Gebruiksaanwijzing /service van het product WAG302 van de fabrikant NETGEAR
Ga naar pagina of 120
202-10078-0 1 202-10078-01 February 2005 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95 054 USA Phone 1-888-NETGEAR Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Poi.
ii 202-10078-0 1 T echnical Support Please register to obtain technical support . Please retain your proof of p urchase and warranty information. T o register your product, get product supp ort or obtain product information and product documentation, go to http://www .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 -iii 202-10078-01 Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 -iv 202-10078-01 FCC St atement DECLARA TION OF CONFORMITY We N e t g e a r, 4500 Great America Parkway Santa Clara, CA.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 -v 202-10078-01 • Reorient or locate th e re ce iving antenna. • Increase the sep aration betwee n the equipment and r eceiver . • Connect the equipment into an outle t on a circuit different from that to which the receiver is connected.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 -vi 202-10078-01 Product and Publication Det ails Model Number: WA G 3 0 2 Publication Date: February 2005 Product Fami.
Contents vii 202-10078-01 Content s Chapter 1 About This Manual Audience, Scope, Conventions, and Formats . ......... ................. ............. ................ ........ 1-1 How to Use This Manual ................. ................ .............
202-10078-0 1 viii Contents 802.1 1a Configuration ............ ................ ................ ............. ................ ............. 3-20 802.1 1b/g Configuration .. .... ... ... ... ............. ... .... ... ... ... .... ... ... ... .... .
Contents ix 202-10078-01 Enabling Wireless Bridging and Repeating ..... ... ................ ............. ............. ................ .. 5-9 How to Configure a W AG302 as a Point-to-P oint Bridge .................... ................ ... 5-10 How to Configure Multi-Point Wireless Bridging .
202-10078-0 1 x Contents What are the Key Features of WP A Securi ty? ... ............. ................. ............ ......... B-12 WP A Authentication: Enterprise-level User Authentication via 802.1x/EAP and RADIUS ...... ................ .........
About This Manual 1-1 202-10078-01 Chapter 1 About This Manual This chapter describes the intended audience, sc ope, conventions, and formats of this manual. Audience, Scope, Conventions, and Format s This reference manual assumes that the reader h as basic to interme diate computer and Internet skills.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 1-2 About This Manual 202-10078-01 How to Use This Manual The HTML version of this ma nual includes the following: • .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 About This Manual 1-3 202-10078-01 How to Print this Manual T o print this manual you can choose one of the fo llowing several options, a ccording to your nee ds. • Printing a Page in the HTML V iew .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 1-4 About This Manual 202-10078-01.
Introduction 2-1 202-10078-01 Chapter 2 Introduction This chapter introduces the NETGEAR W AG302 ProSafe Dual Band W ireless Access Point. Minimal prerequisites for installation are presented in “System Requirements” on page 2-5 .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 2-2 Introduction 202-10078-01 Key Features The W AG302 Access Point is easy-to-use and prov ides solid wireless and ne tw orking support. Supported S tandards and Conventions The following standards and conventions are supported: • S tandards Compliant .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Introduction 2-3 202-10078-01 • Access Control. The Access Control MAC address filteri ng feature can ensure that only trusted wireless stations can use the W AG302 to gain access to your LAN.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 2-4 Introduction 202-10078-01 802.1 1a/g St andards-based Wireless Networking The W AG302 ProSafe Dual Band W ireless Access Po int provides a bridge between Etherne t wired LANs and 802.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Introduction 2-5 202-10078-01 • WG51 1 802.1 1g 54 Mbps W ireless CardBus Adapter • WG1 1 1 801.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 2-6 Introduction 202-10078-01 Hardware Description Front Panel The W AG302 front an d rear hardwa re functions are described below . Figure 2-1: W AG302 front p anel The following table explai ns the L ED indicators: LED DESCRIPTION PWR Power Indicator Off No power .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Introduction 2-7 202-10078-01 Rear Panel Figure 2-2: W AG302 rear p anel • Left and Right De tachable Antenna The W AG302 provides two detachable antennas (2.4 GHz and 5 GHz).
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 2-8 Introduction 202-10078-01 • Restore to Factory Defaults Button The restore to default button located between the Ethernet RJ-45 connector and the power socket restores the W AG302 to the factory default se ttings .
