Gebruiksaanwijzing /service van het product EF30G van de fabrikant Napoleon Fireplaces
Ga naar pagina of 20
1 W415-0760 / 12.19.08 $10.00 INST ALLER: LEA VE THIS MANUAL WITH THE APPLIANCE CONSUMER: RET AIN THIS MANUAL FOR FUTURE REFERENCE INST ALLA TION AND OPERA TION INSTRUC TIONS W olf Steel Ltd ., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada s (705)721-1212 s fax(705)722-6031 ww w .
W415-0760 / 12.19.08 2 • Do not operate fireplace before reading and understanding operating instructions. Failure to operate fireplace according to operating instructions could cause fire or injury . • Risk of burns. The fireplace should be turned of f and cooled before servicing.
3 W415-0760 / 12.19.08 Electrical components and wearable parts such as fan/heater , motors, switches, nylon bearing components and remote controls are covered and NAPOLEON® will provide replacement parts free of charge during the first year of limited warranty .
W415-0760 / 12.19.08 4 This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured homes when installed according to theses instructions. 1.2.1 Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet are on.
5 W415-0760 / 12.19.08 1.3.5 Do not operate this appliance with a damaged cord or plug after the appliance malfunctions, has been dropped or damaged in any manner . Return appliance to authorized service facility for examination, electrical or mechanical adjustment, or repair .
W415-0760 / 12.19.08 6 T op View Rating Plate and Serial Number Back View Power Cord and Thermostat 30.375” 26.500” Side View 32.250” Heater vents - DO NOT COVER 10.250” 1 1.000” 30.000” ! W ARNING Heater vents and air openings can not be covered in any circumstances.
7 W415-0760 / 12.19.08 3.0 electrical requirements This appliance is for use on 120 V olts. The cord has a plug as shown in (A) of Figure 1 given below . An adapter as shown in (C) is available for connecting three-blade grounding type plugs to two-slot receptacles.
W415-0760 / 12.19.08 8 2 3 5W IF YOU PUT IN THE TEMPERATURE SENSOR ON THE WALL.PLS CHOOSE 2 IF YOU USE THE TEMPERATURE SENSOR.PLS CHOOSE 1 2 1 TEMPERATURE CONTROL SWITCH t 1 0 -10 5 -5 4-4 1 0 - 10 1 -1 9-9 6 -6 2 -2 3 -3 1 2-1 2 8 -8 PTC t105 ! R EM O.
9 W415-0760 / 12.19.08 3.3.1 Remove cover plate located beside the power cord to reveal the 7/8” wire hole. Discard cover plate, screws and insert a box connector into the hole. 3.3.2 Remove the lower back panel from the appliance to expose wiring. 3.
W415-0760 / 12.19.08 10 BEFORE INST ALLA TION Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high trafc areas. NOTE: Follow all national and local electrical codes. This appliance can be installed into either an existing appliance opening or as new construction / renovation.
11 W415-0760 / 12.19.08 3.3.1 Once the site has been prepared, the appliance can be installed. 3.3.2 Make sure the main power switch is in the "OFF" position. 3.3.3 Plug the appliance into a 15-amp/120 V olt, grounded outlet. Use a CSA or UL approved surge protector .
W415-0760 / 12.19.08 12 3.5 thermost a t and thermal sensor inst alla tion This appliance has two options for heat control. First is a thermal controlled sensor , which comes plugged into the appliance beside the main power cord.
13 W415-0760 / 12.19.08 FIGURE 9 4.0 framing NOTE: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the appliance body , it is recommended that the walls of the appliance enclosure be “nished” (ie: dry - wall/sheetrock), as you would nish any other outside wall of a home.
W415-0760 / 12.19.08 14 A hearth is NOT necessary but is recommended for aesthetic purposes. The minimum distance from the top of the appliance that the mantel can be installed is 10", at any depth. 4.4.1 Power supply service must be completed prior to nishing to avoid reconstruction.
15 W415-0760 / 12.19.08 The controls are located on the bottom right corner of the appliance. 5.0.1 Plug in your electric appliance. 5.0.2 Main ON/OFF Power Switch and LED: - This switch is located on the right side of the control panel. The "|" indicates ON and "O" indicates OFF .
W415-0760 / 12.19.08 16 5.1.1 Plug in your electric appliance. 5.1.2 Make sure the appliance's main Power ON/OFF button is at the ON position! The remote control will NOT work if the main Power button is at the OFF position. 5.1.3 When operating the remote control, it must be directed towards the front of the appliance.
17 W415-0760 / 12.19.08 Mos t ha log en l ight bul bs are rate d to la st a ppro xima tel y 18 00 h ours . Li ke all ligh t bu lbs , ha loge n b ulbs req uire periodic replacement.
W415-0760 / 12.19.08 18 BACK PLA TE Bulbs with Spring Clips Flame Generation Cylinder Drum LOCA TE THE EMBER BED BULBS Back View of Inser t Mantel EMBER BED BULB REPLACEMENT 3 Screws On The Back 2 Screws On The Side 2 Screws On The Side 6.1.3 Remove spring clip.
19 W415-0760 / 12.19.08 For aftermarket sales and service please call 1-866-592-6667 NOTE: Care must be taken when removing and disposing of any broken glass or damaged compo- nents. Be sure to vacuum up any broken glass from inside the appliance before operation.
W415-0760 / 12.19.08 20 8.0 tr oubleshoo ting ! W ARNING T urn off the fireplace completely and let cool before servicing. Only a qualified service person should service and repair this electric fireplace. SYMPT OM Dim or no flame. Ember bed is not glowing or dimming.
Een belangrijk punt na aankoop van elk apparaat Napoleon Fireplaces EF30G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Napoleon Fireplaces EF30G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Napoleon Fireplaces EF30G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Napoleon Fireplaces EF30G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Napoleon Fireplaces EF30G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Napoleon Fireplaces EF30G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Napoleon Fireplaces EF30G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Napoleon Fireplaces EF30G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
