Gebruiksaanwijzing /service van het product 10/100 van de fabrikant Asante Technologies
Ga naar pagina of 38
AsantéF AST ™ 10/100 and AsantéNIC ™ -PCI PCI Ethernet Adapter Installation Guide.
.
AsantéF AST ™ 10/100 and AsantéNIC ™ -PCI PCI Ethernet Adapter Installation Guide Asanté T echnologies, Inc. 821 Fox Lane San Jose, CA 95131 November 1995 Part Number 06-00220-01 Rev .
Copyr ight Notice Copyright 1995 b y Asanté T echnologies, Inc. All rights reser ved. No par t of this manual, or any associated artwor k, software, pr oduct design or design concept, ma y be copied,.
DRAFT T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 AsantéF AST 10/100 Adapter for PCI .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . .
DRAFT 1 Intr oduction Conv entions This manual describes the installation procedures for tw o products: ❏ AsantéF AST 10/100 adapter for PCI ❏ AsantéNIC-PCI adapter It also applies to two platf or ms: ❏ PC compatible ❏ Apple P ower Macintosh Most of the information applies to both products and platf or ms.
Page 1-2 Introduction The AsantéF AST 10/100 adapter for PCI f eatures are: ❏ 32-bit bus mastering design allows maximum through- put without loading the host CPU. ❏ Installs easily with plug and pla y auto-configuration through the PCI BIOS (system R OM).
Page 1-3 PCI Local Bus The AsantéNIC-PCI adapter f eatures are: ❏ 32-bit bus-mastering design provides maximum through- put without loading the host CPU. ❏ 132 Mbps data transf er rate through the 32-bit PCI bus. ❏ Easy to install - plug and play self-configur ation.
Page 1-4 Introduction One of the advantages of the PCI bus is that it is pr ocessor independent. The Asanté PCI adapters are capable of working with both PCI-based PC and P ower Macintosh computers. PCI devices are also self configuring, making them very easy to install and use.
2 Installing the Asanté PCI Adapter Installing the Adapter The follo wing instr uctions explain ho w to install the Asanté PCI adapter . ∆ Note: Y ou do not need to set any jumpers or switches on the adapter . 1 T ur n the power off and remove the computer co ver .
Page 2-2 Installing the Asanté PCI Adapter Connecting the Adapter to the Networ k The AsantéF AST 10/100 adapter provides a single RJ-45 port for connecting the adapter to your netw ork. Using NW ay™ auto-neg otiation, the adapter will sense the hub's speed and set the adapter to run at either 10Mbps or 100Mbps.
Page 2-3 Configuring the Adapter Configur ing the Adapter Self-Configuring the Adapter One of the advantages of PCI is that all of its devices ar e self-configur ing. The Asanté PCI adapter is designed to utilize this featur e. T o configure the adapter , plug it into a PCI slot with bus-mastering capa bil- ity .
Page 2-4 Installing the Asanté PCI Adapter This means that after power up initialization, the adapter will automatically connect at the appropriate speed (10Mbps or 100Mbps) and/or Full Duplex without user inter vention. The Full Duple x operation can only be configur ed with a hub or a switc h product that supports it.
3 Installing Network Drivers Netw ork Operating Systems Supported After installing, configur ing and testing the Asanté PCI adapter , you ar e ready to install networ k dr ivers and work with y our network operating system.
Page 3-2 Installing Network Drivers Installing Netw ork Specific Driver s Nov ell NetW are 3.x Client This section shows you ho w to install Novell NetW are version 3.
Page 3-3 Installing Network Specific Drivers 8 Remove the Driver Disk fr om the flopp y drive. 9 Restart your computer . 10 T o run NetW are, type the follo wing four commands, (in the fol- lowing sequence) at the C:NETWARE prompt: LSL ASANTPCI IPXODI NETX 11 Change to the netw ork drive (usually F), and log in to your net- work .
Page 3-4 Installing Network Drivers 8 When prompted, insert the appropr iate NetW are Client Install disk and press Enter . 9 Press Enter to e xit to the DOS prompt.
Page 3-5 Installing Network Specific Drivers 10 In the “Cop y manufacturer's files from:” te xt box, type: A:WIN95 11 Click OK button. 12 Select “ AsantéF AST Ether net Adapter” then click OK. 13 Click OK button in the Netw ork window .
Page 3-6 Installing Network Drivers 10 Select Unlisted or Updated Networ k Adapter from the list. 11 Click the OK button or press Enter . The Install Driver window appears. 12 Insert the Asanté Driver Disk into drive A. 13 T ype the follo wing in the text box: A:WFW (The te xt A: may already be pr ovided for you.
