Gebruiksaanwijzing /service van het product 8FP Series van de fabrikant Multiquip
Ga naar pagina of 74
OPERATION AND PARTS MANUAL Electric and Gasoline Floor Planers Model 8FP Series Revision #2 ( 05/28/09 ) T o find the latest revision of this publication, visit our website at: www .
.
TABLE OF CONTENTS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 3 MULTIQUIP FLOOR PLANERS 8FP SERIES Table Of Contents .......................................................................................................
TABLE OF CONTENTS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 4 Storage ........................................................................................................................ ......................... 46 Specific ations .
8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 5 NOTE PAGE.
PARTS PARTS ORDERING PROCEDURES 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 6 www .m ultiquip .com Or dering par ts has never been easier! Choose from thr ee easy option.
NOTICE TO OPERATORS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 7 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE FACT ORY FOR PROPER ASSISTANCE BEFORE ATTEMPTING TO OPERATE THIS PRODUCT.
NOTICE TO OPERATORS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 8 The concept of frame mounted type FLOOR PLANERs has been successfully utilized for many years as a practical solution to many types of random FLOOR PLANER requirements.
OPERATOR INSTRUCTIONAL DATA SHEET 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 9 The following undersigned oper a tors of the 8FP Series FLOOR PLANERS described a nd/or p.
SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 10 THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMON SENSE GUIDES TO PROMOTE SAFETY AND EFFICIENCY WITH THE FLOOR PLANER.
SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 11 6) Prolonged use of the FLOOR PLANER (or other, simil a r m a chines) exposes the oper a tor to vibr a tions which m a y produce Whitefinger Dise a se (R a yn a ud's Phenomenon).
SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 12 13) Never exceed the recommended c a p a cities of the FLOOR PLANER. Refer to the Specifications section of this m a nu a l for more det a iled inform a tion.
SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 13 skill/common sense m a y dict a te th a t a different type of m a chine (with ch a r a cteristics of hi.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 14 Assembly The 8FP Series Floor Pl a ner a re shipped from the f a ctory secured on a speci a lly designed wooden p a llet a nd protected from extern a l d a m a ge by a corrug a ted c a rton or wood cr a te.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 15 3) Using the funnel, fill the fuel t a nk with fresh, cle a n fuel a ccording to the specific a tions outlined in the m a teri a l supplied by the engine m a nuf a cturer.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 16 the use of a n a ggressive fl a il configur a tion bec a use of productivity a nd cost consider a tions. Less a ggressive fl a il configur a tions c a n then be utilized for the fin a l finishing sequence.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 17 Suggested Applic a tions: 1) Medium duty a sph a lt a nd concrete milling. 2) Desc a ling steel decks. 3) Removing thick m a teri a l build-ups of gre a ses, p a ints, oils, veget a ble powders a nd resins from non- wood type floors.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 18 Suggested Applic a tions: 1) Removing synthetic co a tings, thermopl a stic a nd cold pl a stic m a rking a nd lines from concrete a nd a sph a ltic surf a ces.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 19 FIGURE 8 Problems encountered by uneven component wear 1) In a dequ a te free pl a y exists between the fl a ils/sp a cer w a shers a nd the support pl a tes of the fl a il drum.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 20 TREATMENT PROCESS AND COMPROMISE THE STRUCTURAL INTEGRITY, RESULTING IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 21 FIGURE 13 The most widely used drum is of the two-section design . FIGURE 14. It incorpor a tes two h a lf sectioned side pl a tes th a t a re positioned on the center sh a ft to f a cilit a te optimum fl a il sp a cing.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 22 2) Inst a ll a sp a cer w a sher next to the outside side pl a te of the wide section. Next, inst a ll a fl a il. Follow with a sp a cer w a sher a nd continue the sequence until the section is full.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 23 General Notes Regarding the Installation of Flails 1) Bec a use of v a ri a nce in m a te.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 24 oper a tor h a ndle counterclockwise to r a ise the Floor Pl a ner to its m a ximum height position a bove the work surf a ce.