Basic Installation and Configuration 3-1 202-10078-01 Chapter 3 Basic Inst allation and Configuration This chapter describes how to set up your W AG302 ProSafe Dual Band W ireless Access Point for wireless connectivity to your LA N. This basic configuration will enable computers with 802.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-2 Basic Installation and Configuration 202-10078-01 For best results, place your wireless access point: • Near the center of the area in which your PCs wil l operate.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-3 202-10078-01 Default Factory Settings When you first receive your W AG302, the default factory settings will be set as shown below .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-4 Basic Installation and Configuration 202-10078-01 Underst anding W AG302 Wireless Security Options Y our wireless data transmissions can be receiv ed well beyond your wa lls by anyone with a compatible adapter .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-5 202-10078-01 • Use WP A or WP A-PSK.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-6 Basic Installation and Configuration 202-10078-01 2C ONFIGURE LAN AND W IRELESS A CCESS a. Configure the W AG302 Ethernet port for LAN access. • Connect to the W AG3 02 by opening your bro wser and entering http://192.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-7 202-10078-01 • The W eb browser will then display the W AG302 General information page.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-8 Basic Installation and Configuration 202-10078-01 • Click the Basic Settings link to view the Basic Settings menu. Figure 3-4: Basic Sett ings menu • Configure the settings appropriate for your network.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-9 202-10078-01 – Country/Region : This field identifie s the region where the W AG302 can be used.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-10 Basic Installation and Configuration 202-10078-01 b. Click the W ireless Settings1 1a link in the Setup section of the main menu to view the W ireless Settings 1 1a menu.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-11 202-10078-01 Now that you have finished th e setup steps, you are ready to d eploy the W AG302 in yo ur network. If needed, you can now reconfigure the compute r you us ed in step 1 back to its original TCP/IP settings.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-12 Basic Installation and Configuration 202-10078-01 How to Log In to the W AG302 Using It s Default IP Address 1. 192.168.0.230 is the default IP address of your access point.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-13 202-10078-01 Underst anding Basic Wireless Settings Wireless Settings 1 1a T .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-14 Basic Installation and Configuration 202-10078-01 – A group of W ireless Stations and a single a ccess point, all using the same ID (SSID), form a Basic Service Set (BSS).
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-15 202-10078-01 – In “Infrastructure” mode, wireless stations normally scan all chan nels, looking for an access point. If more than one a ccess point can be used, the one with the strongest s ignal is used.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-16 Basic Installation and Configuration 202-10078-01 The W ireless Settings 1 1b/g menu options are disc ussed below: • Tu r n R a d i o O n . On by default, you can also turn off the radio to disable access through this device.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-17 202-10078-01 – 1 1g Only – Only 802.1 1g wireless stations can b e used. – 1 1b Only – All 802.1 1b wireless stations can be used.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-18 Basic Installation and Configuration 202-10078-01 Underst anding WEP/WP A Security Options The figure below identifies the various WEP/WP A security options. A full expla nation of these standards is available in Appendix B, “W ireless Networking Basics .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-19 202-10078-01 Note : Y ou must configure Radi us Server Settings (see Figure 3-13 on page 3-27 ) with either Legacy 802.1x or WP A with Radius option.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-20 Basic Installation and Configuration 202-10078-01 Before Y ou Change the SSID and WEP Settings 802.1 1a Configuration For a new wireless network, print or copy this form and fill in the configuration parameters.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-21 202-10078-01 802.1 1b/g Configuration For a new wireless network, print or copy this form and fill in the configuration parameters.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-22 Basic Installation and Configuration 202-10078-01 How to Set Up and T est B asic Wireless Connectivity Follow the instructions below to set up and te st basic wireless conne ctivity .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-23 202-10078-01 How to Restrict Wirele ss Access by MAC Address T o restric t access based on MA C addresses, follow thes e steps: 1.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-24 Basic Installation and Configuration 202-10078-01 3. The optional Access Control window lets you block the network access privilege of the specified stations through the W AG302 Access Po int.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-25 202-10078-01 2. Click the WEP/WP A Settings link in the main menu of the W AG302. Figure 3-12: WEP/WP A Settings menus for 1 1a and 1 1bg 3.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-26 Basic Installation and Configuration 202-10078-01 How to Configure WP A with Radius Note : Not all wireless adapters support WP A. Furthe rmore, client software is required on the client.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-27 202-10078-01 2. From the Security menu , click Radius Server Settings lin k to display the Radius Server Settings menu shown below .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-28 Basic Installation and Configuration 202-10078-01 • IP Address : The IP address of the Radius Server . The default is 0.0.0.0 • Port Number : Port number of the Radius Server .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-29 202-10078-01 How to Configure WP A-PSK Note : Not all wireless adapters support WP A. Furthe rmore, client software is required on the client.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-30 Basic Installation and Configuration 202-10078-01 Using the Basic IP Settings Options The Basic IP Settings menu is under the Basi c heading of the main menu. Use this menu to configure DHCP , static IP , and access point access point name se ttings.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Basic Installation and Configura tion 3-31 202-10078-01 If your network has a requirement to use a dif f erent IP addressing scheme, you can make those changes in this menu.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 3-32 Basic Installation and Configuration 202-10078-01.
