Gebruiksaanwijzing /service van het product 5500I van de fabrikant Navman
Ga naar pagina of 42
CHARTPLOTTERS NA VMAN Installation and Operation Manua l www .navman.com TRA CKER 5500, 5500i 5100 and 5100i TRACKER 5500 TRACKER 5500i TRACKER 5100i TRACKER 5100 English .
2 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN FCC St atement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation.
3 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Content s 1 Introduction ..................................................................................................... 6 1-1 Care ........................................
4 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 10 Routes .......................................................................................................... 22 10-1 Routes display ......................................
5 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN It is the owner's sole responsibility to install and use the instrument in a manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe boating practices.
6 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 1-2 Plug-in cards 1 Introduction TRACKER chartplotters NA VMAN’s TRACKER chartplotters are compact, ruggedly built, highly integrated navigation instruments. They have been designed to be easy to use.
7 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 1-3 Removing and replacing the display unit If the display unit is bracket mounted then the display unit can easily be removed and replaced for security or protection. Removing the display unit: 1 T urn the TRACKER of f by holding until the display turns off.
8 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 2 Basic operation Overview of the keys ESC Go back to an earlier menu or display . Any changes are ignored. DISP Show a menu of the main TRACKER displays. T o go to a display , select it from the menu (see section 2-2).
9 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 2-1 T urning on and off / auto power Auto power If the TRACKER is wired for auto power (see section 15-3), then the TRACKER automatically turns on and off with the boat power , and can not be turned on or off manually .
10 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 2-6 Simulate mode Simulate mode allows a user to become familiar with the TRACKER of f the water . In Simulate mode, the data from the GPS receiver and other sensors is ignored and the TRACKER generates this dat a internally to simulate the movement of the boat.
11 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 2-7 Navigating The TRACKER has two ways of navigating, going straight to a point or following a route. Enter waypoints at points of interest before starting to navigate (see section 9-2-1).
12 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 3 Chart 3-1-1 Chart modes The Chart has two modes, centre on boat mode and cursor mode. These are explained below . Centre on boat mode T o switch to centre on boat mode in the chart display , press ESC .
13 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 3-1-2 Latitude and longitude Latitude and longitude can be displayed at the top of the chart.
14 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 3-2 Dist ance and bearing calculator The distance and bearing calculator can plot a course of one or several legs and to show the bearing and length of each leg, as well as the total distance along the course.
15 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN If Projected course is turned on, then the TRACKER will display the projected position based on the course over ground (COG), speed and a specified time. T o turn Projected course on and off and to set the time, see section 13-2.
16 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN T o use the fuel display , the optional fuel kit must be installed and the fuel dat a set up (see section 13-4).
17 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 6 Highway display The highway display has a bird’s eye view of the boat’s course to a destination: T o go to the highway display , press DISP and select Highway . W arning: The highway display does not show land, dangerous waters or chart symbols.
18 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN that can be received by a special receiver on the boat. Differential beacons are usually only installed near ports and import ant waterways, and each beacon has a limited range.
19 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 8 Tides display The tides display shows tide information at a tide station for the selected date. T o go to the tides display for the tide station nearest to the boat, press DISP and select Tides .
20 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN T o go to the waypoint s display, press DISP and select Waypoints (see right). The waypoints display is a list of the waypoints that have been entered, each with waypoint symbol, name, latitude and longitude, distance and bearing from the boat, type and display option.
21 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 4 Change the waypoint data if necessary (see section 9-2-7). Select Save . Creating a new waypoint from the waypoints display 1 In the waypoints display , press MENU and select Create .
22 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Warning: A fter creating or changing a route, display the route on the chart and check that it does not cross land or dangerous water .
23 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN B. Creating a new route from the routes display 1 In the routes display , press MENU and select Create . 2 A new route, with a default name and no waypoints, is displayed. 3 T o change the route name: i Select the route name at the top of the display and press ENT .
24 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 1 1 User card display A C-MAP™ user card is an optional plug-in card that can store data files (see section 1-2). There are three types of files: waypoints, routes or a track.
25 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 12 About display T o go to the about display , press DISP and select About . The about display shows: The software version and date. The world chart version. Any card fitted. The number of waypoints, routes and tracks in the TRACKER.