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 25 a mech a nic a l device incorpor a ting a ch a in a nd suit a ble a tt a chment device. The loc a tion of the lifting b a il m a y not a lw a ys loc a te the ex a ct position of the center of gr a vity for the Floor Pl a ner.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 26 To minimize the volt a ge drop to the motor, a ll extension cords should be copper str a nded, 8 AWG or l a rger. A NEMA 6-20R twist lock type recept a cle is provided with the 8FP/E Series Floor Pl a ner a s a st a nd a rd a ccessory.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 27 DANGER AS SOON AS THE ELECTRIC MOTOR HAS STARTED, THE OPERATOR MUST BE IN A POSITION TO ASSUME DIRECT AND FULL CONTROL OF THE FLOOR PLANER. FAILURE TO ASSUME DIRECT AND FULL CONTROL CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 28 DANGER DO NOT OPERATE A GASOLINE ENGINE IN CLOSED SPACES WITHOUT PROPER VENTILATION. GASOLINE ENGINES PRODUCE CARBON MONOXIDE FUMES. BREATHING CARBON MONOXIDE FUMES CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 29 a different process a nd c a n not be a chieved with the Floor Pl a ner. 4) The The Floor Pl a ner fe a tures a "down feed" type design for the fl a il drum.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 30 Dust a nd other p a rticle cont a min a tion c a n be controlled by the following methods: a ) The Floor Pl a ner is equipped with a 1-1/2 or 3 inch outside di a meter v a cuum tube a d a ptor.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 31 EXERCISE EXTREME CAUTION WHEN UTILIZING ANY SOLVENT TO REMOVE ACCUMULATED MATERIALS FROM THE SURFACES OF THE MACHINE AND RELATED COMPONENTS.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 32 OR EXTENSION CORD BEFORE PERFORMING ANY MAINTENANCE TO THE FLOOR PLANER. RECONNECT THE SPARK PLUG BEFORE RESTARTING THE ENGINE. IF ELECTRIC MOTOR EQUIPPED, TURN THE ON/OFF SWITCH TO THE OFF POSITION BEFORE RECONNECTING THE EXTENSION CORD.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 33 FIGURE 33 INSTALLING A REPLACEMENT V-BELT OR PULLEY Application: As Specified. Tools Required: 1 e a ch, 7/16 inch wrench. 2 e a ch, 1/2 inch wrenches.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 34 FIGURE 35 d) T a p the pulley/bushing a ssembly a g a inst the sh a ft shoulder with the soft h a mmer. e) Tighten the 1/4 inch di a meter c a pscrews progressively with a torque wrench to 95 inch pounds.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 35 FIGURE 38. 11) If the Floor Pl a ner is powered by a n engine, reconnect the engine sp a rk plug wire.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 36 8) Cle a n a nd inspect the drivesh a ft a nd housing for we a r a nd d a m a ge. If a ny d a m a ge is evident, repl a ce the a pplic a ble component.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 37 FIGURE 44 10) Mount the be a ring block/drivesh a ft a ssembly to the m a in fr a me. Tighten the 3/8 inch self-locking hex nuts with the torque wrench to 35 ft lbs (47 Nm.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 38 FIGURE 46 7) Cle a n a nd inspect the intern a l hex a gon bushing for d a m a ge a nd excessive we a r. Repl a ce the bushing if required. 8) Position the be a ring block on the a rbor press with the be a ring f a cing down.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 39 FIGURE 49 13) Mount the be a ring block to the a ccess pl a te. Tighten the 3/8 inch self locking hex a gon nuts with the torque wrench to 35 ft lbs (47Nm.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 40 ALIGNING THE CASTER WHEELS. Application: All Models. Tools Required: 1 e a ch, 16 inch minimum length str a ightedge 2 e a ch, 3/4 inch wrenches 1 e a ch, torque wrench, 85 ft lbs (115 Nm.
ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 41 FIGURE 53 7) Repe a t Step 5 to determine th a t a lignment did not ch a nge while tightening the f a steners. If a lignment did ch a nge, repe a t Steps 2 thru 6 until s a tisf a ctory results h a ve been a chieved.
8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 42 NOTE PAGE.
MAINTENANCE/SERVICE 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 43 ELECTRIC MOTOR SERVICE. Application: 8FP/E Series Floor Planer. The electric motor is c a p a ble of oper a ting for m a ny ye a rs with a re a son a bly sm a ll a mount of m a inten a nce.
TROUBLESHOOTING 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 44 Troubleshooting ELECTRIC MOTOR. Application: 8FP/E Series Floor Planer. MOTOR FAILS TO START ON/OFF switch in the OFF position. Turn the switch to the ON position.
TROUBLESHOOTING 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 45 EXCESSIVE JUMPING ON THE WORK SURFACE Excessive cutting depth for the feed/tr a vel r a te. R a ise the fl a il drum a nd m a ke multiple, sh a llow p a sses inste a d.