Management 4-1 202-10078-01 Chapter 4 Management This chapter describes how to use the management features of your W AG302 ProSafe Dual Band W ireless Access Point. These features can be found by clicking on the Maintenance heading in the Main Menu of the browser i nterface.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-2 Management 202-10078-01 •S N M P – Enable SNMP to allow the SNMP network ma nagement software, such as HP OpenV iew , to manage the wireless access point via SNMPv1/v2 protocol.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Management 4-3 202-10078-01 4. Press the return key , and the screen below should appear . Figure 4-2: Secure T elnet C lient The login name is admin and password is the default password.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-4 Management 202-10078-01 Using Syslog and Activity Log Information The Information contains the ac tivity log link you can use for setting up a syslog server and viewing activity log information.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Management 4-5 202-10078-01 V iewing General and St atistical Information General Information The General information screen provides a su mmary of the current W AG302 configur ation settings.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-6 Management 202-10078-01 This screen shows the following parameters: T able 4-1. General Information Fields Field Descripti on Access Point Information Access Point Name (NetBIOS name) The default name may be changed if desired.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Management 4-7 202-10078-01 Current Wireless Settin gs 1 1b/g Access Point Mode Identifies the operating mode of the WAG302: Access Point, Point-to-point bridge, Multi-point bridge or Repeater.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-8 Management 202-10078-01 S t atistics The Information - S tatistic s screen provides various LAN and WLAN statistics. Figure 4-5: Wire less Access Point St atus screen T able 4-1.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Management 4-9 202-10078-01 V iewing a List of Att ached Devices The A vailable W ireless Station List contains a tabl e of all IP devices associated with the wireless access point in the wireless network defined by the W ireless Network Name (SSID).
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-10 Management 202-10078-01 Upgrading the Wireless Access Point Sof tware . Y ou cannot perform the firmware upgrade from a workstation co nnected to the W AG302 via a wireless link.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Management 4-11 202-10078-01 From the main menu Management heading, click the Backup/Restor e Settings link to bring up the menu shown below .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-12 Management 202-10078-01 Using the Reset Button to R estore Factory Default Settings T o restore the factory defaul.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Management 4-13 202-10078-01 Changing the Administrator Password The default password is password . Change this password to a mo re secure password. Y ou cannot change the administrator login name.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 4-14 Management 202-10078-01.