26 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN System Language (English) Rotation (North up) Colours (Normal) Projected course (Off) Keybeep (On) CDI scale (0.1 nm) Factory reset Chart Plotter mode (Off) Map datum (WGS84) Map shift (None) W aypoints (Selected) Lat.
27 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 13-2 Chart setup Rotation The options for chart rotation are: North up : North is always at the top of the chart display . Track up : The chart is rotated so that the boat direction is to the top of the display .
28 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 13-3 DGPS setup Internal GPS Disable or enable the TRACKER’ s internal GPS receiver . Disable this if a non-standard GPS antenna that sends NMEA data is installed. DGPS Source Enables or disables the satellite based DGPS correction (see section 7).
29 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 13-5 T rack setup T racking records and displays the boat’ s course on the chart (see section 3-5). Record Of f : The TRACKER stops recording a track. 1 to 5 (select a track number): The TRACKER starts recording the boat’ s course into the selected track.
30 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 13-7 Unit s setup Distance unit s Options are nm (nautical miles), mi (statute miles) or km (kilometres). Speed units Options are kn (knots), mph (miles per hour) or kph (kilometres per hour).
31 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Simulate mode is a way of becoming familiar with the TRACKER (see section 2-6). W arning: Never have simulate mode on when the TRACKER is navigating on the water . Simulate T urn simulate mode Off or On .
32 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 15 Inst allation 15-1 What comes with the TRACKER St andard configuration TRACKER display unit, with a holder for plug- in cards and blanking cap for fuel connector . Dust cover for display unit.
33 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN 15-3 Inst allation W arning: Ensure that any cut holes will not weaken the boat.
34 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Power/data cable for display unit Wire the cable as shown on the next page. Note : The unit requires 12 V DC power. This power supply must be protected with a fuse or circuit breaker of between 2 and 3 A.
35 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN External GPS antenna (TRACKER 5500, 5100) Fuel transducer(s) (optional) Inst allation T o fuel tank T o engine Auto Power Wiring This option is possible on both the TRACKER 5100 and the TRACKER 5500.
36 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Physical Size 150 mm H x 164 mm W x 65 mm D (5.9" x 6.5" x 2.6"). Weight, display unit 600 g (20 oz). Display: 5" diagonal; TRACKER 5500, 5500i: TFT colour , (234 x 320 pixels); TRACKER 5100, 5100i: greyscale, (240 x 320 pixels).
37 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN ADINDAN AFGOOYE AIN EL ABD 70 AM.SAMOA 1962 ANNA 1 AS. 65 ANTIGUA AS. 43 ARC 1950 ARC 1960 AS.BEACON 'E’ AS.DOS 71/4 AS.STA TION 52 AS.TERN ISL. ASCENS.ISL.58 AUS.GEOD. 66 AUS.
38 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Appendix B - T roubleshooting This troubleshooting guide assumes that you have read and understood this manual. It is possible in many cases to solve difficulties without having to send the unit back to the manufacturer for repair .
39 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN c T ank Full or Set Remaining has not been set every refuelling. d When refuelling, air pockets may have prevented the tank filling completely . e Fuel transducers wear out over time and should be replaced every 5000 litres (1316 US gallons) of fuel as a guide.
40 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN Navigation data The boat is sailing from the start to the destination and has moved off the plotted course from the start to the destination. BRG Bearing to Destination Bearing to the destination from the boat.
119 TRACKER 5100/5100i/5500/5500i Manual de Instalação e Funcionamento NAVMAN NORTH AMERICA NAVMAN USA INC. 18 Pine St. Ext. Nashua, NH 03060. Ph: +1 603 577 9600 Fax: +1 603 577 4577 e-mail: sales@navmanusa.com OCEANIA New Zealand Absolute Marine Ltd.
80 NAVMAN MUL TI 3100 Installation and Operation Manual Lon 174° 44.535`E Lat 36° 48.404`S Made in New Zealand MN000089B NA VMAN TRACKER 5100/5100i5500/5500i.
Een belangrijk punt na aankoop van elk apparaat Navman 5500I (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Navman 5500I heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Navman 5500I vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Navman 5500I leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Navman 5500I krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Navman 5500I bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Navman 5500I kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Navman 5500I . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.