STORAGE 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 46 Storage Application: All Models. Proper procedure for long term stor a ge of the Floor Pl a ner will protect it a g a inst the effect s of corrosion a nd d a m a ge.
SPECIFICATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 47 Specifications FRAME STRUCTURE................................................................................. Uniti zed, Welded Steel Pl a te DRIVE REDUCTION SYST EM .
EXPLANATION OF CODE IN REMARKS COLUMN 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 48 The f ollowing s ection e xpl a in s the different s ym b ol s a nd rem a rk s us ed in the P a rt s s ection of thi s m a n ua l.
ASSEMBLY INSTRUCTIONS/OPERATIONS SUGGESTED SPARE PARTS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 49 8FP FLOOR PLANER SERIES 1 TO 3 UNIT Gasoline Model Honda GX160KQXC9 Qty. P/N Description 1 ............. SP8-0600 ....
ASSEMBLY INSTRUCTIONS/OPERATIONS MAIN FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 50 MAIN FRAME ASSY..
ASSEMBLY INSTRUCTIONS/OPERATIONS MAIN FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 51 MAIN FRAME ASSY. NO.
ASSEMBLY INSTRUCTIONS/OPERATIONS DRIVESHAFT ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 52 DRIVESHAFT ASSY..
ASSEMBLY INSTRUCTIONS/OPERATIONS DRIVESHAFT ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 53 DRIVESHAFT ASSY NO. PART NO.
ASSEMBLY INSTRUCTIONS/OPERATIONS REAR FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 54 REAR FRAME ASSY `.
ASSEMBLY INSTRUCTIONS/OPERATIONS REAR FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 55 REAR FRAME ASSY NO. PART NO. PART NAME QTY. REMARKS 1 SP8-0091A REAR FRAME MOUNT ASSEMBLY ..............................
ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( GASOLINE ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 56 OPERATOR HANDLE ASSY (GASOLINE).
ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( GASOLINE ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 57 OPERATOR HANDLE ASSY (GASOLINE) NO.
ASSEMBLY INSTRUCTIONS/OPERATIONS GASOLINE ENGINE ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 58 GASOLINE ENGINE ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS GASOLINE ENGINE ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 59 GASOLINE ENGINE ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( ELECTRIC ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 60 OPERATOR HANDLE ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( ELECTRIC ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 61 OPERATOR HANDLE ASSY (ELECTRIC) NO.
ASSEMBLY INSTRUCTIONS/OPERATIONS ELECTRIC MOTOR ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 62 ELECTRIC MOTOR ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS ELECTRIC MOTOR ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 63 ELECTRIC MOTOR ASSY NO.
ASSEMBLY INSTRUCTIONS/OPERATIONS ONE SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 64 ONE SECTION DRUM ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS ONE SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 65 ONE SECTION DRUM ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS TWO SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 66 TWO SECTION DRUM ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS TWO SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 67 TWO SECTION DRUM ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS FLAILS , SPACERS AND WASHERS ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 68 FLAILS & SPACER WASHERS ASSY.
ASSEMBLY INSTRUCTIONS/OPERATIONS FLAILS , SPACERS AND WASHERS ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 69 FLAILS, SPACERS AND WASHERS ASSY.
DECALS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 70.
DECALS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 71 DECALS. NO. PART NO. PART NAME QTY. REMARKS 1 29020-045 DECAL: WARNING (EYE AND EAR) 1 2 29020-046 DECAL: WARNING (.
Effective : July 15, 2003 TERMS AND CONDITION OF SALE— PARTS Effective: February 22, 2006 TERMS AND CONDITION OF SALE — PARTS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 72 PAY M E N T T E R M S Te r m s of p a yment for p a rt s a re net 3 0 d a y s .
NOTE PAGE 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 73.
OPERATION AND PARTS MANUAL Yo u r Loc a l De a ler i s : HERE’S HOW TO GET HELP PLEA S E HA VE THE MODEL AND S ERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC. M u lti qu ip Inc a nd the MQ logo a re regi s tered tr a dem a rk s of M u lti qu ip Inc.
Een belangrijk punt na aankoop van elk apparaat Multiquip 8FP Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Multiquip 8FP Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Multiquip 8FP Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Multiquip 8FP Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Multiquip 8FP Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Multiquip 8FP Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Multiquip 8FP Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Multiquip 8FP Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