Page 3-7 Installing Network Specific Drivers 25 T ype the follo wing in the text box: A:WFW (The te xt A: may already be pr ovided for you.) 26 Click the OK button or press Enter . A message window appears stating that Networ k Setup has mod- ified the CONFIG.
Page 3-8 Installing Network Drivers A:WIN_NT35 (if you’ re using Windows NT version 3.5) 8 Press Enter . The Select OEM Option window appears with AsantéF AST 10/100 Adapter or AsantéNIC-PCI Adapter as options. 9 Select the appropriate PCI adapter .
Page 3-9 Installing Network Specific Drivers 3 Double-clic k the AsantéF AST Installer icon or the AsantéNIC-PCI Installer icon and click OK when the Installer banner appears. 4 The Easy Install dialog box then appear s. ➪ Important: T o properly install the Open T ransport driver , you must use the Installer progr am.
Page 3-10 Installing Network Drivers 12 Click Sav e. ∆ Note: T o verify the Ethernet connection, you can use the Chooser . This displays the availability of networ k printer s, file ser vers, and/or shared disks, verifying that you are connected to the netw ork.
4 T r oubleshooting LED Indicator s Overview The figure below shows the LED indicators that illustrate the presence of Link Integrity (LI), Data T raffic (TX), 100Mbps operation and 10Mbps opera- tion for installation v er ification and diagnostic purposes.
Page 4-2 T roubleshooting Link Integrity LED (AsantéF AST 10/100 and AsantéNIC-PCI) The green Link Integ r ity (LI) LED indicates a valid connection to the net- wor k. If link integ r ity is not detected, there is a link failure and the LI LED will be off.
Page 4-3 LED Indicators 100Mbps Operation LED (AsantéF AST 10/100 Onl y) The green 100Mbps (100) LED indicates the configur ation of the adapter for 100Mbps (100BASE-TX) operation. 10Mbps Operation LED (AsantéF AST 10/100 Onl y) The amber 10Mbps (10) LED indicates the configuration of the adapter f or 10Mbps (10BASE-T) operation.
Page 4-4 T roubleshooting Using the Diagnostic Progr am The diagnostic program runs diagnostic tests to help you identify problems on the adapter and provides configuration inf ormation on your adapter . PC Diagnostic Program T o run the dia gnostic progr am on your PC, follow the procedur e below .
Page 4-5 Using the Diagnostic Program If a test fails, chec k that the adapter is seated properly in a PCI bus-mastering slot or tr y installing the adapter in a dif ferent PCI slot and run the tests a gain. 8 Press an y ke y to return to the menu option screen.
Page 4-6 T roubleshooting 8 Double-clic k the AsantéF AST™ T roubleshooter icon or the AsantéNIC-PCI T roubleshooter icon to start the progr am. 9 Click the OK button in the T roubleshooter startup screen.
Page 4-7 Using the Diagnostic Program A dialog box appear s asking whether you want to sav e chang es. 19 Click Sav e. T o run the Asanté Driver Local Statistics (ADLS) progr am on your Po wer Macintosh to display the configur ation information on the adapter , f ollow the procedure below .
Page 4-8 T roubleshooting.
A Specifications AsantéF AST 10/100 Adapter AsantéNIC-PCI Adapter Systems Supported Systems Supported ❏ PCI Local Bus PCs ❏ PCI Local Bus PCs ❏ PCI-based Po wer Macintoshes ❏ PCI-based Po w.
Page A-2 Specifications 100BASE-TX Link Specifications 10BASE-T Link Specifications ❏ Cable: 2 pair s of Categor y 5 unshielded twisted pair or shielded twisted pair (ISO 11801 or ANSI/EIA/TIA 568A) ❏ Cable: 2 pair s of Categor y 3,4 or 5 unshielded twisted pair ❏ Maximum Length: 100 m (328 ft.
B T echnical Support Contacting T ec hnical Suppor t T o contact Asanté T echnical Support: T ec hnical Suppor t Hour s 6:-00 AM to 6:00 PM P acific Standard Time USA, Monday-Friday T elephone (800).
Page B-2.
.
ASANTÉ TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA 95131 PHONE: 408.435.8388, 800.662.9686 • FAX: 408.432.7511, APPLELINK: ASANTE.SALES, e-mail address: sales@asante.com ©1995 Asanté Technologies Inc., Asanté is a trademark of Asanté T echnologies, Inc.
Een belangrijk punt na aankoop van elk apparaat Asante Technologies 10/100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asante Technologies 10/100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asante Technologies 10/100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asante Technologies 10/100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asante Technologies 10/100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asante Technologies 10/100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asante Technologies 10/100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asante Technologies 10/100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