Advanced Configuration 5-1 202-10078-01 Chapter 5 Advanced Configuration This chapter describes how to configure the adva nced features of your W AG302 ProSafe Dual Band W ireless Access Point: • IP Settings : Use the AP as a DHCP server for wireless client s.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-2 Advanced Configuration 202-10078-01 Figure 5-1: Adv anced IP Settings for Wireless Client s screen Y ou may configure the Advanced IP Settings for W ireless Clients if you are a network system administrator .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Advanced Configur ation 5-3 202-10078-01 – Subnet Mask : The Access Point will assign the spec ified subnet mask to the connected wireless stations.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-4 Advanced Configuration 202-10078-01 Figure 5-2: Advanced Wi reless Settings menus for 1 1a and 1 1b/g AutoCell RF Management AutoCell provides advanced RF wireless manage ment features that improve performance and enhance security .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Advanced Configur ation 5-5 202-10078-01 Configuration Figure 5-3: Advanced Wi reless Settings screen AutoCell Setup opt.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-6 Advanced Configuration 202-10078-01 Enhanced RF Security ‘S tealth Mode’ In this mode, AutoCell shrinks the size of cove rage to the minimum to reach clients but also shrinks the size of the beacons that access points use to announce their presence.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Advanced Configur ation 5-7 202-10078-01 Additional AutoCell V iew Management Options Figure 5-4: AutoCell V iew wireles.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-8 Advanced Configuration 202-10078-01 Configuring Wireless LAN Parameters The default advanced wireless L AN parameter settings usually wor k well. If you want the AP to operate in Super -A/G mode, use this feature.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Advanced Configur ation 5-9 202-10078-01 Enabling Wireless Bridging and Repeating The W AG302 ProSafe Dual Band W ireless Acce ss Point lets you build lar ge bridged wireless networks.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-10 Advanced C onfiguration 202-10078-01 • Wir eless Point-to-Multi-Point Bridge : Select this only if this W AG302 is the "Master" for a group of Bridge-mode W ireless Stations.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Advanced Configur ation 5-11 202-10078-01 4. V erify connectivity across the LAN 1 and LAN 2.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-12 Advanced C onfiguration 202-10078-01 • All APs must be on the same LAN.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Advanced Configur ation 5-13 202-10078-01 How to Configure Wireless Repeating Figure 5-9: Multi-Point bridging 1. Configure the Operating Mode of the W AG302 Access Points.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 5-14 Advanced C onfiguration 202-10078-01 A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other P Cs or servers conn ected to any of the three WLAN segments.
Troubleshooting 6-1 202-10078-01 Chapter 6 T roubleshooting This chapter provides information about trou bleshooting your W AG302 ProSafe Dual Band W ireless Access Point. After each problem descriptio n, instructions are given to help you diagnose and solve the problem.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 6-2 Troubleshooting 202-10078-01 The Wireless LAN activity light does not light up. The access point’ s antennae are not working. • If the W ire less LAN activity light stays off, di sconnect the adapter from its power source and then plug it in again.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Troubleshooting 6-3 202-10078-01 I cannot connect to the W AG302 to configure it. Check these items: • The W AG302 is properly installed, LAN connec tions are OK, and it is powered on.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 6-4 Troubleshooting 202-10078-01 Using the Reset Button to Rest ore Factory Default Settings The Reset button (see “W AG302 rear panel” on page 2-7 ) has two functions: • Reboot.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Specifications A-1 202-10078-01 Appendix A S pecifications This appendix provides technical specifications for the W AG302 ProSafe Dual Band W ireless Access Point. S pecifications for the W AG302 Parameter W AG302 ProSafe Dual Band Wireless Access Point 802.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 A-2 Specifications 202-10078-01.
Wireless Networking Basics B-1 202-10078-01 Appendix B Wireless Networking Basics This chapter provides an overview of W ireless networking. Wireless Networking Overview The W AG302 Access Point conforms to the Institute of Electrical and Electronics Engineers (IEEE) 802.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-2 Wireless Networking B asics 202-10078-01 In the infrastructure mode, the wireless access poin t converts airwave data into wired Etherne t data, acting as a bridge between the wired LAN and wireless clients.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-3 202-10078-01 Authentication and WEP Dat a Encryption The absence of a ph ysical connection between no des makes the wireless links vulnerable to eavesdropping and information theft.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-4 Wireless Networking B asics 202-10078-01 • Shared Key Authentication requires that the station and the access point have the same WEP Key to authenticate. These two authentication procedures are described below .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-5 202-10078-01 5. The station co nn ec ts to the network.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-6 Wireless Networking B asics 202-10078-01 3. Use WEP for Authentication and Encryption: A transmitting 802.1 1 device encrypts the data portion of every packet it sends using a configur ed WEP Key .