 . 0.
-i- Contents ABOUT YOUR PHONE 1 For Users on Resilie nt 3300 ICP Systems 2 TIPS FOR YOUR COMFORT AND SAFETY 2 Don't cradle the handset! 2 Protect your hearing 2 Angle the phone fo r easier viewin.
-ii- CALL HANDLING 9 Hold 9 Transfer 9 Conference 10 Conference Split 10 Swap 10 Call Forward 11 Call Forward - Remote 12 Call Forward - End Chaining 13 Call Forward - Override 13 Messaging - Advisory.
-1- ABOUT YOUR PHONE The Mitel Networks 5010 IP has eight fixed-function keys ( SUPERKEY, MESSAGE, HOLD, CANCEL, TRAN SFER/CONFERENCE, REDIAL, , ) and seven personal keys with built-in st atus indicators.
-2- For Users on Resilient 3300 ICP Systems If durin g a call, you hear two beeps repeated every 20 second s it means that your phone is switching to a second ary 3300 ICP system. The call continues and there is a change in the operation of some keys and features on your phone.
-3-.
-4- Changing Handsets Your 5010 IP telephone is compatible with several specia lty handsets. To remove the handset shipped with your set from the handset cord: 1. Bend a paper clip to produce approx imately 4 cm (1.5 in.) of straight wire. 2. On the handset, locate the plastic groove leading into the handset jack.
-5- Speaker Volume Control To adjust the Speaker Volume when making an on-hook call or when listening to background music: z Press , or ) . Display Contrast Control To adjust the Display Contrast while your set is idle: z Press , or ) . Feature Keys To display information abou t a key: 1.
-6- MAKING AND ANSWERING CALLS Make a call 1. Lift the handset. 2. If you want to use a Non-Prime Li ne, press a Line Ap pearance key. 3. Dial the number, - OR - Press a Speed Call key - OR - Press REDIAL . Answer a call z Lift the handset. - OR - Press the flashing Line appe ar ance key and lift the handset.
-7- Speed Call Keys You may use Speed Call Keys to make a call or to send a string of digits during a call (press a Speed Call Key during a call to send a multi-digit password, for instance). To dial a stored Speed Call number: 1. Lift the handset. 2.
-8- Speed Call - Personal To dial a stored person al Speed Call number: 1. Lift the handset. 2. Dial *58 . 3. Enter an index number between 00 and 09 . To store a personal Speed Call number: 1. Lift the handset. 2. Dial *67 . 3. Enter an index number between 00 and 09 .
-9- CALL HANDLING Hold To place a call on Hold: z Press Hold . To retrieve a call from Hold: 1. Lift the handset. 2. Press the flashing line key. To retrieve a call from Ho ld at another station: z Press the flashing line key. - OR - Dial **1 and the number of the station that placed the call on Hold.
-10- Conference To form a Conference when a two-party call is al rea dy in place, or to add another party to an existing Conference: 1. Press TRANS/CONF . 2. Dial the number of the next party. 3. Wait for an answer. 4. Press TRANS/CONF . To leave a Conference: z Hang up.
-11- Call Forward Call Forward lets you redirect incoming calls to an alternate number. Always redirects all incoming calls regardless of the state of your telephone. B-Int redirects internal calls when your telephone is busy, and B-Ext redirects external calls when your telephone is busy.
-12- Call Forward - Remote To forward calls from a remote st ation to your current location: 1. Press SUPERKEY . 2. Press # until "Call Forwarding?" appears. 3. Press * . 4. Press # until "I'm Here?" appears. 5. Press * . 6. If a number is alre ady programmed, p ress * .
-13- Call Forward - End Chaining To ensure that calls do not get fo rwarded again by the destination number: 1. Lift the handset. 2. Dial 64 . 3. Hang up. To again allow calls to be forwarded by the destination number: 1. Lift the handset. 2. Dial **73 .
-14- Messaging - Callback To leave a Callback Message on a te lephone when you hear busy or ringback tone: z Press MESSAGE . To respond to a message waiting condition on your telephone: 1. Press MESSAGE . 2. Do one of the following: To call the message sender, press # .
-15- USING ADVANCED FEATURES Account Codes To use Forced Account Codes: 1. Lift the handset. 2. Dial the Account Code digits. 3. Press # . To enter an Account Code during a call: 1. Press TRANS/CONF . 2. Dial **3 . 3. Dial the Account Code digits. 4. Press # .
-16- Call Park The Call Park feature allows you to place a ca ll in a special ho ld state . You, or someone else, can then retrieve the call from any extension in the system. After parki ng the call, the syst em can automatically connect you to paging equipment so that you can announce the call to the requested party.
-17- Call Pickup To answer a call that is ringing at another station in your Pickup Group: 1. Lift the handset. 2. Press the Pickup feature key. To answer a call that is ringing at a station not in your Pickup Group: 1. Lift the handset. 2. Dial **6 .
-18- Override To use Override when you en counter busy or DND tone: z Press the Intrude feature key. Paging To use Paging: 1. Lift handset. 2. Press the Pager feature key. 3. Dial the Paging zone number (if required). 4. Make the announcement. Direct Paging Direct Paging allows you to page a pa rty through their tele phone speaker.
-19- Headset Operation To enable Headset Operation: z Press the Headset feature key. To answer a call (when Auto Answer is disabled): z Press the flashing li ne key. To hang up: z Press CANCEL . To disable Headset Operation: z Press the Headset feature key.
-20- Headset Operation (with Feature Control Switch) IMPORTANT NOTE: Mitel Networks Headsets wi th Feature Control Switch (PN9132-800-500-NA/9132-800- 501-NA) must be insta lled in the dedicated headset jack (the jack nearest the fron t of the set). Installation will disable your handset microphone.
-21- Group Paging / Meet Me Answer Group Paging allows you to page a group of telephones through their built-in speakers. You can belong to to as many as three paging groups with one group designated as your "prime" group.
-22- Record a Call This feature uses your voice mail system to record your telephone conversations. Note: You may be required by law to in form the other party that you are recording the conversation. For specific instructions, co nsult your system administrator.
-23- Hot Desking Hot Desking allows you to log into the telephone system from any phone designated as a Hot Desk phone. Simp ly log in at the phone using your assigned Hot Desk User Extension Number a.
-24- Tag Call Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the tag, your system administrator or telephone company can identify the so urce of the call and prov ide this info rmation to appropriate personnel or authorities.
-25- Call History Call Histor y k eeps track of the nam e s (if available) and telephone numbers of missed calls, answered incoming ex ternal calls, an d outgoing ex ternal calls. Once enabled on your phone by yo ur system administrator, it functions automatically.
-26- To delete all missed, answered, or outgoing call logs: 1. After selecting the type of logs you wish to delete, press the # key (Delet e All). 2. Confirm that you do want to de lete all items by pressing the * key (Yes). To delete a particular call from th e call log: 1.
.
TM , ® T r ademark of Mit el Net works C orporati on. © C o py r i ght 20 0 6 , M i t e l N et w o r ks C or p o r at i o n . All righ ts rese rved..
Een belangrijk punt na aankoop van elk apparaat Mitel 5010 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mitel 5010 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mitel 5010 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mitel 5010 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mitel 5010 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mitel 5010 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mitel 5010 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mitel 5010 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