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-7 202-10078-01 Note: T ypically , 802.1 1 access points can store up to four 128-bit WEP Keys but some 8 02.1 1 client adapters can only store one.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-8 Wireless Networking B asics 202-10078-01 channels are 5 MHz apart. However , due to spread spectrum ef fect of the signals, a n ode sending signals using a particular channel will utilize frequency spectrum 12.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-9 202-10078-01 802.1 1a Wireless Channels IEEE 802.1 1a utilizes 300 MHz of bandwidth i n the 5 GHz Unlicensed National Information Infrastructure (U-NII) band .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-10 Wirele ss Network i ng Basics 202-10078-01 The W AG302 user can use five ch an nels in turbo mode. The available channels supported by the wirele ss products in various countries are different.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-11 202-10078-01 The W i-Fi Alliance is now perform ing interoperability certificatio n testing on W i-Fi Protected Access products. Starting August of 2003, all new Wi-Fi certified products will have to support WP A.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-12 Wirele ss Network i ng Basics 202-10078-01 How Does WP A Compare to IEEE 802.1 1i? WP A will be forward compatible with the IEEE 802.1 1i security specification currently under development.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-13 202-10078-01 The primary information conveyed in the Beacon frames is the authentication method and the cipher suite. Possible authentication methods in clude 802.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-14 Wirele ss Network i ng Basics 202-10078-01 WP A Authentication: Enterprise-level User Authentication via 802.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-15 202-10078-01 Figure B-4: 802.1x A uthenticat ion Sequenc e The AP sends Beacon Frames with WP A informatio n element to the stations in the service set.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-16 Wirele ss Network i ng Basics 202-10078-01 3. The client sends an EAP-response packet containing the identity to the authentication server .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-17 202-10078-01 T emporal Key Integrity Protocol (TKIP) WP A uses TKIP to provide important.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-18 Wirele ss Network i ng Basics 202-10078-01 Is WP A Perfect? WP A is not without its vulnerabiliti es. Specifically , it is susceptible to denial of service (DoS) attacks.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Wireless Networking Basics B-19 202-10078-01 Changes to Wireless Access Point s W irele ss access points must have their.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 B-20 Wirele ss Network i ng Basics 202-10078-01 Microsoft has worked with many wireless vend ors to embed the WP A fi rmware update in the wireless adapter driver .
Command Line Reference C-1 202-10078-01 Appendix C Command Line Reference The W AG302 ProS afe Dual B an d W i reless Access Poi n t (AP) can be configured either through the command line interface (CLI), a W eb browser, or an MIB browser .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 C-2 Command Line Reference 202-10078-01 get set del keyword Des cription --- --- --- ---------------------- ----- -----.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Command Line Refe rence C-3 202-10078-01 get set del keyword Des cription --- --- --- ---------------------- ----- -----.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 C-4 Command Line Reference 202-10078-01 get set del keyword Des cription --- --- --- ---------------------- ----- -----.
Glossary -1 202-10078-01 Glossary Use the list below to find definitions for technical terms used in this manual. 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over twisted pair wiring. 100BASE-Tx IEEE 802.3 specification for 100 Mbps Ethernet over twisted pair wiring.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 -2 Glossary 202-10078-01 ARP Address Resolution Protocol, a TCP/IP protocol used to convert an IP address into a physical address (called a DLC address), such as an Ethernet address.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Glossary -3 202-10078-01 DNS Short for Domain Name System (or Se rvice), an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they're easier to remember .
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 -4 Glossary 202-10078-01 IP Internet Protocol is the main internetwork ing protocol used in the Internet . Used in conjunction with the T ransfer Control Protocol (T CP ) to f orm TCP/IP .
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Glossary -5 202-10078-01 NA T A technique by which several hosts share a si ngle IP address for access to the Internet.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 -6 Glossary 202-10078-01 SSID A Service Set Identification is a thirty-two charact er (maximum) alphanumeric key identifying a wireless local area network.
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Glossary -7 202-10078-01 If a remote network contains a WINS server , your W indows PCs can gather information from that WINS server about its local hosts. This allows your PCs to browse th at rem ote netw ork using the W indows Network Neighb orhood feature.
Reference Manual for the NETGEAR ProSafe Dual Band Wir eless Access Point WAG302 -8 Glossary 202-10078-01.
Een belangrijk punt na aankoop van elk apparaat NETGEAR WAG302 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen NETGEAR WAG302 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens NETGEAR WAG302 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding NETGEAR WAG302 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over NETGEAR WAG302 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van NETGEAR WAG302 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de NETGEAR WAG302 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met NETGEAR WAG302 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.